Intel SSR212CC User manual

Intel® Storage System SSR212CC User
Guide
A Guide for Technically Qualified Assemblers of Intel®Identified Subassemblies/
Products
Intel Order Number D55418-002

ii Intel® Storage System SSR212CC User Guide
Disclaimer
Information in this document is provided in connection with Intel® products. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's
Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any
express or implied warranty, relating to sale and/or use of Intel® products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property
right. Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining
applications or for any other application in which the failure of the Intel product could create a situation where
personal injury or death may occur. Intel may make changes to specifications and product descriptions at any time,
without notice.
Intel® server boards contain a number of high-density VLSI and power delivery components that need adequate
airflow for cooling. Intel's own chassis are designed and tested to meet the intended thermal requirements of these
components when the fully integrated system is used together. It is the responsibility of the system integrator that
chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to
determine the amount of airflow required for their specific application and environmental conditions. Intel
Corporation can not be held responsible if components fail or the server board does not operate correctly when used
outside any of their published operating or non-operating limits.
Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in
the United States and other countries.
* Other names and brands may be claimed as the property of others.
Copyright © 2006, Intel Corporation. All Rights Reserved

Intel® Storage System SSR212CC User Guide iii
Safety Information
Important Safety Instructions
Read all caution and safety statements in this document before performing any of the
instructions. See also Intel Server Boards and Server Chassis Safety Information on the
Intel®Server Deployment Toolkit CD and/or at http://support.intel.com/support/
motherboards/server/sb/cs-010770.htm.
Wichtige Sicherheitshinweise
Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor
Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu
Intel-Serverplatinen und Servergehäusen auf der Intel®Server Deployment Toolkit CD
oder unter http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.
Consignes de sécurité
Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce
document avant de suivre toute instruction. Consultez Intel Server Boards and Server
Chassis Safety Information sur le Intel®Server Deployment Toolkit CD ou bien rendez-
vous sur le site http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.
Instrucciones de seguridad importantes
Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar
cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety
Information en el Intel®Server Deployment Toolkit CD y/o en http://support.intel.com/
support/motherboards/server/sb/cs-010770.htm.
重要安全指导

Safety Information
iv Intel® Storage System SSR212CC User Guide
Warnings
Heed safety instructions: Before working with your server product, whether you are
using this guide or any other resource as a reference, pay close attention to the safety
instructions. You must adhere to the assembly instructions in this guide to ensure and
maintain compliance with existing product certifications and approvals. Use only the
described, regulated components specified in this guide. Use of other products /
components will void the UL listing and other regulatory approvals of the product and
will most likely result in noncompliance with product regulations in the region(s) in which
the product is sold.
System power on/off: The power button DOES NOT turn off the system AC power. To
remove power from system, you must unplug the AC power cord from the wall outlet.
Make sure the AC power cord is unplugged before you open the chassis, add, or remove
any components.
Hazardous conditions, devices and cables: Hazardous electrical conditions may be
present on power, telephone, and communication cables. Turn off the server and
disconnect the power cord, telecommunications systems, networks, and modems attached
to the server before opening it. Otherwise, personal injury or equipment damage can
result.
Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives,
boards, and other parts. We recommend that you perform all procedures in this chapter
only at an ESD workstation. If one is not available, provide some ESD protection by
wearing an antistatic wrist strap attached to chassis ground any unpainted metal surface on
your server when handling parts.
ESD and handling boards: Always handle boards carefully. They can be extremely
sensitive to ESD. Hold boards only by their edges. After removing a board from its
protective wrapper or from the server, place the board component side up on a grounded,
static free surface. Use a conductive foam pad if available but not the board wrapper. Do
not slide board over any surface.
Installing or removing jumpers: A jumper is a small plastic encased conductor that slips
over two jumper pins. Some jumpers have a small tab on top that you can grip with your
fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a
tab, take care when using needle nosed pliers to remove or install a jumper; grip the
narrow sides of the jumper with the pliers, never the wide sides. Gripping the wide sides
can damage the contacts inside the jumper, causing intermittent problems with the
function controlled by that jumper. Take care to grip with, but not squeeze, the pliers or
other tool you use to remove a jumper, or you may bend or break the pins on the board.

Intel® Storage System SSR212CC User Guide v
Preface
About this Manual
Thank you for purchasing and using the Intel® Storage System SSR212CC.
This manual is written for system technicians who are responsible for troubleshooting,
upgrading, and repairing this storage system. This document provides a brief overview of
the features of the product, a list of accessories or other components you may need,
troubleshooting information, and instructions on how to add and replace components on
the Intel® Storage System SSR212CC. For the latest version of this manual, see http://
support.intel.com/support/motherboards/server/ssr212cc/.
Manual Organization
Chapter 1 provides a brief overview of the Intel® Storage System SSR212CC. In this
chapter, you will find a list of the storage system’s features, photos of the product, and
product diagrams to help you identify components and their locations.
Chapter 2 provides instructions on adding and replacing components. Use this chapter for
step-by-step instructions and diagrams for installing or replacing components such as the
fans, power supply, drives, and other components.
At the back of this book, you will find technical specifications, regulatory information,
safety information, "getting help" information, and warranty information.
Product Contents, Order Options, and Accessories
This storage system is compatible with the following Intel®Server Boards:
•Intel®Server Board SE7520JR2
Your Intel® Storage System SSR212CC ships with the following items:
•Intel® Storage System SSR212CC
•Attention document, in the product box
•Intel® Storage System SSR212CC Quick Start User's Guide, in the product box
•AC power cord (North America only)
•50 Phillips* head screws
•Resource CD
•Rail kit
•T10 TORX* screwdriver

Preface
vi Intel® Storage System SSR212CC User Guide
•RJ-45 serial cable
In addition, you may need or want to purchase one or more of the following accessory
items for your server:
Memory DIMMs, and hard drives.
For information about which accessories, memory, processors, and third-party hardware
have been tested and can be used with your storage system, and for ordering information
for Intel®products, see http://support.intel.com/support/motherboards/server/ssr212cc/
compat.htm.
Additional Information and Software
If you need more information about this product or information about the accessories that
can be used with this storage system, use the following resources. These files are
available at http://support.intel.com/support/motherboards/server/ssr212cc/. Unless
otherwise indicated in the following table, once on this Web page, type the document or
software name in the search field at the left side of the screen and select the option to
search "This Product."
For this information or
software Use this Document or Software
For in-depth technical
information about this
product, including BIOS
settings and chipset
information
Intel® Storage System SSR212CC Technical Product Specification
If you just received this
product and need to install
it
Intel® Storage System SSR212CC Quick Start User's Guide in the
product box
For virtual system tours
and interactive repair
information
A link to the SMaRT Tool is available under "Other Resources" at the
right side of the screen at
http://support.intel.com/support/motherboards/server/ssr212cc/
Accessories or other Intel
server products Spares and Configuration Guide
Hardware (peripheral
boards, adapter cards) and
operating systems that
have been tested with this
product
Tested HardwareOperating Systems List
To make sure your system
falls within the allowed
power budget
Power Budget Tool
For software to manage
your Intel®server Intel®Server Management Software
For diagnostics test
software Diagnostics

Contents
Intel® Storage System SSR212CC User Guide vii
Contents
Safety Information ..................................................................................................... iii
Important Safety Instructions ................................................................................................ iii
Wichtige Sicherheitshinweise ............................................................................................... iii
Consignes de sécurité .......................................................................................................... iii
Instrucciones de seguridad importantes ............................................................................... iii
Warnings............................................................................................................................... iv
Preface ......................................................................................................................... v
About this Manual .................................................................................................................. v
Manual Organization .............................................................................................................. v
Product Contents, Order Options, and Accessories .............................................................. v
Additional Information and Software ..................................................................................... vi
Storage System Features .......................................................................................... 1
The Enclosure Core Product .................................................................................................2
Enclosure Chassis .................................................................................................................4
Server Board Sub-system ......................................................................................................5
Power Supply Module ............................................................................................................5
Multiple Power Supply Modules ..................................................................................................6
Power Supply Output Cables ...................................................................................................... 7
Cooling Module ......................................................................................................................7
Drive Carrier ..........................................................................................................................8
Drive LED Indicators ................................................................................................................... 8
Blanking Plates ......................................................................................................................9
Front Panel ............................................................................................................................9
Spare Parts and Accessories ..............................................................................................10
Hardware Installations and Upgrades .................................................................... 11
Before You Begin .................................................................................................................11
Tools and Supplies Needed ......................................................................................................11
System References .................................................................................................................. 11
Planning Your Installation ....................................................................................................11
Drive Bay Numbering Convention .......................................................................................12
Installing the Enclosure in a Rack System........................................................................... 13
Rack System Precautions ......................................................................................................... 13
Rack Mount Rail Kit .................................................................................................................. 14
Removing or Installing the Enclosure Cover ........................................................................14
Removing the Enclosure Cover ................................................................................................ 14
Installing the Enclosure Cover .................................................................................................. 16
Removing or Installing a Power Supply Module ..................................................................17
Removing a Power Supply Module...................................................................................... 18

Contents
viii Intel® Storage System SSR212CC User Guide
Installing a Power Supply Module ............................................................................................ 19
Connecting the Power Cord(s)............................................................................................ 21
Grounding Checks............................................................................................................... 22
Removing or Installing the PCI Riser Assembly .................................................................. 22
Blanking Plates ......................................................................................................................... 22
Removing the PCI Riser Assembly .......................................................................................... 22
Installing the PCI Riser Assembly ............................................................................................ 25
Replacing a PCI Riser Connector Card............................................................................... 28
Removing and Installing an Intel®RAID Controller............................................................. 30
Removing an Intel®RAID Controller ........................................................................................ 30
Installing an Intel®RAID Controller .......................................................................................... 33
Replacing the Battery for an Intel®RAID Controller............................................................ 37
Installing a PCI Card ........................................................................................................... 43
Hot Swap Replacing, Removing or Installing the Cooling Module ...................................... 47
Hot Swap Replacing the Cooling Module ................................................................................. 47
Removing the Cooling Module ................................................................................................. 51
Installing the Cooling Module ................................................................................................... 54
Replacing the Fan Interposer Board ................................................................................... 57
Removing or Installing a Drive Carrier ................................................................................ 62
Planning Your Drive Carrier Configuration ............................................................................... 62
Removing a Drive Carrier ......................................................................................................... 62
Installing a Drive Carrier ........................................................................................................... 63
Removing or Installing a Hard Drive into a Drive Carrier .................................................... 65
Removing a Hard Drive from a Drive Carrier ............................................................................ 65
Installing a Hard Drive into a Drive Carrier ............................................................................... 66
Replacing an Intel® Server Board SE7520JR2 ................................................................... 67
Removing a Server Board ........................................................................................................67
Installing a Server Board .......................................................................................................... 70
Removing or Installing the Processor Air Duct.................................................................... 72
Removing the Processor Air Duct ............................................................................................ 72
Installing the Processor Air Duct ..............................................................................................73
Removing or Installing the Processor.................................................................................. 74
Removing the Processor .......................................................................................................... 74
Installing the Processor ............................................................................................................ 76
Replacing a Chassis (FXCCHASSIS) ................................................................................. 79
Replacing the Server Board Battery.................................................................................... 85
Removing or Installing Memory........................................................................................... 89
Memory Requirements ............................................................................................................. 89
Removing DIMMs ..................................................................................................................... 91
Installing DIMMs ....................................................................................................................... 93
Removing or Installing the Intel® Management Module Professional (IMM Pro) Module ... 94
Removing the IMM Pro Module ................................................................................................ 94
Installing the IMM Pro Module ..................................................................................................98
Operation .................................................................................................................103

Contents
Intel® Storage System SSR212CC User Guide ix
Before You Begin ...............................................................................................................103
Power On ...........................................................................................................................103
Power Supply Module LED ..................................................................................................... 103
Front Panel LEDs ..............................................................................................................104
Rear Panel Buttons ............................................................................................................105
Starting the Drives .............................................................................................................105
Disk Drives LEDs .................................................................................................................... 105
Power Down ......................................................................................................................105
Troubleshooting and Problem Solving ................................................................ 107
Overview ............................................................................................................................107
Initial Start-up Problems ......................................................................................................... 107
LEDs ..................................................................................................................................107
Power Supply Units ................................................................................................................ 107
Front Panel ............................................................................................................................. 108
Troubleshooting .................................................................................................................108
Power Supply Module Faults .................................................................................................. 109
Thermal Control ...................................................................................................................... 109
Thermal Alarm ........................................................................................................................ 110
Thermal Shutdown .................................................................................................................. 110
Drive Carrier Module Faults............................................................................................... 111
Blank Drive Carriers ................................................................................................................ 111
Dealing with Hardware Faults ............................................................................................111
Technical Specifications ........................................................................................ 113
Dimensions ........................................................................................................................113
Weight ................................................................................................................................113
AC Power Module (1 or 2 500-W Power Supply Units) .....................................................113
Power Supply Safety and EMC Compliance .....................................................................114
Power Cord ........................................................................................................................114
Cooling Module.................................................................................................................. 115
Environment .......................................................................................................................115
Drive Carrier Specification .................................................................................................116
A Intel®Server Board SE7520JR2 BIOS Settings .............................................. 117
B RAID Levels ........................................................................................................ 119
RAID 0 - Data Striping .......................................................................................................119
RAID 1 - Disk Mirroring / Disk Duplexing........................................................................... 120
RAID 5 - Data Striping with Striped Parity .........................................................................120
RAID 10 - Combination of RAID 1 and RAID 0 ..................................................................121
RAID 50 - Combination of RAID 5 and RAID 0.................................................................. 122
C Upgrading Component Firmware ..................................................................... 123
Upgrading Component Firmware or the Server Board BIOS .............................................123
D Safety Information ............................................................................................. 125

Contents
xIntel® Storage System SSR212CC User Guide
English ............................................................................................................................... 125
Server Safety Information ....................................................................................................... 125
Safety Warnings and Cautions ............................................................................................... 125
Intended Application Uses ......................................................................................................126
Site Selection .......................................................................................................................... 126
Equipment Handling Practices ............................................................................................... 126
Power and Electrical Warnings ............................................................................................... 126
System Access Warnings ....................................................................................................... 127
Rack Mount Warnings ............................................................................................................128
Electrostatic Discharge (ESD) ................................................................................................ 128
Other Hazards ........................................................................................................................ 129
Deutsch ............................................................................................................................. 130
Sicherheitshinweise für den Server ........................................................................................ 130
Sicherheitshinweise und Vorsichtsmaßnahmen ..................................................................... 130
Zielbenutzer der Anwendung .................................................................................................. 131
Standortauswahl ..................................................................................................................... 131
Handhabung von Geräten ...................................................................................................... 131
Warnhinweise für den Systemzugang .................................................................................... 133
Elektrostatische Entladungen (ESD) ...................................................................................... 134
Andere Gefahren .................................................................................................................... 135
Français ............................................................................................................................. 136
Consignes de sécurité sur le serveur ..................................................................................... 136
Sécurité: avertissements et mises en garde ........................................................................... 136
Domaines d’utilisation prévus ................................................................................................. 137
Sélection d’un emplacement .................................................................................................. 137
Pratiques de manipulation de l’équipement ............................................................................ 137
Décharges électrostatiques (ESD) ......................................................................................... 140
Autres risques ......................................................................................................................... 141
Español ............................................................................................................................. 142
Información de seguridad del servidor ................................................................................... 142
Advertencias y precauciones sobre seguridad ....................................................................... 142
Aplicaciones y usos previstos ................................................................................................. 143
Selección de la ubicación ....................................................................................................... 143
Manipulación del equipo ......................................................................................................... 143
Advertencias el acceso al sistema ......................................................................................... 145
Descarga electrostática (ESD) ............................................................................................... 146
E Intel®Server Issue Report Form .......................................................................153
F Getting Help ........................................................................................................157
World Wide Web ............................................................................................................... 157
Telephone ......................................................................................................................... 157
U.S. and Canada .................................................................................................................... 157
Europe .................................................................................................................................... 157
In Asia-Pacific region .............................................................................................................. 158
Japan .................................................................................................................................... 158
Latin America .......................................................................................................................... 158

Contents
Intel® Storage System SSR212CC User Guide xi
G Regulatory and Compliance Information ........................................................ 161
Product Regulatory Compliance ........................................................................................161
Product Safety Compliance .................................................................................................... 161
Product EMC Compliance - Class A Compliance ................................................................... 162
Certifications / Registrations / Declarations ............................................................................ 162
Product Regulatory Compliance Markings ............................................................................. 163
Electromagnetic Compatibility Notices ..............................................................................164
FCC Verification Statement (USA) ......................................................................................... 164
Industry Canada (ICES-003) .................................................................................................. 165
Europe (CE Declaration of Conformity) .................................................................................. 165
VCCI (Japan) .......................................................................................................................... 165
BSMI (Taiwan) ........................................................................................................................ 166
Korean Compliance (RRL) ...................................................................................................... 166
Regulated Specified Components .......................................................................................... 166
End of Life / Product Recycling ..........................................................................................167
H Installation/Assembly Safety Instructions ....................................................... 169
English ...............................................................................................................................169
Deutsch ..............................................................................................................................171
Français .............................................................................................................................174
Español ..............................................................................................................................176
Italiano ...............................................................................................................................178
I Warranty ............................................................................................................... 181
Limited Warranty for Intel® Chassis Subassembly Products ............................................181
Extent of Limited Warranty ................................................................................................181
Warranty Limitations and Exclusions .................................................................................182
Limitations of Liability .............................................................................................................. 182
How to Obtain Warranty Service ............................................................................................ 182
Telephone Support ................................................................................................................. 183
Returning a Defective Product ................................................................................................ 183

Contents
xii Intel® Storage System SSR212CC User Guide

List of Figures
Intel® Storage System SSR212CC User Guide xiii
List of Figures
Figure 1. Intel® Storage System SSR212CC - Front View ........................................................ 1
Figure 2. Intel® Storage System SSR212CC - Rear View Showing Service Areas................... 2
Figure 3. Rear Isometric View.................................................................................................... 3
Figure 4. Front Isometric View ................................................................................................... 4
Figure 5. Storage System Chassis............................................................................................. 5
Figure 6. Power Supply Module ................................................................................................. 6
Figure 7. System With One Power Supply Module Fitted .......................................................... 6
Figure 8. Cooling Module ........................................................................................................... 7
Figure 9. Empty Drive Carrier..................................................................................................... 8
Figure 10. Front Panel................................................................................................................ 9
Figure 11. Drive Bay Numbering..............................................................................................12
Figure 12. Unlatching Enclosure Cover.................................................................................... 15
Figure 13. Removing Enclosure Cover ....................................................................................16
Figure 14. Installing Enclosure Cover ...................................................................................... 17
Figure 15. Unlatching a Power Supply Module ........................................................................ 18
Figure 16. Removing a Power Supply Module......................................................................... 19
Figure 17. Removing Blanking Plate........................................................................................ 20
Figure 18. Inserting Power Supply Module .............................................................................. 20
Figure 19. Connecting Power Cords ........................................................................................ 21
Figure 20. Disconnecting First SATA Cable.............................................................................23
Figure 21. Disconnecting Main Power (P1) Cable from Server Board.....................................23
Figure 22. Disconnecting Remaining Two SATA Cables......................................................... 24
Figure 23. Removing PCI Riser Assembly from Chassis......................................................... 24
Figure 24. Installing PCI Riser Assembly into Chassis ............................................................ 25
Figure 25. Connecting First Two SATA Cables........................................................................ 26
Figure 26. Connecting Main Power Cable................................................................................ 26
Figure 27. Connecting Third SATA Cable to Server Board...................................................... 27
Figure 28. Removing PCI Riser Connector Card from PCI Riser Assembly............................ 28
Figure 29. Securing PCI Riser Connector Card to PCI Riser Assembly .................................. 29
Figure 30. Disconnecting SATA Cables................................................................................... 31
Figure 31. Removing Intel®RAID Controller from PCI Riser Assembly................................... 31
Figure 32. Removing Battery Backup Unit ............................................................................... 32
Figure 33. Connecting Extended Battery Cable to Battery Backup Unit .................................. 33
Figure 34. Attaching Battery Backup Unit to Intel®RAID Controller ........................................ 34
Figure 35. Installing Intel®RAID Controller.............................................................................. 35
Figure 36. Attaching Extended Battery Cable to Battery.......................................................... 35
Figure 37. Attach SATA Cables ............................................................................................... 36
Figure 38. Disconnecting Battery Cable from New Battery Backup Unit.................................. 37
Figure 39. Detaching Battery from New Battery Backup Unit .................................................. 37
Figure 40. Removing Battery Holder from PCI Riser Assembly............................................... 38
Figure 41. Removing Old Battery from Battery Holder............................................................. 38
Figure 42. Securing New Battery to Battery Holder ................................................................. 39

List of Figures
xiv Intel® Storage System SSR212CC User Guide
Figure 43. Re-attaching Battery Holder to PCI Riser Assembly .............................................. 40
Figure 44. Detaching Bad Battery Backup Unit from Intel®RAID Controller ........................... 41
Figure 45. Disconnecting Extended Battery Cable from Battery Backup Unit ......................... 41
Figure 46. Connecting Battery Cable to New Battery Backup Unit.......................................... 42
Figure 47. Attaching New Battery Backup Unit to Intel®RAID Controller................................ 42
Figure 48. Removing PCI Riser Assembly from Chassis......................................................... 43
Figure 49. Removing PCI Slot Filler......................................................................................... 44
Figure 50. Installing PCI Card into PCI Riser Assembly.......................................................... 45
Figure 51. Installing PCI Riser Assembly into Chassis............................................................ 46
Figure 52. Accessing the Cooling Module ............................................................................... 47
Figure 53. Opening Cooling Module Latches........................................................................... 48
Figure 54. Cooling Module with Latches in Open Position ...................................................... 48
Figure 55. Unlatching Cooling Module from Chassis............................................................... 49
Figure 56. Removing Cooling Module from Chassis................................................................ 49
Figure 57. Installing the Cooling Module.................................................................................. 50
Figure 58. Latching Cooling Module into Chassis.................................................................... 50
Figure 59. Closing Enclosure Cover ........................................................................................ 51
Figure 60. Accessing the Cooling Module ............................................................................... 52
Figure 61. Unlatching Cooling Module..................................................................................... 53
Figure 62. Removing Cooling Module...................................................................................... 53
Figure 63. Accessing the Cooling Module ............................................................................... 54
Figure 64. Opening Cooling Module Latches........................................................................... 55
Figure 65. Cooling Module with Latches in Open Position ...................................................... 55
Figure 66. Inserting Cooling Module into Chassis ................................................................... 56
Figure 67. Closing Latches on Cooling Module ....................................................................... 56
Figure 68. Disconnecting IPMB Cable from Fan Interposer Board.......................................... 58
Figure 69. Removing Fan Interposer Board from Chassis....................................................... 59
Figure 70. Securing Fan Interposer Board to Chassis............................................................. 60
Figure 71. Connecting IPMB Cable to Fan Interposer Board .................................................. 61
Figure 72. Releasing Screw from Front of Drive Carrier.......................................................... 62
Figure 73. Removing Drive Carrier from Drive Bay ................................................................. 63
Figure 74. Installing Drive Carrier into Drive Bay..................................................................... 64
Figure 75. Removing Hard Drive from Drive Carrier................................................................ 65
Figure 76. Installing Hard Drive in Drive Carrier ...................................................................... 66
Figure 77. Disconnecting Cables from Server Board............................................................... 68
Figure 78. Removing Server Board from Chassis ................................................................... 69
Figure 79. Installing Server Board in Chassis.......................................................................... 70
Figure 80. Connecting Cables to Server Board ....................................................................... 71
Figure 81. Removing Processor Air Duct................................................................................. 72
Figure 82. Installing Processor Air Duct................................................................................... 73
Figure 83. Removing Heatsink................................................................................................. 75
Figure 84. Opening Socket Lever ............................................................................................ 75
Figure 85. Removing Processor .............................................................................................. 76
Figure 86. Opening Socket Lever ............................................................................................ 77
Figure 87. Inserting Processor................................................................................................. 77
Figure 88. Closing Socket Lever.............................................................................................. 78
Figure 89. Installing the Heatsink............................................................................................. 78

List of Figures
Intel® Storage System SSR212CC User Guide xv
Figure 90. Disconnecting Cables from Server Board............................................................... 80
Figure 91. Installing Server Board in Chassis .......................................................................... 81
Figure 92. Drive Bay Numbering Order.................................................................................... 81
Figure 93. Installing Server Board in Chassis .......................................................................... 82
Figure 94. Connecting Cables to Server Board........................................................................83
Figure 95. Connecting P4 Power Supply Cable to Backplane ................................................. 84
Figure 96. Drive Bay Numbering Order.................................................................................... 84
Figure 97. Removing PCI Riser Assembly from Chassis......................................................... 86
Figure 98. Removing Server Board Battery ............................................................................. 87
Figure 99. Installing PCI Riser Assembly into Chassis ............................................................ 88
Figure 100. DIMM Identification ............................................................................................... 89
Figure 101. Removing Memory................................................................................................ 92
Figure 102. Installing Memory.................................................................................................. 93
Figure 103. Removing PCI Riser Assembly from Chassis....................................................... 95
Figure 104. Removing IMM Pro Module from Server Board ....................................................96
Figure 105. Installing PCI Riser Assembly into Chassis .......................................................... 97
Figure 106. Removing PCI Riser Assembly from Chassis.......................................................99
Figure 107. Securing IMM Pro Module Stand-off to Server Board........................................... 99
Figure 108. Installing IMM Pro Module to Server Board ........................................................ 100
Figure 109. Installing PCI Riser Assembly into Chassis ........................................................ 101
Figure 110. Front Panel LEDs................................................................................................ 108
Figure 111. RAID 0 - Data Striping......................................................................................... 119
Figure 112. RAID 1 - Disk Mirroring / Disk Duplexing ............................................................120
Figure 113. RAID 5 - Data Striping with Striped Parity........................................................... 120
Figure 114. RAID 10 - Combination of RAID 1 and RAID 0................................................... 121
Figure 115. RAID 50 - Combination of RAID 5 and RAID 0................................................... 122

List of Figures
xvi Intel® Storage System SSR212CC User Guide

List of Tables
Intel® Storage System SSR212CC User Guide xvii
List of Tables
Table 1. Front Panel Descriptions............................................................................................ 10
Table 2. Spare Parts and Accessories..................................................................................... 10
Table 3. Configuration Requirements....................................................................................... 12
Table 4. DIMM Module Memory Capacity Support .................................................................. 90
Table 5. Power Supply Module LED Indicators...................................................................... 103
Table 6. Front Panel LED Indicators ......................................................................................104
Table 7. Rear Panel Button Functions ................................................................................... 105
Table 8. Front Panel LED States............................................................................................ 108
Table 9. Drive Fault LED Functions ....................................................................................... 111
Table 10. Intel® Server Board SE7520JR2 BIOS Settings.................................................... 117

List of Tables
xviii Intel® Storage System SSR212CC User Guide

Intel® Storage System SSR212CC User Guide 1
1Storage System Features
The Intel® Storage System SSR212CC is a 2U (rack space) disk drive enclosure,
currently housing twelve low-profile (1-in high), 3.5-in form factor SATA disk drives.
Figure 1 shows a front view of the Intel® Storage System SSR212CC while Figure 2
depicts a rear view with the lid removed, showing those areas accessible to service
personnel only.
Figure 1. Intel® Storage System SSR212CC - Front View
TP01828

Storage System Features
2Intel® Storage System SSR212CC User Guide
Figure 2. Intel® Storage System SSR212CC - Rear View Showing Service Areas
The Enclosure Core Product
The Intel® Storage System SSR212CC design concept is based on a sub-system together
with a set of plug-in modules and (as supplied) comprises:
•An enclosure chassis with backplane
•A server sub-system comprising:
—AnIntel
®Server Board SE7520JR2
— A PCI Riser card assembly
—TwoIntel
®RAID Controller SRCS28X cards
•A power supply cage containing one AC, 500-W plug-in power supply unit
A. Riser Card Assembly
B. Processor Air Duct
C. Server Board
D. Power Supply Cage
E. Cooling Module
TP01857
C
A
E
D
B