Intel R1000SP User manual

Intel®Server System R1000SP Family
Service Guide
A Guide for Technically Qualified Assemblers of Intel® identified Subassemblies/Products
Order Number: G76656-001

Disclaimer
ii Intel®Server System R1000SP Service Guide
Disclaimer
Information in this document is provided in connection with Intel®products. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in
Intel®’s Terms and Conditions of Sale for such products, Intel®assumes no liability whatsoever, and Intel®
disclaims any express or implied warranty, relating to sale and/or use of Intel®products including liability or
warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright
or other intellectual property right. Intel®products are not designed, intended or authorized for use in any
medical, life saving, or life sustaining applications or for any other application in which the failure of the Intel®
product could create a situation where personal injury or death may occur. Intel®may make changes to
specifications and product descriptions at any time, without notice.
Intel®server boards contain a number of high-density VLSI and power delivery components that need
adequate airflow for cooling. Intel®’s own chassis are designed and tested to meet the intended thermal
requirements of these components when the fully integrated system is used together. It is the responsibility of
the system integrator that chooses not to use Intel®developed server building blocks to consult vendor
datasheets and operating parameters to determine the amount of airflow required for their specific application
and environmental conditions. Intel Corporation cannot be held responsible if components fail or the server
board does not operate correctly when used outside any of their published operating or non-operating limits.
Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its
subsidiaries in the United States and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2012 Intel Corporation. All Rights Reserved.

Safety Information
Intel®Server System R1000SP Service Guide iii
Safety Information
Important Safety Instructions
Read all caution and safety statements in this document before performing any of the instructions.
See also Intel®Server Boards and Server Chassis Safety Information on the Intel®Server
Deployment Toolkit 3.0 CD and/or at
http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.
Wichtige Sicherheitshinweise
Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor Sie eine
der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu Intel®-
Serverplatinen und Servergehäusen auf der Intel®Server Deployment Toolkit 3.0 CD oder unter
http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.
Consignes de sécurité
Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce document
avant de suivre toute instruction. Consultez Intel Server Boards and Server Chassis Safety
Information sur le Intel®Server Deployment Toolkit 3.0 CD ou bien rendez-vous sur le site
http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.
Instrucciones de seguridad importantes
Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar
cualquiera de las instrucciones. Vea Intel®Server Boards and Server Chassis Safety Information en
el Intel®Server Deployment Toolkit 3.0 CD y/o en
http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.
重要安全指导
在执行任何指令之前，请阅读本文档中的所有注意事项及安全声明。和/或
http://www.intel.com/support/motherboards/server/sb/cs-010770.htm 上的 Intel®Server Boards
and Server Chassis Safety Information（《Intel®服务器主板与服务器机箱安全信息》）。

Warnings
iv Intel®Server System R1000SP Service Guide
Warnings
Heed safety instructions: Before working with your server product, whether
you are using this guide or any other resource as a reference, pay close
attention to the safety instructions. You must adhere to the assembly
instructions in this guide to ensure and maintain compliance with existing
product certifications and approvals. Use only the described, regulated
components specified in this guide. Use of other products/components will
void the UL listing and other regulatory approvals of the product and will
most likely result in noncompliance with product regulations in the region(s)
in which the product is sold.
System power on/off: The power button DOES NOT turn off the system AC
power. To remove power from the system, you must unplug the AC power
cord from the wall outlet. Make sure the AC power cord is unplugged before
you open the chassis, add, or remove any components.
Hazardous conditions, devices and cables: Hazardous electrical conditions
may be present on power, telephone, and communication cables. Turn off the
server and disconnect the power cord, telecommunications systems, networks,
and modems attached to the server before opening it. Otherwise, personal
injury or equipment damage can result.
Electrostatic discharge (ESD) and ESD protection: ESD can damage disk
drives, boards, and other parts. We recommend that you perform all
procedures in this chapter only at an ESD workstation. If one is not available,
provide some ESD protection by wearing an antistatic wrist strap attached to
chassis groundany unpainted metal surfaceon your server when
handling parts.
ESD and handling boards: Always handle boards carefully. They can be
extremely sensitive to ESD. Hold boards only by their edges. After removing
a board from its protective wrapper or from the server, place the board
component side up on a grounded, static free surface. Use a conductive foam
pad if available but not the board wrapper. Do not slide board over any
surface.
Installing or removing jumpers: A jumper is a small plastic encased
conductor that slips over two jumper pins. Some jumpers have a small tab on
top that you can grip with your fingertips or with a pair of fine needle nosed
pliers. If your jumpers do not have such a tab, take care when using needle
nosed pliers to remove or install a jumper; grip the narrow sides of the
jumper with the pliers, never the wide sides. Gripping the wide sides can
damage the contacts inside the jumper, causing intermittent problems with
the function controlled by that jumper. Take care to grip with, but not
squeeze, the pliers or other tool you use to remove a jumper, or you may
bend or break the pins on the board.

Preface
Intel®Server System R1000SP Service Guide v
Preface
About this Manual
This manual is written for system technicians who are responsible for troubleshooting, upgrading,
and repairing this server system. This document provides a brief overview of the features of the
server board/chassis, a list of accessories or other components you may need, troubleshooting
information, and instructions on how to add and replace components on the Intel®Server System
R1000SP family products. For the latest revision of this manual, go to
http://www.intel.com/p/en_US/support/.
Manual Organization
Chapter 1 provides a brief overview of the Intel®Server System R1000SP family. In this chapter,
you will find a list of the server system features, and figures of the system and components to help
you identify your system components and their locations.
Chapter 2 provides instructions on adding and replacing components. Use this chapter for step-by-
step instructions and diagrams for installing or replacing components such as the fan, power supply,
and front panel board, among other components.
Chapter 3 provides instructions on using the utilities that are shipped with the board or that may be
required to update the system. This includes information for navigating through the BIOS Setup
screens, performing a BIOS update, and resetting the password or BIOS defaults.
The back of this manual provides technical specifications, regulatory information, LED Decoder,
"getting help" information, and Intel®Server Issue Report Form.
Additional Information and Software
For additional information about this family of products or any of their supported accessories, refer
to the following resources available at http://www.intel.com/p/en_US/support/.
Table 1. Server System References
For this information or software
Use this Document or Software
For in-depth technical information about this product
Intel®Server System R1000SP Product Family Technical Product
Specification
Intel®Server Board S1400SP Technical Product Specification
For a quick guide of how to assemble the server system
and install components
Intel®Server System R1000SP Product Family Quick Integration
Guide
For product list and supported Intel®spares and
accessories
Spares and Accessories List and Configuration Guide
For server configuration guidance and compatibility
Intel®Server Configurator tool
http://serverconfigurator.intel.com/sct_app.aspx
For system power budget guidance
Power Budget Tool
For system firmware updates and onboard device drivers
and software to manage your Intel®Server System.
Intel®Server Deployment & Management DVD
Product Safety and Regulatory document
Intel Server Products - Product Safety and Regulatory Compliance
Document

Table of Contents
vi Intel®Server System R1000SP Service Guide
Table of Contents
Safety Information.....................................................................................................................................iii
Preface..........................................................................................................................................................v
1Server System Features........................................................................................................................1
Server System Feature Overview...........................................................................................................2
Server System Components....................................................................................................................3
Hot Swap Hard Drive Bay and Front Panel Options..............................................................................4
Front Panel .............................................................................................................................................4
Back Panel..............................................................................................................................................5
Server Board Components......................................................................................................................6
Intel®Light-Guided Diagnostics...........................................................................................................7
System Recovery Jumpers......................................................................................................................8
Peripheral Devices..................................................................................................................................9
Hard Disk Drive Carriers........................................................................................................................9
Slimline Optical Drive Support..............................................................................................................9
Bezel ....................................................................................................................................................10
Hot-Swap SAS/SATA Backplane........................................................................................................10
4 x 3.5-inch Hard Drive Backplane............................................................................................10
8 x 2.5-inch Hard Drive Backplane............................................................................................11
Advanced Management Options ..........................................................................................................11
2Hardware Installations and Upgrades..............................................................................................12
Before You Begin.................................................................................................................................12
Tools and Supplies Needed ........................................................................................................12
System Reference.......................................................................................................................12
Cable Routing....................................................................................................................................... 12
For system with 4 x 3.5" fixed hard drive bay:...........................................................................13
For system with 4 x 3.5" hot swap hard drive bay: ....................................................................14
For system with 8 x 2.5" hard drive bay:.................................................................................... 15
Fan Connections...................................................................................................................................16
Removing and Installing the Front Bezel.............................................................................................17
Removing the Front Bezel..........................................................................................................17
Installing the Front Bezel............................................................................................................18
Removing and Installing the System Cover.........................................................................................18
Removing the System Cover......................................................................................................18
Installing the System Cover........................................................................................................19
Removing and Installing the Air Duct.................................................................................................. 20
Removing the Air Duct...............................................................................................................20
Installing the Air Duct................................................................................................................20
Removing and Installing Processor......................................................................................................21
Removing Processor Heatsink....................................................................................................21
Installing the Processor...............................................................................................................21
Installing Processor Heatsink .....................................................................................................23
Removing the Processor.............................................................................................................24
Installing and Removing Memory........................................................................................................24
Installing Memory ......................................................................................................................24
Removing Memory..................................................................................................................... 25

Table of Contents
Intel®Server System R1000SP Service Guide vii
Installing and Removing Hot-swap Hard Drive...................................................................................25
Installing a Hard Disk Drive into 3.5" Hard Drive Carrier.........................................................25
Installing a Hard Disk Drive into 2.5" Hard Drive Carrier.........................................................27
Removing and Installing the PCI Riser Assembly...............................................................................28
Removing the PCI Riser Assembly............................................................................................28
Installing the PCI Riser Assembly..............................................................................................29
Installing and Removing a PCI Add-in Card........................................................................................29
Installing a PCI Add-in Card......................................................................................................29
Removing a PCI Add-in Card.....................................................................................................30
Replacing a PCI Riser Card..................................................................................................................30
Removing a PCI Riser Card .......................................................................................................31
Installing a PCI Riser Card.........................................................................................................31
Installing and Removing a Slimline Optical Drive ..............................................................................31
Installing a Slimline Optical Drive.............................................................................................31
Removing a Slimline Optical Drive ...........................................................................................32
Installing and Removing Intel®I/O Expansion Module.......................................................................33
Installing Intel®I/O Expansion Module .....................................................................................33
Removing Intel®I/O Expansion Module.................................................................................... 33
Installing and Removing the Intel®RAID C600 Upgrade Key............................................................34
Installing the Intel®RAID C600 Upgrade Key..........................................................................34
Removing the Intel®RAID C600 Upgrade Key.........................................................................34
Installing and Removing the Intel®Remote Management Module 4...................................................34
Installing the Intel®RMM4 Lite.................................................................................................34
Install the Intel®RMM4 NIC .....................................................................................................35
Removing the Intel®RMM4 Lite...............................................................................................35
Removing the Intel®RMM4 NIC...............................................................................................35
Installing and Removing the Intel®RAID Smart Battery ....................................................................36
Installing the Intel®RAID Smart Battery................................................................................... 36
Removing the Intel®RAID Smart Battery .................................................................................37
Replacing the Fixed Power Supply ......................................................................................................37
Replacing the Redundant Power Supply..............................................................................................38
Installing and Removing the Server Board ..........................................................................................39
Removing the Server Board........................................................................................................39
Installing the Server Board.........................................................................................................40
Replacing the Backup Battery..............................................................................................................41
Replacing a System Fan.......................................................................................................................42
Replacing the Backplane......................................................................................................................43
Removing the Backplane............................................................................................................43
Installing the Backplane .............................................................................................................43
Installing and Removing the Rack Handles .........................................................................................44
Installing the Rack Handles........................................................................................................44
Removing the Rack Handles ......................................................................................................44
3Server Utilities ....................................................................................................................................45
Using the BIOS Setup Utility...............................................................................................................45
Entering BIOS Setup..................................................................................................................45
If You Cannot Access Setup.......................................................................................................45
Setup Menus............................................................................................................................... 45
Upgrading the BIOS...................................................................................................................46
Clearing the Password................................................................................................................47
Restoring the BIOS Defaults......................................................................................................47

Table of Contents
viii Intel®Server System R1000SP Service Guide
Appendix A: Technical Reference...........................................................................................................48
Power Supply Input Voltages.....................................................................................................48
Power Supply Output Voltages ..................................................................................................48
System Environmental Specifications........................................................................................48
Appendix B: Regulatory and Compliance Information........................................................................50
Appendix C: Getting Help........................................................................................................................51
Warranty Information.................................................................................................................51
Appendix D: Intel®Server Issue Report Form ......................................................................................52

List of Figures
Intel®Server System R1000SP Service Guide ix
List of Figures
Figure 1. Intel®Server System R1000SP......................................................................................................1
Figure 2. Intel®Server System R1000SP Components ................................................................................3
Figure 3. 3.5" Fixed Hard Drive Bay - 4 Drive Configuration.....................................................................4
Figure 4. 3.5" Hot Swap Hard Drive Bay - 4 Drive Configuration .............................................................. 4
Figure 5. 2.5" Hard Drive Bay - 8 Drive Configuration...............................................................................4
Figure 6. Front Panel Options.......................................................................................................................4
Figure 7. Back Panel Feature Identification..................................................................................................5
Figure 8. Server Board Connector and Component Locations .....................................................................6
Figure 9. Intel®Light-Guided Diagnostic LEDs - Server Board..................................................................7
Figure 10. Configuration Jumpers ................................................................................................................8
Figure 11. Optional Peripherals (8x2.5-inch hard drive bays as shown)......................................................9
Figure 12. Front view of Front Bezel..........................................................................................................10
Figure 13. 4 x 3.5-inch Hard Drive Backplane Components (Front View)................................................10
Figure 14. 4 x 3.5-inch Hard Drive Backplane Components (Rear View).................................................10
Figure 15. 8 x 2.5-inch Hard Drive Backplane Components (Front View)................................................11
Figure 16. 8 x 2.5-inch Hard Drive Backplane Components (Rear View).................................................11
Figure 17. Cable Routing –4 x 3.5" Fixed HDD........................................................................................13
Figure 18. Cable Routing –4 x 3.5" Hot Swap HDD.................................................................................14
Figure 19. Cable Routing –8 x 2.5" HDD..................................................................................................15
Figure 20. Fixed System Fan Order............................................................................................................ 16
Figure 21. Redundant System Fan Order....................................................................................................16
Figure 22. Connecting the Fan Power Cables to the Mother Board ...........................................................17
Figure 23. Removing the Front Bezel.........................................................................................................18
Figure 24. Installing the Front Bezel ..........................................................................................................18
Figure 25. Removing the System Cover..................................................................................................... 19
Figure 26. Installing the System Cover.......................................................................................................19
Figure 27. Removing the Air Duct..............................................................................................................20
Figure 28. Installing the Air Duct...............................................................................................................20
Figure 29. Removing Processor Heatsink...................................................................................................21
Figure 30. Installing Processor –Open the Socket Lever........................................................................... 22
Figure 31. Installing Processor –Open the Load Plate............................................................................... 22
Figure 32. Installing Processor –Install the Processor...............................................................................22
Figure 33. Installing Processor –Remove the Cover..................................................................................23
Figure 34. Installing Processor –Close the Load Plate ..............................................................................23
Figure 35. Installing Processor –Latch the Locking Lever........................................................................23
Figure 36. Installing Processor Heatsink ....................................................................................................24
Figure 37. Installing Memory .....................................................................................................................25
Figure 38. Installing Hard Disk Drive –Removing 3.5" HDD carrier.......................................................25
Figure 39. Installing Hard Disk Drive –Removing 3.5" HDD interface bracket.......................................26
Figure 40. Installing Hard Disk Drive –Installing 3.5" HDD....................................................................26
Figure 41. Installing Hard Disk Drive –Installing 2.5" HDD....................................................................26
Figure 42. Installing Hard Disk Drive –Inserting 3.5" HDD assembly ..................................................... 27
Figure 43. Installing Hard Disk Drive –Removing 2.5" HDD carrier.......................................................27
Figure 44. Installing Hard Disk Drive –Removing plastic drive blank .....................................................27
Figure 45. Installing Hard Disk Drive –Installing 2.5" HDD....................................................................28
Figure 46. Installing Hard Disk Drive –Inserting 2.5" HDD assembly ..................................................... 28
Figure 47. Removing PCI Riser Assembly.................................................................................................28

List of Figures
x Intel®Server System R1000SP Service Guide
Figure 48. Installing PCI Riser Assembly ..................................................................................................29
Figure 49. Installing a PCI Add-In Card.....................................................................................................30
Figure 50. Removing a PCI Add-In Card................................................................................................... 30
Figure 51. Removing the PCI Riser Card................................................................................................... 31
Figure 52. Installing the PCI Riser Card.....................................................................................................31
Figure 53. Installing the Plastic Guide to the Optical Drive.......................................................................32
Figure 54. Installing an Optical Drive ........................................................................................................32
Figure 55. Removing the Slimline Optical Drive .......................................................................................32
Figure 56. Installing Intel®I/O Expansion Module....................................................................................33
Figure 57. Removing an I/O Expansion Module........................................................................................ 33
Figure 58. Installing the Intel®RAID C600 Upgrade Key.........................................................................34
Figure 59. Installing the Intel®RMM4 Lite................................................................................................35
Figure 60. Installing the Intel®RMM4 NIC ...............................................................................................35
Figure 61. Removing the Intel®RMM4 NIC..............................................................................................36
Figure 62. Installing the Intel®RAID Smart Battery..................................................................................36
Figure 63. Removing the Intel®RAID Smart Battery ................................................................................ 37
Figure 64. Removing the fixed power supply module................................................................................ 37
Figure 65. Installing the fixed power supply module .................................................................................38
Figure 66. Removing the redundant power supply module........................................................................38
Figure 67. Installing the redundant power supply module..........................................................................39
Figure 68. Removing the Air Duct..............................................................................................................39
Figure 69. Removing the Server Board ......................................................................................................40
Figure 70. Installing the Server Board........................................................................................................ 40
Figure 71. Installing the Air Duct...............................................................................................................41
Figure 72. Replacing the Backup Battery................................................................................................... 42
Figure 73. Replacing a system fan.............................................................................................................. 42
Figure 74. Removing the backplane ...........................................................................................................43
Figure 75. Installing the backplane............................................................................................................. 44
Figure 76. Installing the Rack Handle ........................................................................................................44
Figure 77. Removing the Rack Handle.......................................................................................................44

List of Tables
Intel®Server System R1000SP Service Guide xi
List of Tables
Table 1. Server System References...............................................................................................................v
Table 2. Intel®Server System R1000SP Feature Summary..........................................................................2
Table 3. BIOS Setup: Keyboard Command Bar.........................................................................................45
Table 4. Power Supply Output Capability.................................................................................................. 48
Table 5. System Environmental Limits Summary......................................................................................48

Server System Features
Intel®Server System R1000SP Service Guide 1
1 Server System Features
This chapter briefly describes the main features of the Intel®Server System R1000SP family.
This includes illustrations of the products, a list of the server system features, and diagrams
showing the location of important components and connections on the server systems.
Figure 1. Intel®Server System R1000SP

Server System Features
2 Intel®Server System R1000SP Service Guide
Server System Feature Overview
The following table summarizes the features of the server systems:
Table 2. Intel®Server System R1000SP Feature Summary
Server System
Integrated Server Board
Intel®Server System R1000SP product family
Intel®Server Board S1400SP
Feature
Description
Processor Support
Support for one Intel®Xeon®processor E5-2400 processor in an FC-LGA 1356 Socket B2 package
with Thermal Design Power up to 95W
Memory
Three memory channels, six memory DIMMs (Two memory DIMMs per channel)
Support for 1066/1333 MT/s Unbuffered (UDIMM) LVDDR3 or DDR3 memory
Support for 1066/1333/1600 MT/s ECC Registered (RDIMM) DDR3 memory
Support for 1066/1333 MT/s ECC Registered (RDIMM) LVDDR3 memory
No support for mixing of RDIMMs and UDIMMs
No support for LRDIMMs
No support for Quad Rank DIMMs
Chipset
Intel®C602 (-A) chipset with support for storage option upgrade keys
External I/O
connections
Video (back and front video connectors)
RJ-45 Serial-A Port
Two RJ-45 Network Interface Connectors supporting 10/100/1000Mb for system with S1400SP2,
four RJ-45 Network Interface Connectors supporting 10/100/1000Mb for system with S1400SP4
USB 2.0 connectors - 4 on back panel + 2 on front panel
Internal I/O
connectors/headers
One Type-A USB 2.0 connector
One internal 2x5 pin serial port B header1
I/O Module
Accessory Options
The following I/O modules utilize a single proprietary on-board connector. An installed I/O module
can be supported in addition to standard on-board features and any add-in expansion cards.
Quad port 1 GbE based on Intel®Ethernet Controller I350 –AXX4P1GBPWLIOM
Dual RJ-45 port 10GBase-T I/O Module based on Intel®Ethernet Controller x540 –
AXX10GBTWLIOM
Dual SFP+ port 10GbE module based on Intel®82599 10 GbE controller –AXX10GBNIAIOM
Single Port FDR 56GT/S speed Infiniband* module with QSFP connector –AXX1FDRIBIOM
Dual port FDR 56GT/S speed Infiniband* module with QSFP connector –AXX2FDRIBIOM
System Fan Options
Fixed system fan option:
Four 40mmx28mm single-rotor fans
Redundant system fan option:
Five 40mmx56mm dual-rotor fans
Riser Cards Options
Support for one 1U PCI Express* riser card:
Single add-in card slot –PCI Express* Gen3 x8 electrical with x16 physical
Video
Integrated 2D Video Controller
16 MB DDR3 Memory
On-board storage
controllers and options
Two AHCI SATA connectors at 6Gbps
One AHCI 4-port mini-SAS connector, supporting four SATA ports at 3Gbps
Two SCU 4-port mini-SAS connectors, supporting up to eight SAS/SATA ports total at 3Gbps with
optional Intel®C600 RAID Upgrade Keys
One eUSB 2x5 pin connector to support 2mm low-profile eUSB solid state devices

Server System Features
Intel®Server System R1000SP Service Guide 3
Note: Internal 2x5 pin serial port B header does not function in systems configured with AC 450W Gold
power supply.
Server System Components
This section helps you identify the components of your server system. If you are near the system, you can
also use the Quick Reference Label provided on the inside of the chassis cover to assist in identifying
components.
Figure 2. Intel®Server System R1000SP Components
Feature
Description
Security
Intel®Trusted Platform Module (TPM) - AXXTPME5 (Accessory Option)
Server Management
Integrated Baseboard Management Controller, IPMI 2.0 compliant
Support for Intel®Server Management Software
Intel®Remote Management Module 4 Lite –Accessory option
Intel®Remote Management Module 4 Management NIC –Accessory option
Power Supply Options
Fixed power supply option:
AC 350W Silver
Redundant power supply option:
AC 450W Gold
Storage Bay Options
4x 3.5” SATA fixed hard drive bays + Optical Drive support
4x 3.5” SATA/SAS hot swap hard drive bays + Optical Drive support
8x 2.5” SATA/SAS hot swap hard drive bays
Supported Rack Mount
Kit Accessory Options
Value rack mount rail kit –Intel Product Code –AXXVRAIL
Tool-less rack mount rail kit –Intel Product Code –AXXPRAIL
Cable Management Arm –Intel Product Code –AXX1U2UCMA (*supported with AXXPRAIL
only)
2-post fixed mount bracket kit –Intel Product Code –AXX2POSTBRCKT

Server System Features
4 Intel®Server System R1000SP Service Guide
Hot Swap Hard Drive Bay and Front Panel Options
Figure 3. 3.5" Fixed Hard Drive Bay - 4 Drive Configuration
Figure 4. 3.5" Hot Swap Hard Drive Bay - 4 Drive Configuration
Figure 5. 2.5" Hard Drive Bay - 8 Drive Configuration
Front Panel
Label
Description
Label
Description
A
System ID Button w/Integrated LED
F
System Status LED
B
NMI Button (recessed, tool required for use)
G
Power Button w/Integrated LED
C
NIC-1 Activity LED
H
Hard Drive Activity LED
D
NIC-3 Activity LED
I
NIC-4 Activity LED
E
System Cold Reset Button
J
NIC-2 Activity LED
Figure 6. Front Panel Options

Server System Features
Intel®Server System R1000SP Service Guide 5
Back Panel
Figure 7. Back Panel Feature Identification

Server System Features
6 Intel®Server System R1000SP Service Guide
Server Board Components
This section helps you identify the components and connectors on the server board.
Figure 8. Server Board Connector and Component Locations

Server System Features
Intel®Server System R1000SP Service Guide 7
Intel®Light-Guided Diagnostics
Figure 9. Intel®Light-Guided Diagnostic LEDs - Server Board
The server system contains the following diagnostic LEDs, each providing the following functions:
1. The System Identification LED on the front and back panel helps identify the server from among
several servers. The ID LED is off by default, and blue when activated by button or software.
2. The System Status LED on the front and back panels shows the overall health of the system
(green, blinking green, blinking amber, amber, off).
3. POST Code Diagnostic LEDs on the server board change color or state (off, green, red, and
amber) according to the POST sequence.
4. System power good LED on the server board is illuminated when system power is good.
5. The 12V-STBY LED on the server board is illuminated (green) when power is applied.
6. Fan Fault LEDs help identify failed and failing fans. The fan fault LEDs turn on (amber) if there
is a fan fault.

Server System Features
8 Intel®Server System R1000SP Service Guide
7. DIMM Fault LEDs on the server board help identify failed and failing DIMM slots. The DIMM
fault LEDs turn on (amber) if there is a DIMM fault.
System Recovery Jumpers
Jumper Name
Jumper Purpose
BMC Force Update
If pins 2-3 are selected, the Integrated BMC Force Update Mode is
enabled. These pins should be selected on 1-2 for normal system
operation.
BIOS Recover
If pins 2-3 are selected, the system can only boot from EFI-bootable
recovery media with the recovery BIOS image. The main system
BIOS will not boot. These pins should be selected on 1-2 for normal
system operation.
Password Clear
If pins 2-3 are selected, administrator and user passwords are cleared
within five to ten seconds after the system is powered on. These pins
should be selected on 1-2 for normal system operation.
ME Force Update
If pins 2-3 are selected, the ME Force Update Mode is enabled.
These pins should be selected on 1-2 for normal system operation.
BIOS Default
If pins 2-3 are selected, the BIOS settings are cleared on the next
reset. These pins should be selected on 1-2 for normal system
operation.
Figure 10. Configuration Jumpers

Server System Features
Intel®Server System R1000SP Service Guide 9
Peripheral Devices
The Intel®Server System R1000SP provides locations and hardware for installing hard drives, CD-ROM
drive, or DVD-ROM drive. The following figure shows the available options:
A
System Label Pull-out
B
Slimline Optical Drive Bay
C
Video Port
D
USB Ports
E
Front Control Panel
F
Hard Disk Drive Bays
Figure 11. Optional Peripherals (8x2.5-inch hard drive bays as shown)
Hard Disk Drive Carriers
The Intel®Server System R1000SP ships with either 3.5-inch or 2.5 inch hard disk drive carrier, and with
different maximum number of hard disk drives.
Note: SAS drives are only supported when proper Intel®RAID C600 Upgrade Key or Intel®Integrated
RAID Module is installed.
For instructions on installing hard drives, see “Installing a Hot-swap Hard Disk Drive”.
Note:
1. Drives can consume up to 17 watts of power each. Drives must be specified to run at a
maximum ambient temperature of 45°C.
2. The Intel®Server System R1000SP does not support all SAS or Serial ATA (SATA) hard drives.
For a web link to a list of supported hard drives, see “Additional Information and Software”.
Slimline Optical Drive Support
The system has support for a single optical drive. The optical drive is NOT hot-swappable. The system
power must be turned off to insert or remove the slimline optical drive. For instructions on installing an
optical drive, see “Installing or Removing a Slimline Optical Drive”.
Intel®makes the following optical drive accessory kits available for this server system:
• Slimline DVD-ROM Drive: AXXSATADVDROM
• Slimline DVD-RW Drive: AXXSATADVDRWROM