Intel SR9000MK4U - Server System - 0 MB RAM User manual

Intel®Server System
SR9000MK4U Product Guide
Intel Order Number D71314-004

ii Intel®Server System SR9000MK4U Product Guide
Disclaimer
Information in this document is provided in connection with Intel® products. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any
express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining
applications or for any other application in which the failure of the Intel product could create a situation where
personal injury or death may occur. Intel may make changes to specifications and product descriptions at any time,
without notice.
Intel server boards contain a number of high-density VLSI and power delivery components that need adequate
airflow for cooling. Intel's own chassis are designed and tested to meet the intended thermal requirements of these
components when the fully integrated system is used together. It is the responsibility of the system integrator that
chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to
determine the amount of airflow required for their specific application and environmental conditions. Intel Corporation
can not be held responsible if components fail or the server board does not operate correctly when used outside any
of their published operating or non-operating limits.
Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in
the United States and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2006-2007, Intel Corporation. All Rights Reserved

iii
Safety Information
Important Safety Instructions
Read all caution and safety statements in this document before performing any of the
instructions. See also Intel Server Boards and Server Chassis Safety Information on the
Resource CD and/or at http://support.intel.com/support/motherboards/server/sb/cs-
010770.htm.
Wichtige Sicherheitshinweise
Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor
Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu
Intel-Serverplatinen und Servergehäusen auf der Resource CD oder unter http://
support.intel.com/support/motherboards/server/sb/cs-010770.htm.
Consignes de sécurité
Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce
document avant de suivre toute instruction. Consultez Intel Server Boards and Server
Chassis Safety Information sur le Resource CD ou bien rendez-vous sur le site http://
support.intel.com/support/motherboards/server/sb/cs-010770.htm.
Instrucciones de seguridad importantes
Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar
cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety
Information en el Resource CD y/o en http://support.intel.com/support/motherboards/
server/sb/cs-010770.htm.

iv Intel®Server System SR9000MK4U Product Guide
Warnings
Heed safety instructions: Before working with your server product, whether you are
using this guide or any other resource as a reference, pay close attention to the safety
instructions. You must adhere to the assembly instructions in this guide to ensure and
maintain compliance with existing product certifications and approvals. Use only the
described, regulated components specified in this guide. Use of other products /
components will void the UL listing and other regulatory approvals of the product and
will most likely result in noncompliance with product regulations in the region(s) in which
the product is sold.
System power on/off: The power button DOES NOT turn off the system AC power. To
remove power from system, you must unplug the AC power cord from the wall outlet.
Make sure the AC power cord is unplugged before you open the chassis, add, or remove
any components.
Hazardous conditions, devices and cables: Hazardous electrical conditions may be
present on power, telephone, and communication cables. Turn off the server and
disconnect the power cord, telecommunications systems, networks, and modems attached
to the server before opening it. Otherwise, personal injury or equipment damage can
result.
Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives,
boards, and other parts. We recommend that you perform all procedures in this chapter
only at an ESD workstation. If one is not available, provide some ESD protection by
wearing an antistatic wrist strap attached to chassis ground any unpainted metal surface on
your server when handling parts.
ESD and handling boards: Always handle boards carefully. They can be extremely
sensitive to ESD. Hold boards only by their edges. After removing a board from its
protective wrapper or from the server, place the board component side up on a grounded,
static free surface. Use a conductive foam pad if available but not the board wrapper. Do
not slide board over any surface.
重要安全指导

Intel®Server System SR9000MK4U Product Guide v
Installing or removing jumpers: A jumper is a small plastic encased conductor that slips
over two jumper pins. Some jumpers have a small tab on top that you can grip with your
fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a tab,
take care when using needle nosed pliers to remove or install a jumper; grip the narrow
sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can
damage the contacts inside the jumper, causing intermittent problems with the function
controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool
you use to remove a jumper, or you may bend or break the pins on the board.

vi Intel®Server System SR9000MK4U Product Guide

vii
Preface
About this Manual
Thank you for purchasing and using Intel®server products.
This manual is written for system technicians who are responsible for troubleshooting,
upgrading, and managing the Intel® Server System SR9000MK4U. This document
provides an overview of the features of the server system utilities, and instructions on how
to install, setup, and manage the system. For the latest version of this manual, see http://
support.intel.com/support/motherboards/server/SR9000MK4U/.
Manual Organization
Chapter 1 provides a brief overview of the chassis features for the Server System
SR9000MK4U.
Chapter 2 provides an overview of the features of the boards used in the Server System
SR9000MK4U.
In this chapter, you will find a list of the server board features, photos of the product, and
product diagrams to help you identify components and their locations.
Chapter 3 provides instructions for adding and replacing components. Use this chapter for
step-by-step instructions and diagrams for installing or replacing components such as the
hard drives, memory, processor, fans, boards and other components.
Chapter 4 tells you how to install the system into a rack environment.
Chapter 5 provides instructions on using the utilities that are shipped with the board or
that may be required to update the system. This includes how to navigate through the
BIOS Setup screens, and how to clear the CMOS.
Chapter 6 provides troubleshooting information. In this chapter, you will find suggestions
and steps to follow for performing troubleshooting activities to identify the source of a
problem.
Appendices provide tables of POST codes, SEL codes, safety information, safety start-up
warnings, and how to get help.

viii Intel®Server System SR9000MK4U Product Guide
Product Accessories
You may need or want to purchase one or more of the following accessory items for your
server:
Processor, memory DIMMs, hard drive, USB floppy drive, CD-ROM or DVD-ROM
drive, RAID controller, operating system.
For information about which accessories, memory, processors, and third-party hardware
have been tested and can be used with your board, and for ordering information for Intel
products, see http://support.intel.com/support/motherboards/server/SR9000MK4U/
compat.htm.
Additional Information and Software
If you need more information about this product or information about the accessories that
can be used with this server board, use the following resources. These files are available at
http://support.intel.com/support/motherboards/server/SR9000MK4U/
Unless otherwise indicated in the table below, once on this Web page, type the document
or software name in the search field at the left side of the screen and select the option to
search “This Product.”
Table 1. Additional Information and Software
For this information or
software Use this Document or Software
For in-depth technical
information about this
product, including BIOS
settings and chipset
information
Intel® Server System SR9000MK4U Technical Product
Specification
If you just received this
product and need to
install it
Intel® Server System SR9000MK4U Quick Start User's Guide in the
product box
Accessories or other Intel
server products Spares and Configuration Guide
Hardware (peripheral
boards, adapter cards)
and operating systems
that have been tested with
this product
Tested Hardware Operating Systems List
Processors that have
been tested with this
product
Supported Processors

Intel®Server System SR9000MK4U Product Guide ix
See also the Resource CD that came with your server system.
DIMMs that have been
tested with this product Tested Memory List
For drivers Driver (for an extensive list of available drivers)
Operating System Driver (for operating system drivers)
For firmware and BIOS
updates, or for BIOS
recovery
Firmware Updates
For diagnostics test
software Diagnostics
Table 1. Additional Information and Software
For this information or
software Use this Document or Software

x Intel®Server System SR9000MK4U Product Guide
Powering the System On and Off
Powering On the System Power
1. Connect the power cables to AC input power connectors in the back of the system
and to the outlet. If 100 - 110 VAC is used, both power supplies must be connected.
2. If peripheral devices are attached that need to be turned on first, power on these
peripherals. See your peripheral guides for information.
3. Press the power button on the front panel. The green power LED will light.
4. Watch the fault LED on the front panel for any signs of trouble. See the
troubleshooting information at the end of this manual for help if necessary.
Powering Off the System Power
1. If peripheral devices are attached that need to be turned off first, power off these
peripherals. See your peripheral guides for information.
2. Press the power button on the front panel. The green power LED will turn off.
Note: The system will force a power off if the power button is held down for four or more
seconds. This method should be used only if the system has locked up. If the power is
forced off, wake events, such as Wake-on-LAN, are disabled. The IPMI “Power Off”
command functions the same way as a four-second button press. When the system power is
forced off, either the power button or the IPMI “Power On” command must be used to
power the system back on.