Intel SR1625UR - Server System - 0 MB RAM User manual

Intel®Server System SR1625UR
Service Guide
A Guide for Technically Qualified Assemblers of Intel®Identified Subassemblies/
Products
Intel Order Number E52881-005

ii Intel®Server System SR1625UR Service Guide
Disclaimer
Information in this document is provided in connection with Intel®products. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any
express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining
applications or for any other application in which the failure of the Intel product could create a situation where
personal injury or death may occur. Intel may make changes to specifications and product descriptions at any time,
without notice.
Intel server boards contain a number of high-density VLSI and power delivery components that need adequate
airflow for cooling. Intel's own chassis are designed and tested to meet the intended thermal requirements of these
components when the fully integrated system is used together. It is the responsibility of the system integrator that
chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to
determine the amount of airflow required for their specific application and environmental conditions. Intel Corporation
can not be held responsible if components fail or the server board does not operate correctly when used outside any
of their published operating or non-operating limits.
Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in
the United States and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2008-2011, Intel Corporation. All Rights Reserved

Intel®Server System SR1625UR Service Guide iii
Preface
About this Manual
Thank you for purchasing and using the Intel® Server System SR1625UR.
This manual is written for system technicians who are responsible for troubleshooting,
upgrading, and repairing this server system. This document provides reference
information, feature information, and step by step instructions on how to add and replace
components on the server system. For the latest version of this manual, see
http://www.intel.com/p/en_US/support/highlights/server/s5520ur.
Manual Organization
Chapter 1 provides information on the contents of each server system and a list of
reference resources. This includes a list of technical documents that provide additional
details on the Intel® Server System SR1625UR, and the location where they can be found.
Chapter 2 provides a brief overview of the server system. This includes a list of the server
system features, illustrations of the product, and product diagrams to help you identify
components and their locations.
Chapter 3 provides instructions on adding and replacing components. It provides step-by-
step instructions and diagrams for installing or replacing components such as the fans,
power supply, drives, and other components.
Chapter 4 provides instructions on using the utilities that are shipped with the board or
that may be required to update the system. This includes information for navigating
through the BIOS Setup screens, performing a BIOS update, and resetting the password or
BIOS defaults.
The back of this manual provides technical specifications, regulatory information,
“getting help” information, and the warranty.

iv Intel®Server System SR1625UR Service Guide

Intel®Server System SR1625UR Service Guide v
Safety Information
Important Safety Instructions
Read all caution and safety statements in this document before performing any of the
instructions. See also Intel Server Boards and Server Chassis Safety Information on the
Intel®Server Deployment Toolkit 3.0 CD and/or at
http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.
Wichtige Sicherheitshinweise
Lesen Sie zunächst sämtliche Warn- und Sicherheitshinweise in diesem Dokument, bevor
Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu
Intel-Serverplatinen und Servergehäusen auf der Intel®Server Deployment Toolkit 3.0 CD
oder unter http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.
Consignes de sécurité
Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce
document avant de suivre toute instruction. Consultez Intel Server Boards and Server
Chassis Safety Information sur le Intel®Server Deployment Toolkit 3.0 CD ou bien
rendez-vous sur le site
http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.
Instrucciones de seguridad importantes
Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar
cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety
Information en el Intel®Server Deployment Toolkit 3.0 CD y/o en
http://www.intel.com/support/motherboards/server/sb/cs-010770.htm.

vi Intel®Server System SR1625UR Service Guide
重要安全指导

Intel®Server System SR1625UR Service Guide vii
Warnings
Heed safety instructions: Before working with your server product, whether you are
using this guide or any other resource as a reference, pay close attention to the safety
instructions. You must adhere to the assembly instructions in this guide to ensure and
maintain compliance with existing product certifications and approvals. Use only the
described, regulated components specified in this guide. Use of other products/
components will void the UL listing and other regulatory approvals of the product and
will most likely result in noncompliance with product regulations in the region(s) in which
the product is sold.
System power on/off: The power button DOES NOT turn off the system AC power. To
remove power from system, you must unplug the AC power cord from the wall outlet.
Make sure the AC power cord is unplugged before you open the chassis, add, or remove
any components.
Hazardous conditions, devices and cables: Hazardous electrical conditions may be
present on power, telephone, and communication cables. Turn off the server and
disconnect the power cord, telecommunications systems, networks, and modems attached
to the server before opening it. Otherwise, personal injury or equipment damage can
result.
Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives,
boards, and other parts. We recommend that you perform all procedures in this chapter
only at an ESD workstation. If one is not available, provide some ESD protection by
wearing an antistatic wrist strap attached to chassis ground any unpainted metal surface on
your server when handling parts.
ESD and handling boards: Always handle boards carefully. They can be extremely
sensitive to ESD. Hold boards only by their edges. After removing a board from its
protective wrapper or from the server, place the board component side up on a grounded,
static free surface. Use a conductive foam pad if available but not the board wrapper. Do
not slide board over any surface.
Installing or removing jumpers: A jumper is a small plastic encased conductor that slips
over two jumper pins. Some jumpers have a small tab on top that you can grip with your
fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a tab,
take care when using needle nosed pliers to remove or install a jumper; grip the narrow
sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can
damage the contacts inside the jumper, causing intermittent problems with the function
controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool
you use to remove a jumper, or you may bend or break the pins on the board.

viii Intel®Server System SR1625UR Service Guide

Intel®Server System SR1625UR Service Guide ix
Table of Contents
Preface ........................................................................................................................iii
About this Manual ................................................................................................................. iii
Manual Organization ............................................................................................................. iii
Safety Information ......................................................................................................v
Important Safety Instructions .................................................................................................v
Wichtige Sicherheitshinweise ................................................................................................v
Consignes de sécurité ...........................................................................................................v
Instrucciones de seguridad importantes ................................................................................v
Warnings .............................................................................................................................. vii
Chapter 1: Server System Contents and References .............................................1
Server System Contents ........................................................................................................1
Intel®Server System SR1625UR Contents ..................................................................1
Intel®Server System SR1625URSAS Contents ...........................................................2
Additional Information and Software ......................................................................................3
Chapter 2: Server System Features ..........................................................................5
Server System Feature Overview ..........................................................................................6
Server System Components ..................................................................................................9
Intel®Light-Guided Diagnostics ..................................................................................10
Server Board Components ..................................................................................................14
Configuration Jumpers ................................................................................................16
Front of Server System ........................................................................................................18
Peripheral Devices ......................................................................................................18
Control Panel ...............................................................................................................19
Bezels ..........................................................................................................................23
Rear of Server System ........................................................................................................24
Back Panel Connectors ...............................................................................................25
SAS/SATA Midplanes ..........................................................................................................27
Passive Midplane ........................................................................................................27
Active Midplane ...........................................................................................................28
Hot-swap SAS/SATA Backplane .........................................................................................29
RAID Support .......................................................................................................................30
Advanced Management Options .........................................................................................30
Intel® Remote Management Module 3 ........................................................................30
Rack Mount Options ............................................................................................................31
Chapter 3: Hardware Installations and Upgrades .................................................33
Before You Begin .................................................................................................................33
Tools and Supplies Needed ........................................................................................33

xIntel®Server System SR1625UR Service Guide
System References .....................................................................................................33
Cable Routing ...................................................................................................................... 34
Removing and Installing from a Rack .................................................................................. 35
Fixed Bracket Rack Mount Removal ........................................................................... 36
Fixed Bracket Rack Mount Installation ........................................................................ 36
Basic Rail Rack Mount Removal .................................................................................37
Basic Rail Rack Mount Installation ..............................................................................37
Tool-less Rail Rack Mount Servicing ..........................................................................38
Removing and Installing the Front Bezel ............................................................................. 38
Removing the Front Bezel ........................................................................................... 39
Installing the Front Bezel ............................................................................................. 40
Removing and Installing the System Cover ........................................................................41
Removing the Server System Cover ........................................................................... 41
Installing the Server System Cover ............................................................................. 42
Removing and Installing the PCI Riser Assembly ............................................................... 43
Removing the PCI Riser Assembly ............................................................................. 43
Installing the PCI Riser Assembly ............................................................................... 44
Replacing the PCI Riser Card .............................................................................................45
Removing the PCI Express* Riser Card .....................................................................45
Installing the Replacement PCI Express* Riser Card ................................................. 46
Installing and Removing a PCI Add-in Card ........................................................................46
Installing a PCI Add-in Card ........................................................................................ 46
Removing a PCI Add-in Card ...................................................................................... 47
Removing and Installing the Processor Air Duct .................................................................48
Removing the Processor Air Duct ...............................................................................48
Installing the Processor Air Duct .................................................................................49
Installing and Removing Memory ........................................................................................50
Installing DIMMs ..........................................................................................................50
Removing DIMMs ........................................................................................................52
Installing and Removing the Processor ...............................................................................52
Installing the Processor ...............................................................................................52
Installing the Heatsink .................................................................................................55
Removing the Heatsink ...............................................................................................57
Removing the Processor .............................................................................................58
Installing and Removing a Hot-swap Hard Drive ................................................................. 59
Installing a Hot-swap SAS/SATA Hard Disk Drive ...................................................... 59
Removing a Hot-swap SAS/SATA Hard Disk Drive .................................................... 61
Installing and Removing a Slimline Optical Drive ................................................................62
Installing a Slimline Optical Drive ................................................................................ 62
Removing a Slimline Optical Drive .............................................................................. 63
Installing and Removing the I/O Expansion Module ............................................................ 64
Installing the I/O Expansion Module ............................................................................64
Removing the I/O Expansion Module(s) .....................................................................65
Installing and Removing the Intel®Remote Management Module 3 ...................................66