Intel H2000WP User manual

Intel®Server System H2000WP
Family
Technical Product Specification
Intel order number: G52418-006
Revision 1.6
May, 2014

Revision History Intel®Server System H2000WP Family TPS
Revision History
Date
Revision Number
Modifications
January, 2012 1.0 Initial release.
April, 2012 1.1
Updated Table 66 PCI Express* Slot Pinout on Riser Card.
Updated System Level Environmental Limits.
Updated node cooling fan redundancy features.
Updated system Power Supply redundancy features.
June, 2012 1.2
Updated environmental specifications with ASHRAE
specification.
Updated Processor TDP to conditional support 135W.
Added new bridge board for 6G SAS support.
Added riser support for non-transparent bridge.
September, 2012 1.3 
Added System behavior with one Power Supply AC lost or failed.
August, 2013 1.4
Updated E5-2600 v2 processor support.
Updated Post Code LED decoder.
Updated POST Error Messages and Handling.
November, 2013 1.5 
Updated chassis air flow specification.
May, 2014 1.6
Updated 5.3 title
Added 5.4 for SAS Support option 2
Intel order number: G52418-006 Revision 1.6
ii

Intel® Server System H2000WP Family TPS Disclaimers
Disclaimers
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO LICENSE,
EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS
GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL'S TERMS AND CONDITIONS OF SALE FOR
SUCH PRODUCTS, INTEL ASSUMES NO LIABILITY WHATSOEVER AND INTEL DISCLAIMS ANY EXPRESS OR
IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL PRODUCTS INCLUDING LIABILITY OR
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR
INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
A "Mission Critical Application" is any application in which failure of the Intel Product could result, directly or indirectly,
in personal injury or death. SHOULD YOU PURCHASE OR USE INTEL'S PRODUCTS FOR ANY SUCH MISSION
CRITICAL APPLICATION, YOU SHALL INDEMNIFY AND HOLD INTEL AND ITS SUBSIDIARIES,
SUBCONTRACTORS AND AFFILIATES, AND THE DIRECTORS, OFFICERS, AND EMPLOYEES OF EACH,
HARMLESS AGAINST ALL CLAIMS COSTS, DAMAGES, AND EXPENSES AND REASONABLE ATTORNEYS'
FEES ARISING OUT OF, DIRECTLY OR INDIRECTLY, ANY CLAIM OF PRODUCT LIABILITY, PERSONAL
INJURY, OR DEATH ARISING IN ANY WAY OUT OF SUCH MISSION CRITICAL APPLICATION, WHETHER OR
NOT INTEL OR ITS SUBCONTRACTOR WAS NEGLIGENT IN THE DESIGN, MANUFACTURE, OR WARNING OF
THE INTEL PRODUCT OR ANY OF ITS PARTS.
Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not
rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined". Intel reserves
these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from
future changes to them. The information here is subject to change without notice. Do not finalize a design with this
information.
The products described in this document may contain design defects or errors known as errata which may cause the
product to deviate from published specifications. Current characterized errata are available on request.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your
product order.
Copies of documents which have an order number and are referenced in this document, or other Intel literature, may
be obtained by calling 1-800-548-4725, or go to: http://www.intel.com/design/literature.
Intel and Xeon are trademarks of Intel Corporation in the U.S. and/or other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2014 Intel Corporation. All rights reserved.
Revision 1.6 Intel order number: G52418-006
iii

Table of Contents Intel® Server System H2000WP Family TPS
Table of Contents
1. Introduction ........................................................................................................................1
1.1 Chapter Outline......................................................................................................1
1.2 Server Board Use Disclaimer.................................................................................2
2. Product Overview...............................................................................................................3
2.1 System Views.........................................................................................................5
2.2 System Dimensions................................................................................................5
2.3 System Level Environmental Limits........................................................................6
2.3.1 High Temperature Ambience (HTA) Support..........................................................7
2.3.2 Set Throttling Mode..............................................................................................10
2.3.3 Altitude.................................................................................................................11
2.3.4 Set Fan Profile .....................................................................................................11
2.3.5 Fan PWM Offset...................................................................................................11
2.3.6 Quiet Fan Idle Mode.............................................................................................11
2.3.7 Thermal Sensor Input for Fan Speed Control.......................................................11
2.4 Hard Drive and Peripheral Bays...........................................................................12
2.5 Server Board Overview........................................................................................13
2.6 Front Bezel Support .............................................................................................16
2.7 Rack and Cabinet Mounting Options....................................................................16
3. Power Sub-System...........................................................................................................17
3.1 Mechanical Overview...........................................................................................17
3.1.1 AC Power Supply Unit Dimension Overview ........................................................17
3.1.2 AC Power Supply Unit General Data....................................................................17
3.1.3 AC input connector...............................................................................................18
3.1.4 AC Power Cord Specification Requirements ........................................................18
3.1.5 Power Supply Unit DC Output Connector.............................................................18
3.1.6 Handle Retention .................................................................................................19
3.1.7 LED Marking and Identification.............................................................................19
3.1.8 Power Cage with Power Distribution Board..........................................................19
3.1.9 Power Cage Output Pin Assignment....................................................................20
3.2 AC Input Specification..........................................................................................22
3.2.1 Input Voltage and Frequency ...............................................................................22
3.2.2 AC input Power Factor.........................................................................................22
3.2.3 Efficiency..............................................................................................................22
3.2.4 AC Line Fuse .......................................................................................................23
3.2.5 AC Line Inrush .....................................................................................................23
3.2.6 AC Line Dropout/Holdup ......................................................................................23
3.2.7 AC Line Fast Transient (EFT) Specification..........................................................23
3.2.8 Hot Plug...............................................................................................................24
3.2.9 Susceptibility Requirements.................................................................................24
Intel order number: G52418-006 Revision 1.6
iv

Intel®Server System H2000WP Family TPS Table of Contents
3.2.10 ElectroStatic Discharge Susceptibility ..................................................................24
3.2.11 Fast Transient/Burst.............................................................................................24
3.2.12 Radiated Immunity...............................................................................................24
3.2.13 Surge Immunity....................................................................................................24
3.2.14 AC Line Transient Specification ...........................................................................25
3.2.15 Power recovery....................................................................................................25
3.2.16 Voltage Interruptions............................................................................................25
3.2.17 AC Line Isolation..................................................................................................25
3.2.18 AC Power Inlet.....................................................................................................25
3.3 DC Output Specification.......................................................................................26
3.3.1 Output Power/Currents.........................................................................................26
3.3.2Standby Output....................................................................................................26
3.3.3 Voltage Regulation...............................................................................................26
3.3.4 Dynamic Loading .................................................................................................27
3.3.5 Capacitive Loading...............................................................................................27
3.3.6 Ripple/Noise.........................................................................................................27
3.3.7 Grounding............................................................................................................27
3.3.8 Closed Loop Stability............................................................................................28
3.3.9 Residual Voltage Immunity in Standby Mode .......................................................28
3.3.10 Common Mode Noise...........................................................................................28
3.3.11 Soft Starting .........................................................................................................28
3.3.12 Zero Load Stability Requirement..........................................................................28
3.3.13 Hot Swap Requirement........................................................................................28
3.3.14 Forced Load Sharing............................................................................................29
3.3.15 Timing Requirement.............................................................................................29
3.4 Power Supply Cold Redundancy Support.............................................................30
3.4.1 1200W CRPS Cold Redundancy..........................................................................31
3.4.2 1600W CRPS Cold Redundancy..........................................................................31
3.4.3 System behavior with one Power Supply AC lost or failed....................................31
3.5 Control And Indicator Functions ...........................................................................31
3.5.1 PSON# Input Signal.............................................................................................32
3.5.2 PWOK (power good) Output Signal......................................................................32
3.5.3 SMBAlert# Signal.................................................................................................32
3.6 Protection circuits.................................................................................................33
3.6.1 Current Limit (OCP)..............................................................................................33
3.6.2 Over Voltage Protection (OVP) ............................................................................33
3.6.3 Over Thermal protection.......................................................................................33
3.7 PMBus*................................................................................................................34
3.7.1 PSU Address Lines A0.........................................................................................34
3.7.2 Accuracy..............................................................................................................35
3.8 Power Management Policy...................................................................................35
Revision 1.6 Intel order number: G52418-006
v

Table of Contents Intel® Server System H2000WP Family TPS
4. Cooling Sub-System.........................................................................................................36
4.1 Processor Heatsink..............................................................................................36
4.2 Node cooling Fans...............................................................................................37
4.3 Power Supply Fan................................................................................................39
4.4 Air Duct Module....................................................................................................39
4.5 Drive Bay Population Requirement.......................................................................39
5. System Boards in the Node Tray.....................................................................................41
5.1 Node Docking Board............................................................................................41
5.1.1 Overview of Node Docking Board.........................................................................41
5.1.2 Pinout definition on Node Docking Board.............................................................42
5.2 Bridge Board........................................................................................................43
5.2.1 Overview of Bridge Board ....................................................................................43
5.2.2 Pinout definition on Bridge Board.........................................................................44
5.3 6Gbs SAS Support Option 1.................................................................................46
5.3.1 Overview of Bridge Board ....................................................................................46
5.3.2 Pinout definition on SAS 6Gbs Bridge Board........................................................48
5.4 6Gbs SAS Support Option 2.................................................................................49
5.4.1 Bridge Board........................................................................................................49
5.4.2 Riser Card............................................................................................................51
5.4.3 SAS Controller Module.........................................................................................53
6. Hard Disk Drive Support..................................................................................................55
6.1 Hard Disk Drive Bays scheme..............................................................................55
6.2 Hard Drive Carrier................................................................................................56
6.3 Hot Swap Hard Drive Support..............................................................................56
6.3.1 Backplane Feature set: ........................................................................................57
6.3.2 Backplane Block Diagram ....................................................................................58
6.3.3 3.5” Hot Swap Backplane Connector scheme ......................................................58
6.3.4 2.5" Hot Swap Backplane Connector scheme......................................................59
6.3.5 Backplane LED Support.......................................................................................61
6.3.6 Backplane Connector Definition ...........................................................................61
7. Front Panel Control and Indicators.................................................................................65
7.1 Control Panel Button............................................................................................66
7.2 Control Panel LED Indicators...............................................................................66
7.2.1 Power/Sleep LED.................................................................................................67
7.2.2 System Status LED..............................................................................................67
7.2.3 System Status LED – BMC Initialization...............................................................68
8. Configuration Jumpers....................................................................................................69
8.1 Force Integrated BMC Update (J6B1) ..................................................................70
8.2 Force ME Update (J1E2)......................................................................................71
8.3 Password Clear (J1E3) ........................................................................................71
8.4 BIOS Recovery Mode (J1E1)...............................................................................72
Intel order number: G52418-006 Revision 1.6
vi

Intel®Server System H2000WP Family TPS Table of Contents
8.5 Reset BIOS Settings (J1D5).................................................................................73
9. PCI Express* Riser Card and Assembly .........................................................................75
9.1 PCI Express* Riser for Slot 1 ...............................................................................75
9.1.1 Overview of PCI-Express Riser............................................................................75
9.1.2 Pinout definition on Slot 1 Riser ...........................................................................75
9.2 PCI Express* Riser with IOM Carrier for Slot 2 (Optional) ....................................79
9.2.1 Overview of PCI-E Riser with IOM Carrier............................................................79
9.2.2 Pinout definition on Slot 2 Riser and IOM Carrier.................................................81
Appendix A: Integration and Usage Tips ..............................................................................87
Appendix B: POST Code LED Decoder.................................................................................88
Appendix C: Video POST Code Errors..................................................................................94
Glossary ................................................................................................................................100
Reference Documents..........................................................................................................103
Revision 1.6 Intel order number: G52418-006
vii

List of Figures Intel® Server System H2000WP Family TPS
List of Figures
Figure 1. System Overview (Air Duct is removed).......................................................................5
Figure 2. Compute Node Scheme (Rear View) ...........................................................................5
Figure 3. Fan Speed Control Structure......................................................................................12
Figure 4. Intel®Server System H2312WP Drive Bay Overview.................................................13
Figure 5. Intel®Server System H2216WP Drive Bay Overview.................................................13
Figure 6. Intel®Server Board S2600WP....................................................................................13
Figure 7. Intel®Server Board S2600WPQ/F Components.........................................................14
Figure 8. Back Panel Feature Overview....................................................................................14
Figure 9. Light-Guided Diagnostic LED Locations.....................................................................15
Figure 10. System Bezel Front View.........................................................................................16
Figure 11. AC Power Supply Unit Dimension Overview ............................................................17
Figure 12. Power Cage Overview..............................................................................................20
Figure 13. Power distribution board...........................................................................................21
Figure 14. AC Power Cord Specification...................................................................................26
Figure 15. Turn On/Off Timing (Power Supply Signals).............................................................30
Figure 16. Power Supply Device Address.................................................................................34
Figure 17. PMBus* Monitoring Accuracy...................................................................................35
Figure 18. Processor Heatsink Overview ..................................................................................37
Figure 19. Node Fan Set and power/control Connection...........................................................38
Figure 20. Compute Node Air Duct ...........................................................................................39
Figure 21. Compute Node Tray Overview.................................................................................41
Figure 22. Node Docking Board................................................................................................41
Figure 23. Bridge Board Overview ............................................................................................43
Figure 24. Connectors on Bridge Board....................................................................................44
Figure 25. SAS 6Gbs Bridge Board Overview...........................................................................47
Figure 26. Connectors and components on Spare Bridge Board...............................................48
Figure 27. Overview of the Bridge Board...................................................................................50
Figure 28. Connectors on the Bridge Board..............................................................................50
Figure 29. Overview of the Riser Card......................................................................................51
Figure 30. SAS Controller Module Overview.............................................................................54
Figure 31. HDD Scheme for H2312WPGR................................................................................55
Figure 32. HDD Scheme for H2216WPGR................................................................................55
Figure 33. 3.5-inch HDD Assembly Overview ...........................................................................56
Figure 34. 2.5-inch HDD Assembly Overview ...........................................................................56
Figure 35. Passive Backplane Block Diagram (for one node)....................................................58
Figure 36. 3.5" Backplane Component and Connectors (Front View)........................................58
Figure 37. 3.5" Backplane Component and Connectors (Back View)........................................59
Figure 38. 2.5" Backplane Component and Connectors (Front View)........................................60
Figure 39. 2.5" Backplane Component and Connectors (Back View)........................................60
Intel order number: G52418-006 Revision 1.6
viii

Intel®Server System H2000WP Family TPS List of Figures
Figure 40. Hard Drive Carrier LED............................................................................................61
Figure 41. Front Control Panel..................................................................................................65
Figure 42. Jumper Locations and Functions..............................................................................69
Figure 43. PCI Express* Riser for Riser Slot 1..........................................................................75
Figure 44. PCI Express* Riser with bracket for Riser Slot 2 ......................................................80
Figure 45. IOM Carrier..............................................................................................................80
Figure 46. Diagnostic LED location...........................................................................................88
Revision 1.6 Intel order number: G52418-006
ix

List of Tables Intel® Server System H2000WP Family TPS
List of Tables
Table 1. System Feature Set.......................................................................................................3
Table 2. System SKU matrix.......................................................................................................4
Table 3. Chassis Dimension (SKU: H2312WPJR).......................................................................5
Table 4. Chassis Dimension (SKU: H2216WPJR).......................................................................6
Table 5. System Environmental Limits Summary........................................................................6
Table 6. Ambient Temperature Versus System Configuration.....................................................9
Table 7. Intel®Server System H2312WP and H2216WP Drive Support Matrix.........................12
Table 8. Specification Data for AC Power Supply Unit ..............................................................18
Table 9. AC power cord specification........................................................................................18
Table 10. DC Output Power Connector.....................................................................................18
Table 11. Power Supply Status LED.........................................................................................19
Table 12. Pin assignment of power output connector................................................................21
Table 13. Pin assignment of control signal connector................................................................21
Table 14. AC input rating. .........................................................................................................22
Table 15. Typical power factor..................................................................................................22
Table 16. Platinum Efficiency Requirement...............................................................................23
Table 17. AC Power Holdup Reuqirement.................................................................................23
Table 18. Performance Criteria .................................................................................................24
Table 19. AC Line Sag Transient Performance.........................................................................25
Table 20. AC Line Surge Transient Performance......................................................................25
Table 21. Load Ratings for single power supply unit .................................................................26
Table 22. Voltage Regulation Limits..........................................................................................26
Table 23. Transient Load Requirements ...................................................................................27
Table 24. Capacitive Loading Conditions..................................................................................27
Table 25. Ripple and Noise.......................................................................................................27
Table 26. Timing Requirement..................................................................................................29
Table 27. 1200W CRPS Cold Redundancy Threshold..............................................................31
Table 28. 1600W CRPS Cold Redundancy Threshold..............................................................31
Table 29. System behavior with one Power Supply AC lost or failed.........................................31
Table 30. PSON# Signal Characteristics...................................................................................32
Table 31. PWOK Signal Characteristics....................................................................................32
Table 32. SMBAlert# Signal Characteristics..............................................................................33
Table 33. Over Current Protection.............................................................................................33
Table 34. Over Voltage Protection (OVP) Limits .......................................................................33
Table 35. PSU addressing ........................................................................................................34
Table 36. PMBus* Accuracy......................................................................................................35
Table 37. 8-pin Connector Pin-Out for Node Dual Rotor Fans...................................................39
Table 38. Main Power Input Connector.....................................................................................42
Table 39. Fan Control Signal Connector ...................................................................................42
Intel order number: G52418-006 Revision 1.6
x