Intel SC5650BCDP Configuration guide

Intel®Server System SR1630BC
Technical Product Specification
Intel order number E44588-005
Revision 1.5
March 2010
Enterprise Platforms and Services Division - Marketing

Revision History Intel® Server System SR1630BC TPS
Intel order number E44588-005 Revision 1.5
ii
Revision History
Date Revision
Number
Modifications
January 2009 1.0 Initial Release
March 2009 1.1 Updated system feature set table
April 2009 1.2 Updated Appendix B: POST Code Diagnostic LED Decoder according to BIOS
EPS.
Updated Appendix C: POST Error Messages and Handling according to BIOS
EPS.
Updated “System Status LED Indicator States Table”.
Removed AXXHERAL option from “Rack and Cabinet Mounting Options”
section.
Removed S4 state option from the “Power / Sleep LED” section.
Updated cable length in the “Cable Harness Definition” table.
May 2009 1.3 Updated memory description in “Table 1: System Feature Set”.
January 2010 1.4 Remove S3 state option from the “Power/Sleep LED” section”
Add one Note about management feature is not supported.
March 2010 1.5 Adding support for Intel® Xeon® processors 5600 series

Intel® Server System SR1630BC TPS Disclaimers
Revision 1.5 Intel order number E44588-005
iii
Disclaimers
Information in this document is provided in connection with Intel®products. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any
express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make
changes to specifications and product descriptions at any time, without notice.
Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or
"undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or
incompatibilities arising from future changes to them.
This document contains information on products in the design phase of development. Do not finalize a design with
this information. Revised information will be published when the product is available. Verify with your local sales office
that you have the latest datasheet before finalizing a design.
The server boards / systems referenced in this document may contain design defects or errors known as errata which
may cause the product to deviate from published specifications. Current characterized errata are available on
request.
Intel, Pentium, Itanium, and Xeon are trademarks or registered trademarks of Intel Corporation.
*Other brands and names may be claimed as the property of others.
Copyright © Intel Corporation 2010. All rights reserved.

Table of Contents Intel® Server System SR1630BC TPS
Intel order number E44588-005 Revision 1.5
iv
Table of Contents
1. Introduction.............................................................................................................................1
1.1 Chapter Outline .........................................................................................................1
1.2 Server System Use Disclaimer................................................................................1
2. Product Overview....................................................................................................................2
2.1 System Views ...........................................................................................................4
2.2 System Dimensions ...................................................................................................4
2.3 System Components..................................................................................................5
2.4 Hard Drive and Peripheral Bays..................................................................................7
2.5 Server Board Overview .............................................................................................8
2.5.1 Server Board Connector and Component Layout....................................................9
2.5.2 Intel®Light-Guided Diagnostic LED Locations.......................................................10
2.5.3 Riser Card..............................................................................................................11
2.6 Rack and Cabinet Mounting Options .........................................................................11
3. Power Sub-System ................................................................................................................12
3.1 Mechanical Overview...............................................................................................12
3.2 Output Connectors ..................................................................................................14
3.2.1 P1 – Main Power Connector .....................................................................................14
3.2.2 P2 – Processor/DDR3 Power Connector ...................................................................14
3.2.3 P3 – Power Signal Connector ...................................................................................15
3.2.4 P4 and P5 – SATA Hard Drive Power Connectors......................................................15
3.2.5 P6 – Slim-line SATA Optical Disk Drive Power Connector...........................................16
3.3 Efficiency ................................................................................................................16
3.4 AC Input Voltage Requirement.................................................................................16
3.5 Protection Circuits...................................................................................................17
3.5.1 Over-current Protection (OCP) .................................................................................17
3.5.2 Over-voltage Protection (OVP).................................................................................17
3.5.3 Over-temperature Protection (OTP).........................................................................18
3.6 AC Power Cord Specification Requirements..............................................................18
4. Cooling Sub-System ...............................................................................................................19
4.1.1 System Fan Connectors ...........................................................................................20
4.2 Power Supply Fans..................................................................................................21

Intel® Server System SR1630BC TPS Table of Contents
Revision 1.5 Intel order number E44588-005
v
4.3 Processor Air Duct and Air Baffle .............................................................................21
5. Peripheral and Hard Drive Support.........................................................................................22
5.1 Optical Drive Support...............................................................................................23
5.2 Hard Disk Drive Support ..........................................................................................23
6. Front Control Panel................................................................................................................24
6.1.1 Power / Sleep LED...................................................................................................25
6.1.2 System Status LED..................................................................................................25
6.1.3 Drive Activity LED ...................................................................................................26
7. PCI Riser Cards and Assembly ................................................................................................27
8. Environmental and Regulatory Specifications.........................................................................28
8.1 System Level Environmental Limits..........................................................................28
8.2 Serviceability and Availability...................................................................................28
8.3 Replacing the CMOS Battery ....................................................................................29
8.4 Product Regulatory Compliance ...............................................................................30
8.5 Use of Specified Regulated Components ..................................................................30
8.6 Electromagnetic Compatibility Notices .....................................................................33
8.6.1 USA ........................................................................................................................33
8.6.2 FCC Verification Statement......................................................................................34
8.6.3 ICES-003 (Canada)...................................................................................................34
8.6.4 Europe (CE Declaration of Conformity) .....................................................................34
8.6.5 Japan EMC Compatibility...........................................................................................34
8.6.6 BSMI (Taiwan) .........................................................................................................34
8.6.7 RRL (Korea).............................................................................................................35
8.6.8 CNCA (CCC-China) ....................................................................................................35
8.7 Product Ecology Compliance ....................................................................................35
8.8 Other Markings........................................................................................................38
Appendix A: Integration and Usage Tips .......................................................................................39
Appendix B: POST Code Diagnostic LED Decoder...........................................................................40
Appendix C: POST Error Messages and Handling ...........................................................................44
Glossary.......................................................................................................................................49
Reference Documents..................................................................................................................50

List of Figures Intel® Server System SR1630BC TPS
Intel order number E44588-005 Revision 1.5
vi
List of Figures
Figure 1. Intel®Server System SR1630BC...................................................................................4
Figure 2. Major System Components – Intel®Server System SR1630BC ...................................5
Figure 3. Back Panel Features .....................................................................................................6
Figure 4. Drive Bays – Intel®Server System SR1630BC .............................................................7
Figure 5. Intel®Server Board S5500BC picture............................................................................8
Figure 6. Intel®Server Board S5500BC Layout............................................................................9
Figure 7. Intel®Light-Guided Diagnostic LED Locations.............................................................10
Figure 8. Overview of power Supply...........................................................................................12
Figure 9. Power Supply Mechanical Drawing.............................................................................13
Figure 10. AC Power Cord Drawing............................................................................................18
Figure 11. Fan Module Assembly – Intel®Server System SR1630BC.......................................19
Figure 12. Air Duct for the Intel®Server System SR1630BC......................................................21
Figure 13. Peripheral Location....................................................................................................22
Figure 14. Front Control Panel – Intel®Server System SR1630BC............................................24
Figure 15. PCI Riser Card Assembly..........................................................................................27
Figure 16. Diagnostic LED Placement Diagram .........................................................................40

Intel® Server System SR1630BC TPS List of Tables
Revision 1.5 Intel order number E44588-005
vii
List of Tables
Updated memory description in “Table 1: System Feature Set”................................................... ii
Table 1. System Feature Set........................................................................................................2
Table 2. Intel®Server System SR1630BC Dimensions................................................................4
Table 3. Board Layout reference ..................................................................................................9
Table 4. Intel®Light-Guided Diagnostic LED reference..............................................................11
Table 5. Cable Harness Definition..............................................................................................14
Table 6. P1 – Main Power Connector Pin-out.............................................................................14
Table 7. P2 – Processor/DDR3 Power Connector Pin-out .........................................................15
Table 8. P3 –Power Signal Connector Pin-out............................................................................15
Table 9. P4 and P5 – SATA Hard Drive Power Connector Pin-out.............................................15
Table 10. P6 – Slim-line SATA Optical Disk Drive Power Connector Pin-out.............................16
Table 11. Power Supply Efficiency .............................................................................................16
Table 12. AC Input Rating...........................................................................................................16
Table 13. Over-current Protection (OCP) ...................................................................................17
Table 14. Over-Voltage Protection (OVP) Limits ........................................................................17
Table 15. Cooling Zones.............................................................................................................20
Table 16. System Fan Connector Pin-outs.................................................................................20
Table 17. Control Panel LED Functions......................................................................................24
Table 18. SSI Power LED Operation..........................................................................................25
Table 19. System Status LED Indicator States...........................................................................25
Table 20. System Environmental Limits Summary .....................................................................28
Table 21. System Maintenance Procedure Times......................................................................29
Table 22. Product Safety & Electromagnetic (EMC) Compliance...............................................31
Table 23. Product Ecology Compliance Reference Table..........................................................36
Table 24. POST Progress Code LED Example ..........................................................................40
Table 25. Diagnostic LED POST Code Decoder........................................................................41
Table 26. SEL Format for POST Error Messages ......................................................................44
Table 27. POST Error Messages and Handling..........................................................................44
Table 29. POST Error Beep Codes ............................................................................................47

Introduction Intel® Server System SR1630BC TPS
Revision 1.5 Intel order number E44588-005
1
1. Introduction
This Technical Product Specification (TPS) provides system specific information detailing the
features, functionality, and high level architecture of the Intel®Server System SR1630BC. You
should also reference the Intel®Server Board S5500BC Technical Product Specification more
details regarding the functionality and architecture specific to the integrated server board and
what is supported in this server system.
The Intel®Server System SR1630BC may contain design defects or errors known as errata
which may cause the product to deviate from published specifications. Refer to the Intel®
Server Board S5500BC/ Intel®Server System SR1630BC Specification Update for published
errata.
1.1 Chapter Outline
This document is divided into the following chapters:
Chapter 1 – Introduction
Chapter 2 – Product Overview
Chapter 3 – Power Sub-System
Chapter 4 – Cooling Sub-System
Chapter 5 – Peripheral and Drive Support
Chapter 6 – Front Control Panel
Chapter 7 – PCI Riser Card and Assembly
Chapter 8 – Environmental and Regulatory Specifications
Appendix A – Integration and Usage Tips
Appendix B – POST Code Diagnostic LED Decoder
Appendix C – Post Error Message and Handling
Glossary
Reference Documents
1.2 Server System Use Disclaimer
Intel®Server Systems support add-in peripherals and contain a number of high-density VLSI
and power delivery components that need adequate airflow to cool. Intel ensures through its
own chassis development and testing that when Intel server building blocks are used together,
the fully integrated system will meet the intended thermal requirements of supported
components. It is the responsibility of the system integrator who chooses not to use Intel
developed server building blocks to consult vendor datasheets and operating parameters to
determine the amount of air flow required for their specific application and environmental
conditions. Intel Corporation cannot be held responsible if components fail or the server system
does not operate correctly when used outside any of their published operating or non-operating
limits.

Intel® Server System SR1630BC TPS Product Overview
Intel order number E44588-005 Revision 1.5
2
2. Product Overview
The Intel®Server System SR1630BC is a 1U server system designed to support the Intel®
Server Board S5500BC. The server board and the system have features designed to support
the high-density server market. This chapter provides a high-level overview of the system
features. Greater detail for each major system component or feature is provided in the following
chapters.
Table 1. System Feature Set
Feature Description
Dimensions • 1.7 inches (43.3 mm) high
• 16.9 inches (430 mm) wide
• 20 inches (508 mm) deep
• 22 pounds (10 kg) weight
Server Board Intel®Server Board S5500BC
Processor LGA 1366 sockets supporting up to two Intel®Xeon®processor 5500 series and 5600 series
with Intel®QuickPath Interconnect (QPI) and Integrated Memory controllers.
•Supports up to 95 W Thermal Design Power (TDP)
•4.8 GT/s, 5.86 GT/s, and 6.4 GT/s Intel®QuickPath Interconnect (Intel®QPI)
•EVRD11.1
For a complete list of supported processors, see:
http://support.intel.com/support/motherboards/server/s5500bc/compat.htm
Memory Eight DDR3 DIMM slots supporting up to 32 GB of DDR3 800/166/1333 MT/s ECC Registered
(RDIMM), or ECC Unbuffered (UDIMM) DDR3 memory
• Four slots support CPU_1 and four slots support CPU_2.
NOTE: Mixed memory is not tested or supported. Non-ECC memory is not tested and is not
recommended for use in a server environment
Chipset • Intel®I/O Hub (IOH) 5500 chipset
• Intel®82801Jx I/O Controller Hub 10 Raid (ICH10R)
• ServerEngines* LLC Pilot II BMC controller (Integrated BMC)
Peripheral Interfaces External connections:
•DB-15 video connector (back)
•RJ-45 serial Port A connector
•Two RJ-45 10/100/1000 Mb network connections
•Four USB 2.0 connectors (back)
•One USB 2.0 connector (front)
Internal connections:
•Two USB 2x5 pin header, each supports two USB 2.0 ports
•One DH-10 Serial Port B header
•Six Serial ATA (SATA) II connectors
•One SSI-EEB compliant front panel header
•One SSI-EEB compliant 24-pin main power connector
•One SSI-compliant 8-pin CPU power connector
•One SSI-compliant 5-pin auxiliary power connector
•One 4-Pin SGPIO connector