Intel R2000WF series Configuration guide

Intel® Server Products and Solutions
Intel® Server System R2000WF
Product Family
Technical Product Specification
An overview of product features, functions, architecture, and support specifications
Revision 1.2
November 2017

<Blank page>

Intel® Server System R2000WF Product Family Technical Product Specification
3
Document Revision History
Date
Revision
Modifications
July 2017
1.0
Production Release
September
1.1
Updated all tables from Appendix B and Appendix C
Updated S2600WF Architecture Block Diagram
Added QAT information:
Server Board Product Family Feature Set
S2600WFQ Architecture Block Diagram
Edited bullet on the section 4.1.1 Memory Slot Population Requirements
Added subsection 3.3.8 DC Output Specification
November 2017
1.2
Updated Trusted Platform Module (China version) iPC AXXTPMCHNE8 on table Intel® Server
Board S2600WF product family feature set
Added TPM definition on Glossary section
Added Retimer accessory to the sections: 6.5, 7.4 and 7.4.4

Intel® Server System R2000WF Product Family Technical Product Specification
4
Disclaimers
Intel technologies’ features and benefits depend on system configuration and may require enabled
hardware, software, or service activation. Learn more at Intel.com, or from the OEM or retailer.
You may not use or facilitate the use of this document in connection with any infringement or other legal
analysis concerning Intel products described herein. You agree to grant Intel a non-exclusive, royalty-free
license to any patent claim thereafter drafted which includes subject matter disclosed herein.
No license (express or implied, by estoppel or otherwise) to any intellectual property rights is granted by this
document.
The products described may contain design defects or errors known as errata which may cause the product
to deviate from published specifications. Current characterized errata are available on request.
Intel disclaims all express and implied warranties, including without limitation, the implied warranties of
merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from
course of performance, course of dealing, or usage in trade.
Copies of documents which have an order number and are referenced in this document may be obtained by
calling 1-800-548-4725 or by visiting www.intel.com/design/literature.htm.
Intel, the Intel logo, and Xeon are trademarks of Intel Corporation or its subsidiaries in the U.S. and/or other
countries.
*Other names and brands may be claimed as the property of others.
Copyright © Intel Corporation. All rights reserved.

Intel® Server System R2000WF Product Family Technical Product Specification
5
Table of Contents
1. Introduction............................................................................................................................................................... 15
1.1 Document Outline..........................................................................................................................................................16
1.2 Intel® Server Board Use Disclaimer.........................................................................................................................16
1.3 Product Errata..................................................................................................................................................................16
2. Server System Family Overview............................................................................................................................ 17
2.1 System Features Overview.........................................................................................................................................21
2.2 Server Board Architecture..........................................................................................................................................22
2.3 Server Board Features Overview .............................................................................................................................24
2.4 Back Panel Features......................................................................................................................................................27
2.5 Front Control Panel Options .....................................................................................................................................27
2.6 Front Drive Bay Options..............................................................................................................................................28
2.7 Locking Front Bezel Support..................................................................................................................................... 29
2.8 System Dimensional Data........................................................................................................................................... 30
2.8.1 Chassis Dimensions, 2.5” Drive Bay........................................................................................................................ 30
2.8.2 Label Emboss Dimensions .........................................................................................................................................31
2.8.3 Pull-Out Tab Label Emboss Dimensions..............................................................................................................32
2.9 System Cable Routing Channels.............................................................................................................................. 33
2.10 Available Rack and Cabinet Mounting Kit Options ..........................................................................................34
2.11 System Level Environmental Limits .......................................................................................................................35
2.12 System Packaging..........................................................................................................................................................36
3. System Power............................................................................................................................................................ 37
3.1 Power Supply Configurations ...................................................................................................................................37
3.2 Power Supply Module Options ................................................................................................................................38
3.2.1 Power Supply Module Efficiency.............................................................................................................................38
3.2.2 Power Supply Module Mechanical Overview .....................................................................................................39
3.2.3 Power Cord Specification Requirements ............................................................................................................. 41
3.3 AC Power Supply Input Specifications..................................................................................................................41
3.3.1 Power Factor .................................................................................................................................................................... 42
3.3.2 AC Input Voltage Specification................................................................................................................................. 42
3.3.3 AC Line Isolation Requirements...............................................................................................................................42
3.3.4 AC Line Dropout/Holdup ............................................................................................................................................42
3.3.5 AC Line Fuse.....................................................................................................................................................................43
3.3.6 AC Inrush ........................................................................................................................................................................... 43
3.3.7 AC Line Transient Specification ...............................................................................................................................43
3.3.8 Susceptibility Requirements...................................................................................................................................... 44
3.3.9 Electrostatic Discharge Susceptibility ................................................................................................................... 44
3.3.10 Fast Transient/Burst......................................................................................................................................................44
3.3.11 Radiated Immunity ........................................................................................................................................................ 44
3.3.12 Surge Immunity...............................................................................................................................................................44
3.3.13 Power Recovery .............................................................................................................................................................. 45

Intel® Server System R2000WF Product Family Technical Product Specification
6
3.3.14 Voltage Interruptions ...................................................................................................................................................45
3.3.15 Protection Circuits .........................................................................................................................................................45
3.3.16 Power Supply Status LED ...........................................................................................................................................46
3.4 DC Power Supply Input Specifications (iPC –AXX750DCCRPS) ................................................................46
3.4.1 DC Input Voltage ............................................................................................................................................................46
3.4.2 DC Input Fuse...................................................................................................................................................................47
3.4.3 DC Inrush Current ..........................................................................................................................................................47
3.4.4 DC Input under Voltage...............................................................................................................................................47
3.4.5 DC Holdup Time and Dropout..................................................................................................................................47
3.4.6 DC Line Surge Voltages (Line Transients)............................................................................................................ 47
3.4.7 Susceptibility Requirements...................................................................................................................................... 48
3.4.8 Protection Circuits .........................................................................................................................................................48
3.5 Cold Redundancy Support.........................................................................................................................................49
3.5.1 Powering on Cold Standby Supplies to Maintain Best Efficiency.............................................................. 49
3.5.2 Powering on Cold Standby Supplies during a Fault or Over Current Condition.................................50
3.5.3 BMC Requirements........................................................................................................................................................50
3.5.4 Power Supply Turn on Function.............................................................................................................................. 50
3.6 Closed Loop System Throttling (CLST)................................................................................................................. 50
3.7 Smart Ride Through (SmaRT) ................................................................................................................................... 51
3.8 Server Board Power Connectors .............................................................................................................................51
3.8.1 Power Supply Module Card Edge Connector.....................................................................................................51
3.8.2 Optional 12 V Power Connectors for High Power Add-in Cards ............................................................... 51
3.8.3 Hot Swap Backplane Power Connector................................................................................................................52
3.8.4 Peripheral Power Connector..................................................................................................................................... 53
4. Thermal Management ............................................................................................................................................. 54
4.1 Thermal Operation and Configuration Requirements....................................................................................56
4.1.1 Memory Slot Population Requirements ...............................................................................................................57
4.2 Thermal Management Overview..............................................................................................................................58
4.2.1 Fan Speed Control......................................................................................................................................................... 59
4.3 System Fans .....................................................................................................................................................................62
4.4 Power Supply Module Fans ....................................................................................................................................... 64
4.5 FRUSDR Utility................................................................................................................................................................. 64
5. Intel® Xeon Phi™ Coprocessor and Non-Intel GPGPU Add-in Card Support............................................... 65
5.1 Support Criteria .............................................................................................................................................................. 65
5.2 Intel® Xeon Phi™ Coprocessor Card – System Configuration Requirements......................................... 68
6. System Storage and Peripheral Drive Bay Overview........................................................................................ 69
6.1 Front Mount –Drive Bay Support............................................................................................................................ 69
6.2 Hot Swap Drive Carriers ..............................................................................................................................................71
6.3 Peripheral Power Sources .......................................................................................................................................... 73
6.4 Hot Swap Backplane Support...................................................................................................................................73
6.4.1 SGPIO Functionality...................................................................................................................................................... 75
6.4.2 I2C Functionality.............................................................................................................................................................75

Intel® Server System R2000WF Product Family Technical Product Specification
7
6.5 8 x 2.5” Drive SATA/SAS/NVMe* Combo Backplane....................................................................................... 75
6.6 8 x 2.5” Drive Dual Port SAS Backplane................................................................................................................77
6.7 8 x 3.5” Drive Hot-Swap Backplane Overview....................................................................................................79
6.8 12 x 3.5” Drive Hot-Swap Backplane Overview................................................................................................. 80
6.9 2 x 2.5” Hot Swap Drive Bay Accessory Kit..........................................................................................................81
6.10 Internal Fixed Mount Solid State Drive (SSD) Support...................................................................................85
7. Storage Controller Options Overview ................................................................................................................. 86
7.1 Onboard SATA Support ..............................................................................................................................................86
7.1.1 Staggered Disk Spin-Up..............................................................................................................................................88
7.2 Onboard SATA Software RAID Support ............................................................................................................... 88
7.2.1 Intel® Rapid Storage Technology Enterprise (Intel® RSTe) 5.0....................................................................89
7.2.2 Intel® Embedded Server RAID Technology 2 (ESRT2) 1.60 for SATA......................................................89
7.3 M.2 SSD Support ............................................................................................................................................................ 91
7.3.1 Embedded RAID Support ...........................................................................................................................................91
7.4 PCIe NVMe* Drive Support......................................................................................................................................... 92
7.4.1 Onboard PCIe* OCuLink Connectors.....................................................................................................................92
7.4.2 Intel® Volume Management Device (Intel® VMD) for NVMe* .......................................................................92
7.4.3 Intel® Virtual RAID on Chip (Intel® VROC) for NVMe* ......................................................................................96
7.4.4 NVMe* Drive Population Rules for Intel® VROC ................................................................................................97
7.5 Intel® Integrated RAID Module Support............................................................................................................. 101
7.5.1 RAID Maintenance Free Backup Unit (AXXRMFBUx) Support .................................................................. 102
7.6 Intel® RAID Expander Card Support .................................................................................................................... 103
8. Front Control Panel and I/O Panel Overview................................................................................................... 107
8.1 I/O Panel Features ...................................................................................................................................................... 107
8.2 Control Panel Features ............................................................................................................................................. 108
9. PCIe* Riser Card Support...................................................................................................................................... 111
9.1 Riser Card Assembly .................................................................................................................................................. 112
9.2 Riser Slot #1 and Riser Slot #2 Riser Card Options ...................................................................................... 114
9.2.1 Three-Slot PCIe Riser Card (iPC –A2UL8RISER2) ......................................................................................... 114
9.2.2 Two-Slot PCIe Riser Card (iPC –A2UL16RISER2).......................................................................................... 114
9.3 Riser Slot #3 Riser Card Option (iPC –A2UX8X4RISER)............................................................................. 115
10. OCP* Compatible Intel® Ethernet Network Adapter Support....................................................................... 116
11. Basic and Advanced Server Management Features........................................................................................ 117
11.1 Dedicated Management Port ................................................................................................................................. 118
11.2 Embedded Web Server............................................................................................................................................. 118
11.3 Advanced Management Feature Support (Intel® RMM4 Lite)................................................................... 120
11.3.1 Keyboard, Video, Mouse (KVM) Redirection .................................................................................................... 120
11.3.2 Remote Console .......................................................................................................................................................... 121
11.3.3 Performance.................................................................................................................................................................. 121
11.3.4 Availability...................................................................................................................................................................... 122
11.3.5 Security............................................................................................................................................................................ 122
11.3.6 Usage................................................................................................................................................................................ 122

Intel® Server System R2000WF Product Family Technical Product Specification
8
11.3.7 Force-enter BIOS Setup ........................................................................................................................................... 122
11.3.8 Media Redirection....................................................................................................................................................... 122
Appendix A. Integration and Usage Tips.............................................................................................................. 124
Appendix B. POST Code Diagnostic LED Decoder............................................................................................. 125
B.1. Early POST Memory Initialization MRC Diagnostic Codes..................................................................... 126
B.2. BIOS POST Progress Codes.................................................................................................................................... 129
Appendix C. POST Code Errors .............................................................................................................................. 132
C.1. POST Error Beep Codes ........................................................................................................................................... 140
Appendix D. System Configuration Table for Thermal Compatibility........................................................... 141
Appendix E. System Cable Routing Diagrams .................................................................................................... 158
Appendix F. Statement of Volatility...................................................................................................................... 163
Glossary ........................................................................................................................................................................... 166

Intel® Server System R2000WF Product Family Technical Product Specification
9
List of Figures
Figure 1. System components overview.......................................................................................................................................... 21
Figure 2. 2U standard top cover .........................................................................................................................................................21
Figure 3. Server Board Architecture ..................................................................................................................................................22
Figure 4. S2600WFQ Server Board Architecture.........................................................................................................................23
Figure 5. Server board component/feature identification.......................................................................................................24
Figure 6. Intel® Light Guided Diagnostics –LED identification............................................................................................... 25
Figure 7. Intel® Light Guided Diagnostics - DIMM fault LEDs.................................................................................................. 26
Figure 8. System configuration and recovery jumpers .............................................................................................................26
Figure 9. Back panel feature identification..................................................................................................................................... 27
Figure 10. Front control panel options............................................................................................................................................ 27
Figure 11. 3.5" x 8 front drive bay configuration –R2308WFxxxx .......................................................................................28
Figure 12. 3.5" x 12 front drive bay configuration –R2312WFxxxx..................................................................................... 28
Figure 13. 2.5" x 8 front drive bay configuration –R2208WFxxxx .......................................................................................28
Figure 14. 2.5" x 16 front drive bay configuration –R2208WFxxxx + 8 Drive Accessory Kit ....................................28
Figure 15. 2.5" x 24 front drive bay configuration –R2224WFxxxx..................................................................................... 28
Figure 16. Concept Reference Design –Front Bezel Installation.......................................................................................... 29
Figure 17. Chassis dimensions, 2.5” drive bay..............................................................................................................................30
Figure 18. Label emboss dimensions ...............................................................................................................................................31
Figure 19. Pull-out tab label emboss dimensions, non-storage models...........................................................................32
Figure 20. Pull-out tab label area dimensions, storage models............................................................................................32
Figure 21. System cable routing channels......................................................................................................................................33
Figure 22. Power supply module identification ...........................................................................................................................37
Figure 23. Power supply module mechanical overview ........................................................................................................... 39
Figure 24. 1100W AC power supply module mechanical drawing ......................................................................................40
Figure 25. 1300W AC power supply module mechanical drawing......................................................................................40
Figure 26. AC power cord specification ...........................................................................................................................................41
Figure 27. DC power cord specification...........................................................................................................................................41
Figure 28. Power cable for the OPT_12V........................................................................................................................................ 52
Figure 29. System Airflow and Fan Identification........................................................................................................................54
Figure 30. System DIMM/DIMM blanks for 8x2.5, 16x2.5, and 8x3.5 drive configurations.......................................57
Figure 31. System DIMM/DIMM blanks for 24x2.5 and 12x3.5 drive configurations................................................... 57
Figure 32. High-level fan speed control model............................................................................................................................62
Figure 33. Server board 2U system fan connector locations ................................................................................................. 62
Figure 34. System fan assembly .........................................................................................................................................................63
Figure 35. 2-slot PCIe* riser card........................................................................................................................................................ 65
Figure 36. Auxiliary 12 V power cable (iPC –AXXGPGPUCABLE) .........................................................................................66
Figure 37. High airflow air duct included in accessory kit AWFCOPRODUCTAD...........................................................66
Figure 38. Shipping bracket..................................................................................................................................................................67
Figure 39. Shipping bracket placement...........................................................................................................................................68
Figure 40. 2.5" front mount drive bay, 8 drive (R2208WFxxx) and 16 drive configuration option.........................69

Intel® Server System R2000WF Product Family Technical Product Specification
10
Figure 41. 2.5" front mount drive bay, 24 drive (R2224WFxxx) configuration................................................................69
Figure 42. 3.5" drive bay, 8 drive configuration........................................................................................................................70
Figure 43. 3.5” drive bay, 12 drive configuration.........................................................................................................................70
Figure 44. Drive carrier removal.......................................................................................................................................................... 71
Figure 45. 2.5" SSD mounted to 3.5" drive carrier.......................................................................................................................71
Figure 46. Drive tray LED identification ...........................................................................................................................................72
Figure 47. Server board peripheral power connectors .............................................................................................................73
Figure 48. 3.5" backplane placement ...............................................................................................................................................74
Figure 49. 2.5" drive bay module placement options................................................................................................................74
Figure 50. 8 x 2.5" SAS/SATA/NVMe* hot swap backplane, front side ..............................................................................75
Figure 51. 8 x 2.5" SAS/SATA/NVMe* hot swap backplane, back side............................................................................... 76
Figure 52. 8 x 2.5" dual port SAS backplane, back side............................................................................................................76
Figure 53. 8 x 2.5" dual port SAS backplane, front side............................................................................................................77
Figure 54 . 8 x 2.5" dual port SAS backplane, Back side...........................................................................................................78
Figure 55. 8 x 3.5" HSBP Connector Identification......................................................................................................................79
Figure 56. 12 x 3.5" hot swap backplane, front side................................................................................................................... 80
Figure 57. 12 x 3.5" HSBP connector identification.................................................................................................................... 81
Figure 58. 2 x 2.5" rear mount backplane kit placement..........................................................................................................82
Figure 59. 2 x 2.5" hot swap backplane ...........................................................................................................................................83
Figure 60. 2.5" Solid state drive (SSD) mounting option..........................................................................................................85
Figure 61. Onboard storage support features .............................................................................................................................. 86
Figure 62. BIOS setup Mass Storage Controller Configuration screen...............................................................................88
Figure 63. ESRT2 SATA RAID-5 upgrade key................................................................................................................................90
Figure 64. M.2 module connector locations .................................................................................................................................. 91
Figure 65. Onboard OCuLink connectors .......................................................................................................................................92
Figure 66. NVMe* storage bus event/error handling ................................................................................................................. 93
Figure 67. VMD support disabled in BIOS setup.......................................................................................................................... 95
Figure 68. Intel® VMD support enabled in BIOS setup.............................................................................................................. 95
Figure 69. Intel® VROC basic architecture overview................................................................................................................... 96
Figure 70. Intel® VROC upgrade key.................................................................................................................................................. 97
Figure 71. Backplane cabling from two PCIe sources................................................................................................................98
Figure 72. Intel® Integrated RAID Module.................................................................................................................................... 102
Figure 73. Triple RMFBU (default) mounting bracket installation..................................................................................... 103
Figure 74. Dual RMFBU mounting bracket installation .......................................................................................................... 103
Figure 75. SAS expander card installation................................................................................................................................... 104
Figure 76. Intel® RAID Expander RES3FV288 connector identification .......................................................................... 105
Figure 77. 12 GB internal 36-Port Intel® RAID Expander Card RES3TV360 connector identification ............... 106
Figure 78. Front I/O panel features ................................................................................................................................................ 107
Figure 79. Front control panel features........................................................................................................................................ 108
Figure 80. PCIe* add-in card support ............................................................................................................................................ 111
Figure 81. Riser card #1 bracket ...................................................................................................................................................... 112
Figure 82. Left and right views of riser card #2 and #3 bracket......................................................................................... 113

Intel® Server System R2000WF Product Family Technical Product Specification
11
Figure 83. Full height/full length add-in card support........................................................................................................... 113
Figure 84. Three-slot PCIe* riser card (iPC –A2UL8RISER2) ............................................................................................... 114
Figure 85. Two-slot PCIe riser card (iPC –A2UL16RISER2).................................................................................................. 114
Figure 86. Low profile riser card (iPC –A2UX8X4RISER)....................................................................................................... 115
Figure 87. OCP module placement................................................................................................................................................. 116
Figure 88. Intel® RMM4 Lite activation key placement........................................................................................................... 118
Figure 89. Dedicated management port....................................................................................................................................... 118
Figure 90. On-board POST Diagnostic LEDs .............................................................................................................................. 125
Figure 91. R2308WFxxx system cable routing diagram ........................................................................................................ 158
Figure 92. R2208WFxxx system cable routing diagram ........................................................................................................ 159
Figure 93. R2312WFxxx system cable routing diagram ........................................................................................................ 160
Figure 94. R2208WFxxx + 8 drives system cable routing diagram ................................................................................... 161
Figure 95. R2224WFxxx system cable routing diagram ........................................................................................................ 162

Intel® Server System R2000WF Product Family Technical Product Specification
12
List of Tables
Table 1. Reference Documents ...........................................................................................................................................................15
Table 2. Intel® Server Board S2600WF product family features........................................................................................... 17
Table 3. Intel® Server System R2000WF product family configurations........................................................................... 19
Table 4. System environmental limits summary..........................................................................................................................35
Table 5. Product weight information................................................................................................................................................36
Table 6. 1100 Watt AC power supply efficiency (80 Plus Platinum)...................................................................................38
Table 7. 1300 Watt AC power supply efficiency (80 Plus Titanium) ................................................................................... 38
Table 8. 750 Watt DC power supply efficiency (80 Plus Gold) ..............................................................................................38
Table 9. AC power cord specifications.............................................................................................................................................41
Table 10. DC power cable connector pin-out...............................................................................................................................41
Table 11. AC Power Factor –1100W Power Supply ..................................................................................................................42
Table 12 . AC Power Factor - 1300W Power Supply.................................................................................................................. 42
Table 13. AC input voltage range, 1100 W power supply .......................................................................................................42
Table 14. AC input voltage range, 1300 W power supply .......................................................................................................42
Table 15. AC line holdup time, 1100 W power supply.............................................................................................................. 43
Table 16. AC line holdup time, 1300 W power supply.............................................................................................................. 43
Table 17. AC line sag transient performance (10 sec interval between each sagging) ...............................................43
Table 18. AC line surge transient performance............................................................................................................................ 44
Table 18. Maximum Load Ratings ......................................................................................................................................................44
Table 19. Performance criteria............................................................................................................................................................ 44
Table 20. Over current protection, 1300 W power supply...................................................................................................... 45
Table 21. Over current protection, 1100 W power supply...................................................................................................... 45
Table 22. Over voltage protection (OVP) limits, 1300 W power supply............................................................................46
Table 23. Over voltage protection (OVP) limits, 1100 W power supply............................................................................46
Table 24. LED indicators ........................................................................................................................................................................46
Table 25. DC input rating.......................................................................................................................................................................47
Table 26. DC holdup time...................................................................................................................................................................... 47
Table 27. Line voltage transient limits .............................................................................................................................................47
Table 28. Performance criteria............................................................................................................................................................ 48
Table 29. Over current protection ..................................................................................................................................................... 48
Table 30. Over voltage protection limits......................................................................................................................................... 49
Table 31. Example load share threshold for activating supplies..........................................................................................50
Table 32. Power supply module output power connector pin-out.....................................................................................51
Table 33. Riser slot power pin-out (OPT_12V_PWR_#)............................................................................................................ 52
Table 34. Hot swap backplane power connector pin-out (“HSBP PWR").......................................................................... 52
Table 35. Peripheral drive power connector pin-out (“Peripheral PWR”).........................................................................53
Table 36. System volumetric airflow, Intel® Server System R2308WFxxx........................................................................ 54
Table 37 . System volumetric airflow, Intel® Server System R2308WFxxx w/Intel® Xeon Phi™ (passive)............54
Table 38. System volumetric airflow, Intel® Server System R2312WFxxx........................................................................ 55
Table 39. System volumetric airflow, Intel® Server System R2208WFxxx........................................................................ 55

Intel® Server System R2000WF Product Family Technical Product Specification
13
Table 40 . System volumetric airflow, Intel® Server System R2208WFxxx w/Intel® Xeon Phi™ (passive)............55
Table 41. System volumetric airflow, Intel® Server System R2208WFxxx + 8 Drive Acc (16x2.5”)........................55
Table 42 . System volumetric airflow, Intel® Server System R2208WFxxx + 8 Drive Acc (16x2.5”) w/Intel®
Xeon Phi™ (passive)..........................................................................................................................................................................55
Table 43. System volumetric airflow, Intel® Server System R2224WFxxx........................................................................ 55
Table 44. PCIe* add-in card airflow (LFM) support limits –R2312WFxxx and R2224WFxxx ...................................56
Table 45. PCIe* add-in card airflow (LFM) support limits –R2208WFxxx, R2208WFxxx + 8 drive accessory kit,
and R2308WFxxx.............................................................................................................................................................................. 57
Table 46. System fan connector pin-out.........................................................................................................................................63
Table 47. 2-slot PCIe* riser card description and routing........................................................................................................ 65
Table 48. Drive status LED states....................................................................................................................................................... 72
Table 49. Drive activity LED states.....................................................................................................................................................72
Table 50. PCIe* SSD drive status LED states ................................................................................................................................. 72
Table 51. I2C cable connector pin-out ............................................................................................................................................ 76
Table 52. Power harness connector pin-out................................................................................................................................. 77
Table 53. Power harness connector pin-out................................................................................................................................. 78
Table 54. I2C cable connector pin-out ............................................................................................................................................ 79
Table 55. 7-pin SATA cable connector pin-out............................................................................................................................83
Table 56. Power connector pin-out .................................................................................................................................................. 84
Table 57. I2C connector pin-out......................................................................................................................................................... 84
Table 58. SGPIO connector pin-out.................................................................................................................................................. 84
Table 59. SATA and sSATA controller feature support ............................................................................................................87
Table 60. SATA and sSATA controller BIOS setup utility options........................................................................................87
Table 61. CPU - PCIe* port routing.................................................................................................................................................... 94
Table 62. Intel® VROC upgrade key options.................................................................................................................................. 97
Table 63. Intel® SAS RAID expander card support................................................................................................................... 105
Table 64. System status LED state definitions........................................................................................................................... 109
Table 65. Power/sleep LED functional states ............................................................................................................................ 110
Table 66. Riser slot #1 PCIe* root port mapping...................................................................................................................... 112
Table 67. Riser slot #2 PCIe* root port mapping...................................................................................................................... 112
Table 68. Riser slot #3 PCIe* root port mapping...................................................................................................................... 112
Table 69. Three-slot PCIe* riser card slot description ........................................................................................................... 114
Table 70. Two-slot PCIe riser card slot description................................................................................................................. 114
Table 71. Low profile riser card slot description ...................................................................................................................... 115
Table 72. OCP* Compatible Intel® Ethernet Network Adapters ......................................................................................... 116
Table 73. Intel® Remote Management Module 4 (RMM4) options.................................................................................... 117
Table 74. Basic and advanced server management features overview .......................................................................... 117
Table 75. POST progress code LED example.......................................................................................................................... 125
Table 76. MRC progress codes......................................................................................................................................................... 126
Table 77. MRC fatal error codes....................................................................................................................................................... 128
Table 78. POST progress codes....................................................................................................................................................... 129
Table 79. POST Error Messages and Handling.......................................................................................................................... 133

Intel® Server System R2000WF Product Family Technical Product Specification
14
Table 80. POST error beep codes................................................................................................................................................... 140
Table 81. Integrated BMC beep codes.......................................................................................................................................... 140
Table 82. Thermal configuration table for system in “normal” operating mode........................................................ 142
Table 83. Thermal configuration table for system in “fan fail” operating mode......................................................... 150
Table 84. Intel® Server Board S2600WF (iPN –H48104-xxx).............................................................................................. 164
Table 85. 2U 3-Slot PCIe* Riser Card (iPN –H20087-xxx).................................................................................................... 164
Table 86. 2U 2-Slot PCIe* Riser Card (iPN –H20078-xxx).................................................................................................... 164
Table 87. Riser Slot #3 Low Profile PCIe* Riser Card (iPN –G94347-xxx) ..................................................................... 164
Table 88. Common Front Panel Board (iPN –H29366-xxx)................................................................................................. 164
Table 89. Storage System Model Mini- Front Panel Board (iPN –G28538-xxx) ......................................................... 164
Table 90. 2U 8 x 3.5” Hot Swap Back Plane (iPN – G97160-xxx) ....................................................................................... 164
Table 91. 2U 12 x 3.5” Hot Swap Back Plane (iPN – H88392-xxx) .................................................................................... 164
Table 92. 2U 8 x 2.5” SAS Hot Swap Back Plane (iPN –H95877-xxx)............................................................................... 165
Table 93. Intel® 2U 8 x 2.5” Dual Port Hot Swap Back Plane Accessory Kit (iPC – A2U8X25S3DPDK) 2U 8 x
2.5” Dual Port Hot Swap Back Plane (iPN – G97166-xxx)............................................................................................. 165
Table 94. Intel® 2U 2 x 2.5” Rear Hot Swap Back Plane Accessory Kit (iPC – A2UREARHSDK) 2U 2 x 2.5” Rear
Hot Swap Back Plane (iPN –G94339-xxx)........................................................................................................................... 165
Table 95. Intel® Remote Management Module Lite Accessory Option (iPC –AXXRMM4LITE2)........................... 165

Intel® Server System R2000WF Product Family Technical Product Specification
15
1. Introduction
This Technical Product Specification (TPS) provides system level information for the Intel® Server System
R2000WF product family.
This document describes the embedded functionality and available features of the integrated server system
which includes: the chassis layout, system boards, power subsystem, cooling subsystem, storage subsystem
options, and available installable options. Note that some system features are provided as configurable
options and may not be included standard in every system configuration offered. Please reference the Intel®
Server Board S2600WF Product Family Configuration Guide for a list of configured options for all system
models made available.
For more additional product information, refer to the documents listed in Table 1.
Table 1. Reference Documents
Document Title
Document Classification
Intel® Server Board S2600WF Product Family Technical Product Specification
Public
Intel® Server S2600WF Product Family Configuration Guide
Public
Intel® Server System R1000WF Product Family System Integration and Service Guide
Public
Intel® Server S2600WF Product Family Power Budget & Thermal Configuration Tool
Public
Intel® Servers System BMC Firmware EPS for Intel® Xeon® processor Scalable Family
Intel Confidential
Intel® Server System BIOS EPS for Intel® Xeon® processor Scalable Family
Intel Confidential
Intel® Chipset C62X Product Family External Design Specification
Intel Confidential
Intel® Ethernet Connection X557-AT2 Product Brief
Public
Advanced Configuration and Power Interface Specification, Revision 3.0, http://www.acpi.info/.
Public
Intelligent Platform Management Interface Specification, Version 2.0. 2004.
Public
Intelligent Platform Management Bus Communications Protocol Specification, Version 1.0. 1998
Public
Platform Support for Serial-over-LAN (SOL), TMode, and Terminal Mode External Architecture
Specification, Version 1.1, 02/01/02
Public
Intel® Remote Management Module User’s Guide, Intel Corporation.
Public
Alert Standard Format (ASF) Specification, Version 2.0, 23 April 2003, ©2000-2003, Distributed
Management Task Force, Inc., http://www.dmtf.org.
Public
SmaRT & CLST Architecture on Intel Systems and Power Supplies Specification
Public
Intel® Remote Management Module 4 Technical Product Specification
Public
Intel® Remote Management Module 4 and Integrated BMC Web Console Users Guide
Public
EPS and EDS documents are made available under NDA with Intel and must be ordered through an Intel
representative.

Intel® Server System R2000WF Product Family Technical Product Specification
16
1.1 Document Outline
This document is divided into the following chapters:
Chapter 1 –Introduction
Chapter 2 –Product Family Overview
Chapter 3 –System Power
Chapter 4 –Thermal Management
Chapter 5 –System Storage and Peripherals Drive Bay Overview
Chapter 6 –Storage Controller Options Overview
Chapter 7 –Front Control Panel and I/O Panel Overview
Chapter 8 –PCIe* Riser Card Support
Chapter 9 –Intel® I/O Module Support
Chapter 10 –Basic and Advanced Server Management Features
Appendix A –Integration and Usage Tips
Appendix B –POST Code Diagnostic LED Decoder
Appendix C –Post Code Errors
Appendix D –System Configuration Tables for Thermal Compatibility
Appendix E –System Cable Routing Diagrams
Glossary
1.2 Intel® Server Board Use Disclaimer
Intel® Server Boards support add-in peripherals and contain a number of high-density very large scale
integration (VLSI) and power delivery components that need adequate airflow to cool. Intel ensures through
its own chassis development and testing that when Intel server building blocks are used together, the fully
integrated system will meet the intended thermal requirements of these components. It is the responsibility
of the system integrator who chooses not to use Intel developed server building blocks to consult vendor
datasheets and operating parameters to determine the amount of airflow required for their specific
application and environmental conditions. Intel Corporation cannot be held responsible if components fail
or the server board does not operate correctly when used outside any of its published operating or non-
operating limits.
1.3 Product Errata
Product that is currently shipping may have features or functionality that deviate from published
specifications. These deviations are generally discovered after the product has gone into formal production.
Intel terms these deviations as product errata. Known product errata are published in the Monthly
Specification Update for the given product family which can be downloaded from
http://www.intel.com/support .

Intel® Server System R2000WF Product Family Technical Product Specification
17
2. Server System Family Overview
The 2U server platforms within the Intel® Server System R2000WF product family offer a variety of system
options to meet varied configuration requirements of high-density, high-performance computing
environments.
This chapter provides a high-level overview of the system features and available options supported in
different system models within this product family. Greater detail for each major sub-system, feature or
option is provided in following chapters.
The following table identifies the feature set of each supported server board.
Table 2. Intel® Server Board S2600WF product family features
Intel Server Board
Product Code
S2600WFT
S2600WF0
S2600WFQ
Processor Support
Two LGA3647-0 (Socket P) processor sockets
Support for one or two Intel®Xeon®processor Scalable family (Platinum, Gold, Silver, and Bronze)
oPrevious generation Intel®Xeon®processors are not supported
Maximum supported Thermal Design Power (TDP) of up to 205W (Board Only)
Note: Intel Server Systems based on this server board family may support a lower maximum Thermal
Design Power (TDP). See appropriate Intel System TPS for max supported TDP
Memory
24 Total DIMM slots (12 DIMMs per processor)
o6 Memory Channels per processor / 2 DIMMs per Channel
Registered DDR4 (RDIMM), Load Reduced DDR4 (LRDIMM)
Memory Capacity
oUp to 1.5TB for Gold and Platinum CPUs; Up to 768GB for Silver and Bronze CPUs
Memory data transfer rates:
oUp to 2666 MT/s @ 1 DPC and 2 DPC (Processor SKU Dependent) DPC = DIMMs Per
Channel
DDR4 standard voltage of 1.2V
Intel® C62x Series
Chipset
Intel® C624 Chipset
Intel® C624 Chipset
Intel® C628 Chipset
Intel® Quick Assist
Technology (QAT)
No
No
Yes
Intel® Omni-Path
Fabric Support
Yes
Yes
Yes
On-board LAN
Dual Port RJ45 10GbE
No
No
Intel® OCP Module
Support
iPC = Intel Product
Code
iPC 557T2OCPG1P5 –
Dual Port 10Gb RJ45
iPC
527DA2OCPG1P5–
Dual Port SFP+
iPC I357T4OCPG1P5 –Quad Port
1Gb RJ45
iPC X527DA4OCPG1P5 –Quad
Port SFP+
iPC X557T2OCPG1P5 –Dual Port
10Gb RJ45
iPC X527DA2OCPG1P5 –Dual Port
SFP+
iPC I357T4OCPG1P5 –Quad Port
1Gb RJ45
iPC X527DA4OCPG1P5 –Quad
Port SFP+
iPC X557T2OCPG1P5 –Dual Port
10Gb RJ45
iPC X527DA2OCPG1P5 –Dual Port
SFP+
Intel® Integrated SAS
Module Support
Yes
Yes
Yes
Onboard PCIe* NVMe
Support
4 –PCIe OCuLink
Connectors
Intel® VMD Support
Intel® RSTe VROC
Support –Acc. Option
4 –PCIe OCuLink Connectors
Intel® VMD Support
Intel® RSTe VROC Support –Acc.
Option
2 –OCuLink Connectors
Intel® VMD Support
Intel® RSTe VROC Support –Acc.
Option

Intel® Server System R2000WF Product Family Technical Product Specification
18
Intel Server Board
Product Code
S2600WFT
S2600WF0
S2600WFQ
Onboard SATA
Support
12 x SATA 6Gbps ports (6Gb/s, 3 Gb/s and 1.5Gb/s transfer
rates are supported)
oTwo single port 7-pin SATA connectors
oTwo M.2 connectors –SATA / PCIe*
oTwo 4-port mini-SAS HD (SFF-8643) connectors
Embedded SATA Software RAID
oIntel® Rapid Storage RAID Technology (RSTe) 5.0
oIntel® Embedded Server RAID Technology 2
(ESRT2) 1.60 with optional RAID 5 key support
NOTE: ESRT2 is only supported on S2600WFT and S2600WF0
boards
4 x SATA 6Gbps ports (6Gb/s, 3
Gb/s and 1.5Gb/s transfer rates
are supported)
oTwo single port 7-pin
SATA connectors
oTwo M.2 connectors –
SATA / PCIe*
Embedded SATA Software RAID
oIntel® Rapid Storage
RAID Technology
(RSTe) 5.0
NOTE: 4-port mini-SAS HD
connectors are present on
S2600WFQ but are not configure as
SATA, these cables are used only for
Intel® Quick Assist Technology (QAT).
Riser Card Support
Concurrent support for up to three riser cards
Riser #1 –PCIe* 3.0 x24 (CPU1 x16, CPU2 x8) –2 and 3 slot riser card options available
Riser #2 –PCIe* 3.0 x24 (CPU2 x24) –2 and 3 slot riser card options available
Riser #3 (2U systems only) –PCIe* 3.0 (CPU 2 x12) –2 slot riser card available
Video
Integrated 2D Video Controller
16MB of DDR4 Video Memory
One DB-15 External Connector
One 14-Pin Internal connector for optional Front Panel Video support
USB Support
Three external USB 3.0 ports
One internal Type-A USB 2.0 port
One internal 20-pin connector for optional 2x USB 3.0 port Front Panel support
One Internal 10-pin connector for optional 2x USB 2.0 port Front Panel support
Serial Port Support
One external RJ-45 Serial-A port connector
One internal DH-10 Serial-B port header for optional front or rear serial port support
Server Management
Integrated Baseboard Management Controller, IPMI 2.0 compliant
Support for Intel®Server Management Software
On-board dedicated RJ45 management port
Support for Advanced Server Management features via an Intel® Remote Management Module 4 Lite
Accessory Option (iPC –AXXRMM4LITE2)
Security
Intel® Trusted Platform Module 2.0 (Rest of World) –iPC- AXXTPMENC8 (Accessory Option)
Intel® Trusted Platform Module 2.0 (China Version) –iPC- AXXTPMCHNE8 (Accessory Option)
System Fan Support
Six System fans supported in two different connector formats hot swap (2U) and cabled (1U)
oSix 10-pin managed system fan headers (Sys_Fan 1-6) –Used for 1U system configuration
oSix 6-pin hot swap capable managed system fan connectors (Sys_Fan 1-6) –Used for 2U
system Configuration

Intel® Server System R2000WF Product Family Technical Product Specification
19
The following table describes the features of the server system configurations. Storage system
configurations include R2312WFxxxx and R2224WFxxxx. Non-storage system configurations include
R2308WFxxxx, R2208WFxxxx, and R2208WFxxxx +8 (base 8 drive system with 8 drive add in module).
Table 3. Intel® Server System R2000WF product family configurations
Feature
Description
Chassis Type
2U rack mount chassis
Server Board
Intel® Server Board S2600WF product family
Maximum Supported Processor
Thermal Design Power (TDP)
Up to 140 W in all Intel system configuration options
165 W processors supported on Intel® Server Chassis R2208WFxxxx and R2308WFxxxx
configurations only
See Thermal Config Tables at end of this document for more information
External I/O Connections
DB-15 video connectors
oFront and back (non-storage system configurations only)
RJ-45 serial port A connector
Dual RJ-45 network interface connectors (S2600WFT-based systems only)
Dedicated RJ-45 server management NIC
(3) –USB 3.0 connectors on back panel
(2) –USB 3.0 connectors on front panel (non-storage system configurations only)
(1) –USB 2.0 connector on rack handle (storage configurations only)
Internal I/O
Connectors/Headers
(1) –Type-A USB 2.0 connector
(1) –DH-10 serial port B connector
System Fans
(6) –managed 60 mm hot swap capable system fans
Integrated fans included with each installed power supply module
Riser Card Support
Support for three riser cards:
Riser #1 –PCIe* 3.0 x24 - up to 3 PCIe slots
Riser #2 –PCIe* 3.0 x24 - up to 3 PCIe slots
Riser #3 –PCIe* 3.0 x16 –up to 2 PCIe slots –Low profile cards only (optional)
With three riser cards installed, up to eight possible add-in cards can be supported:
(4) full height/half-length + (2) full height/half-length add-in cards via Risers #1 and #2
(2) low profile add in cards via riser #3 (option)
Power Supply Options
The server system can have up to two power supply modules installed, providing support for
the following power configurations: 1+0, 1+1 redundant power, and 2+0 combined power.
(3) power supply options:
AC 1100W Platinum
AC 1300W Titanium
DC 750W Gold

Intel® Server System R2000WF Product Family Technical Product Specification
20
Feature
Description
Drive Bay Options
Hot Swap Backplane Options:
Note: All available backplane options have support for SAS 3.0 (12 Gb/sec)
8 x 3.5” SAS/ SATA
8 x 2.5” combo backplane – SAS/SATA/NVMe
8 x 2.5” Dual Port SAS
12 x 3.5” SAS/ SATA (supports up to 2 NVMe drives)
Storage Bay Options:
8 x 3.5” SAS/SATA hot swap drive bays
12 x 3.5” SAS/SATA hot swap drive bays (supports up to 2 NVMe drives)
8 x 2.5” SAS/SATA/NVMe hot swap drive bays
16 x 2.5” SAS/SATA/NVMe hot swap drive bays
24 x 2.5” SAS/SATA/NVMe swap drive bays
2 x 2.5” SATA SSD Back of Chassis Hot Swap Drive Bays (accessory Option)
2 x internal fixed mount 2.5” SSDs (all SYSTEM MODELs)
Supported Rack Mount Kit
Accessory Options
AXXELVRAIL –Enhanced value rack mount rail kit - 424mm max travel length, 59kgs
(130lbs.) max supported weight
AXXFULLRAIL-2U Premium rail with CMA support –800mm max travel length, 45kgs
(99lbs.) max supported weight
AXXSHRTRAIL - 2U Premium rail without CMA support - 788mm max travel length, 45kgs
(99lbs.) max supported weight
AXX2POSTBRCKT –Two post fixed mount bracket kit
AXXCMA2–Cable Management Arm –(*supported with AXXFULLRAIL only)