Intel S7000FC4UR - Server System - 0 MB RAM User manual

Intel® Server System S7000FC4UR
Power Cord Enabling Specification
Revision 1.0
January, 2007
Enterprise Platforms and Services Division - Marketing

Intel® Server System S7000FC4UR Power Supply Specification
Revision 1.0
ii
Revision History
Date Revision
Number
Modifications
January, 2007 1.0 Initial release.
Disclaimers
Information in this document is provided in connection with Intel®products. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any
express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make
changes to specifications and product descriptions at any time, without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or
"undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or
incompatibilities arising from future changes to them.
The Intel® Server System S7000FC4UR may contain design defects or errors known as errata which may cause the
product to deviate from published specifications. Current characterized errata are available on request.
Intel, Pentium, Itanium, and Xeon are trademarks or registered trademarks of Intel Corporation.
*Other brands and names may be claimed as the property of others.
Copyright © Intel Corporation 2007. All rights reserved.

Revision 1.0
iii
Table of Contents
1. Introduction ..........................................................................................................................1
2. Power Cord Specifications..................................................................................................1
2.1 1570 Watt Power Supply Specifications..................................................................1
2.2 Cord and Service.....................................................................................................2
3. Power Supply Cordsets.......................................................................................................2
3.1 North American Power Supply Cordsets .................................................................2
3.2 European Power Supply Cordsets...........................................................................4
3.3 Chinese Power Supply Cordsets.............................................................................6
3.4 United Kingdom Power Supply Cordsets.................................................................8

Intel® Server System S7000FC4UR Power Supply Specification
Revision 1.0
iv
< This page intentionally left blank. >

Revision 1.0
1
1. Introduction
This document helps customers procure power cords for the Intel®Server System
S7000FC4UR.
This information is available for each power cord by geographical region:
Component description and function
Part numbers and revision levels
Vendor contact information
2. Power Cord Specifications
The Intel®Server System S7000FC4UR does not include power cordsets for the two 1570-watt
power supplies because of the unique requirements and differing AC services in regions where
the system may be shipped.
The maximum input/output power expectations of the server system are:
System power input: 80% efficiency at 90-240 VAC
System power output: 1570 Watt
2.1 1570 Watt Power Supply Specifications
The AC input specifications of the 1570-watt power supply are:
Parameter Minimum Nominal Maximum Unit
Input Voltage (Low Line) 90 100-127 140 VACrms
Input Voltage (High Line) 180 200-240 264 VACrms
Input Current(90VAC) 14.4 Arms
Input Current(103.5VAC) 14.4 Arms
Input Current(180VAC) 11.1 Arms
The AC inlet connector is an IEC320 C14 receptacle (rated for 15A, 250VAC).

Intel® Server System S7000FC4UR Power Supply Specification
Revision 1.0
2
2.2 Cord and Service
The following criteria should be used for the wire cord and AC service selection for the Intel®
Server System S7000FC4UR. Verified your selection for the safety requirements of each
application with a certified safety and regulatory professional.
In North America, the cord must be UL Listed/CSA Certified, 16/3, type SJT/SO, with
NEMA 6-15P or equivalent attachment plug and IEC 320 C13 plug outlet.
Outside of North America, the cord must be flexible VDE certified or HAR rated 250V, 3
x 1mm minimum conductor size with IEC 320 C13 outlet, and rated for no less than the
product ratings. The AC wall attachment plug shall be a three conductor grounding type,
rated at 125% of the total input current rating and must be for the configuration of the
specific region or country. The AC wall attachment plug must bear at least an accepted
safety agency certification mark for the specific region or country.
The cord must be no longer than 4.5 meters (14.76 feet).
Do not attempt to modify or use an AC power cord that is not the exact type required.
3. Power Supply Cordsets
The vendor information below helps you identify a supplier for a suitable power cordset. The
selections are assembled cordsets, not raw parts. Check your power source electrical outlets to
determine suitability and verify the safety requirements of each application with a certified safety
and regulatory professional.
3.1 North American Power Supply Cordsets
Table 1. Interpower Corporation North American Cordset
Part Number 86221590
Contact Telephone Number 1-800-662-2290
Vendor Website http://www.interpower.com/
Equipment End IEC 60320 C13
Supply End NEMA 5-15
Current Rating 15 A
Voltage Rating 125 VAC
Length 2.5 meters

Revision 1.0
3
Table 2. Quail Electronics North American Cordset
Part Number 5041.072
Contact Telephone Number 1-925-373-6700
Vendor Website http://www.quail.com/
Equipment End IEC 60320 C13
Supply End NEMA6-15P
Current Rating 15 A
Voltage Rating 125 VAC
Length 6 feet

Intel® Server System S7000FC4UR Power Supply Specification
Revision 1.0
4
3.2 European Power Supply Cordsets
Table 3. Interpower Corporation Continental Europe Cordset
Part Number 86231530
Contact Telephone Number 44 (0) 1908 327700
Vendor Website http://www.interpower.com/
Equipment End IEC 60320 C13
Supply End CEE 7/7
Current Rating 10 A
Voltage Rating 250 VAC
Length 3.5 meters

Revision 1.0
5
Table 4. Quail Electronics Continental Europe Cordset
Part Number 8500.098
Contact Telephone Number 011-1-800-669-8090
Vendor Website http://www.quail.com/
Equipment End IEC 60320 C13
Supply End CEE 7/7 (Schuko)
Current Rating 10 A
Voltage Rating 250 VAC
Length 2.5 meters

Intel® Server System S7000FC4UR Power Supply Specification
Revision 1.0
6
3.3 Chinese Power Supply Cordsets
Table 5. Interpower Corporation Chinese Cordset
Part Number 86517040
Contact Telephone Number 44 (0) 1908 327700
Vendor Website http://www.interpower.com/
Equipment End IEC 60320 C13
Supply End GB 2099-1-1996
Current Rating 10 A
Voltage Rating 250 VAC
Length 2.5 meters