Intellian i3 User manual

Intellian i3/i4 Serial Number
This serial number will be required for
all troubleshooting or service calls
made regarding this product.
Notice
All Right Reserved
Intellian i3/i4®and Intellian®are the registered trademarks of Intellian
Technologies, Inc., and should not be appropriated without permission by
Intellian Technologies, Inc., and the information contained in this manual is the
property of Intellian Technologies, Inc. Any and all parts of this manual shall not
be reproduced and distributed in any form without written prior consent by
Intellian Technologies, Inc. The information contained in this manual shall be
subject to change at any time without notice due to the functional upgrade of the
product.
Copyright© Intellian Technologies, Inc.
Doc. No. I3I4-DC V100

CONTENTS
INTRODUCTION.........................................................................................1
INTRODUCTION TO INTELLIAN I3/I4 .................................................................1
FEATURES OF INTELLIAN I3/I4..........................................................................2
BASIC SYSTEM CONFIGURATION OF INTELLIAN I3/I4.......................................1
INSTALLATION...........................................................................................4
SYSTEM COMPONENTS.....................................................................................4
TOOLS REQUIRED FOR INSTALLATION..............................................................7
PLANNING THE INSTALLATION..........................................................................8
SELECTION OF INSTALLATION SITE ..................................................................8
INSTALLATION AND FIXATION OF ANTENNA ...................................................10
INSTALLING THE ACU....................................................................................15
CONNECTING THE SYSTEM CABLES ...............................................................17
CONNECTING THE SYSTEM TO A GPS .............................................................20
TARGET SATELLITE SETTING..........................................................................21
ADJUSTING THE LNB SKEW ANGLE (LINEAR POLARIZATION ONLY)..............22
OPERATION INSTRUCTION..................................................................23
INTRODUCTION ..............................................................................................23
OPERATION USING THE ACU...............................................................24
ACU SOFT KEYS ...........................................................................................24
NORMAL MODE .............................................................................................24
SET UP MODE ................................................................................................29
OPERATION USING PC CONTROLLER PROGRAM........................51
INTRODUCTION ..............................................................................................51
PROGRAM INITIALING AND SERIAL PORT SETUP ............................................52
MAIN MENU –USING DEFAULT DUAL-SAT MODE .........................................53
SET SATELLITE INFORMATION........................................................................54
MAIN MENU-USING ADVANCED TRIPLE-SAT MODE......................................55
SET SATELLITE INFORMATION........................................................................56
CONTROLLER MENU.......................................................................................59
TROUBLESHOOTING .............................................................................64
PREPARATION FOR TRANSPORTATION...........................................66
WARRANTY...............................................................................................67
APPENDIX : TECHNICALSPECIFICATION.......................................68
INTELLIAN I4..................................................................................................68
INTELLIAN I3..................................................................................................69

Introduction 1
INTRODUCTION
Introduction to Intellian i3/i4
Intellian i3/i4 (Intellian i3 or Intellian i4)
Intellian i3/i4 is a digital satellite antenna system designed specifically for all
types of vessels (Anchored or transit) to automatically identify, track and
capture satellite signals from the Digital Video Broadcasting (DVB: the
international standard for digital TV transmissions) compatible Satellites.
Specifically, Intellian i3/i4 has Wide Range Search (WRS) algorithm, which
minimizes the search time at initial state and Dynamic Beam Tilting (DBT)
technology, which dynamically shapes the antenna beam to utilize stabilization.
Once the satellite is acquired, the antenna DBT continuously measures the
heading, pitch, and roll of the vessel by obtaining satellite signal level around
the antenna point, and transmits commands to the antenna motors to keep the
antenna pointed at the satellite at all times. This active stabilization is
enhanced by a conical scan tracking function to detect and lock onto the
strongest signal, resulting in the clearest reception possible.
GPS is built into the Intellian i3/i4. With the added built-in features the Intellian
i3/i4 enables for faster and more efficient tracking of satellites.

2 i3/i4 Satellite Antenna System – Install and User Manual
Features of Intellian i3/i4
Enjoy satellite broadcasts at sea
Intellian i3/i4 is the most modern antenna system that enables you to
receive high quality broadcasting signal at sea where the atmospheric and
environmental condition is very harsh.
Fully Automatic Control System
Fully automatic control system allows for you to simply turn the power
switch on for crystal clear high quality satellite television in motion or at
anchor.
High Quality Antenna
The high-tech antenna technology has been adopted for this parabolic
antenna system which is optimal for the marine conditions and it enables
you to receive the optimal level of signal even when it rains or snows.
Fast and efficient search for the satellite
The WRS (Wide Range Search) algorithm allows for the antenna system
to search the satellite within the shortest amount of time and to detect the
satellite signal under any position and any directional movement of the
ship.
Outstanding Reliability
Intellian i3/i4 provides highly reliable system through the implementation of
a modularized design and the usage of strictly proven components.
Built-in GPS
Intellian i3/i4 has imbedded GPS, which allows for the system to upload
the GPS data automatically into the system for an even faster and stable
system.
Easy Installation
Intellian i3/i4 uses one RF cable installation.
Compact Size
Intellian i3/i4 is small and compact size for small vessels.

Introduction 3
Basic System Configuration of Intellian i3/i4
In order to work your satellite TV system properly, the system will have to
connect with all of the provided components properly as shown in the figure
below (Refer to next chapter ‘Installation’ of this manual for the more detail
connection method). Separate purchase of a satellite receiver and a TV is
required.
NMEA GPS
TV(NotSupplied)
PC( No t Sup p lied)
Satellite Receiver (Not Supplied)
DC Po wer o n Vessel
(DC-10.8-15.6V)
Antenna Control Unit
TV (Not Supplied)
Satellite Receiver (Not Supplied)

4 i3/i4 Satellite Antenna System – Install and User Manual
Installation
The components of the Intellian i3/i4 have been designed to be modular
so that it may be suitable for simple installation on all types of vessels.
System Components
Antenna Unit
The antenna of Intellian i3/i4 is composed with the following components for
the optimum search and reception of the satellite signal.
yMechanical Part – manipulates the antenna to receive the
optimal satellite signal regardless of the movement of the
vessel.
yControl part – controls mechanical operation of the antenna.
yRF part – transmits the optimum satellite signal to the receiver.
yRadome – protects the antenna from the severe marine
environment.

Installation 5
Antenna Control Unit (ACU)
Antenna Control Unit (ACU) provides the power to the antenna and controls
the various settings of the antenna. Additionally, VFD (Vacuum Fluorescent
Display) allows for you to access the ACU in the dark.
The functions of the ACU are as follows:
yProvide power for the Antenna Unit
yMonitor the antenna status
yChange the target satellite
ySet up the user environment
ySet the current GPS information
ySet satellite information
yMove antenna manually
yPerform self-diagnosis of the antenna
ySet up the interface with PC
Front
Rear

6 i3/i4 Satellite Antenna System – Install and User Manual
Installation Kit
Contain the items required for securing the antenna unit and ACU to
your Boat.
An ten n a ACU
Hexagonal Bolt
5EA
Spring Washer
5EA
Flat Washer
5EA
Tapping Screw
(Φ4x16L)
5EA
Machine Screw
(Φ3x8L)
5EA
Other Components
No Components Size Q’ty
1 ACU Bracket - 2EA
2 RG6(Antenna – ACU RF Cable) 15m 1EA
3 RG6(ACU – IRD Cable) 3m 1EA
4 Power Cable 10m 1EA
5 PC Serial Cable 1.8m 1EA
6 NMEA Connector AK950-2 1EA
7 Power Connector AK950-3 1EA
8
Hex Bolt M8x35L 5EA
Tapping Screw
ø4x16L 5EA
ø3×8L 5EA
Flat Washer M8 5EA
Spring Washer M8 5EA
9 Install CD - 1EA
10 Manual - 1EA
11 Installation Template i3 297x210 1EA
i4 420x297

Installation 7
Tools Required for Installation
Power Bit
Cross-Head
Screwdriver
11mm Spanner
13mm Spanner
Φ10mm(3/8”)
Bit
Φ80mm(3”)
Hole Saw
Pencil

8 i3/i4 Satellite Antenna System – Install and User Manual
Planning the installation
Selection of Installation Site
Install the antenna in accordance with the following procedure to secure the
maximum functionality of the antenna.
The ideal antenna site has a clear view of the horizon/satellite all around.
Please be sure to see if there are
any obstacles 15 degrees above
elevation blocking the antenna.
Any obstacles located above 15
degree elevation can prevent the
antenna from tracking satellite
signal (Refer to the drawing).
Keep the antenna out of line with nearby radars, as their energy levels may
overload the antenna front-end circuits. If necessary, position the Antenna
Unit so it is at least four feet (1.2 meters) above or below the level of the
radar.
Make sure that the mounting surface is rigid so that it cannot flex when the
vessel vibrates. If necessary, add a strength member to the mounting site to
stiffen it.
The movement of the antenna can be minimized by installing it at the center
of the ship. For optimal performance of the antenna it is not recommended to
install at any corners of the ship, where the movement of the ship is the
greatest.
Install the bottom of the antenna parallel to the surface of the sea and fix
tightly to the structure of the ship.
When the antenna is to be laid down, be careful not to have the power
connector and/or RF connector damaged by striking directly against the
bottom, which causes connection to be impossible.
AntennaUnit
15°
Obstacle

Installation 9
Cables
Before installing the system cables, you need to take the following points
into consideration.
yAll cables need to be well clamped and protected from physical damage
and exposure to heat and humility.
yCable with an acute bends is not allowed.
yWhere a cable passes through an exposed bulkhead or deckhead,
a watertight gland or swan neck tube should be used.
Power requirements
You need to consider the following power requirements:
Intellian i3/i4 has been designed to work on a boat’s power supply
rated from 10.8~15.6 V DC.
If your boats power supply is rated at 24V DC you will need to install a
suitable DC power inverter to reduce the supply voltage to 12V DC.
If your IRD(s) and television(s) require a 220/240V AC power supply, you
will need to install a suitable DC to AC converter to operate the units from
your boat’s DC power supply.
Extending the cables
The cables that have been supplied with your system should be of adequate
length to complete the installation on most boats. However, should it be
necessary to extend a cable the following points should be considered.
Power Cable
This cable supplied at a length of 10m.
RF Cable
This cable is supplied at a length of 15m. If a longer length is required you
should replace this cable with the extended RF cable which is supplied by
Intellian Technologies.
The indicated cable lengths should not be exceeded as resulting in reduced
performance of your system.
WARNINGWARNING

10 i3/i4 Satellite Antenna System – Install and User Manual
Installation and Fixation of antenna
The method of installation and fixation of antenna may be diverse with vessel
design but the following procedures are applicable in most situations and will
result in a secure and effective installation.
Confirmation of size and installation of power tower
yConfirm the height and diameter of the bottom surface of the
antenna before installing it.
yThe space must be sufficient for installing the antenna unit
considering the height and diameter of the antenna.
yThe height and the diameter of the bottom surface of the antenna
are as shown in the following drawing. If possible, install power
tower where antenna is to be installed.
Ø50 (19.7”)
54 (21.2”)
Unit : cm (inch)
Intellian i4

Installation 11
Ø43 (17”)
44 (17.3”)
Unit : cm (inch)
Intellian i3
Before installing the antenna you have to dismantle the radome with a
hexagon wrench tool and remove the foam fixation from the antenna
interior. You have to reassemble the radome before installation.
WARNINGWARNING

12 i3/i4 Satellite Antenna System – Install and User Manual
Mark of the antenna parking position
Referring to the size in the drawing, mark where antenna is to be parked on
board the ship (it must be a flat surface) or on a separate power tower by
drawing.
22.86(9”)
22.86 (5.6”)
Unit : cm (inch)
Intellian i4
23.3 (9.2”)
14.15 (5.6”)
Unit : cm (inc h)
Intellian i3
In case that power tower is not to be used, a separate cable shock
and water proofing measures shall be taken to protect the RF from
being exposed to the sea water and external shocks. The exposed RF
cable may cause the electric shock and cause serious damage of the
equipments.
WARNINGWARNING

Installation 13
Securing hole for bolts and cable way
ø10mm(3/8”) Bit
ø80mm(3”)
Hole saw
Make 4 bolt holes of 10mm (3/8 “) diameter, one at each corner of a rectangle
drawn as above, and make a circular hole of 80mm (3”) diameter at the
center of the rectangle through which cable may run.
Connection of RF cable
Remove the rubber protector for RF cable connector RF1 at the bottom of the
antenna. Connect the RF Cable to the RF connector under the base plate
through the access hole using the 11mm (7/16 “) spanner. Be careful not to
tighten too much, as you may damage the connector.
RF Cable Optional
An ten n a Un it
11mm Spanner
Do not use excessive force when using the spanner to avoid damage of the
screw part. Be careful so that the connectors do not directly touch to the
mounting surface of the antenna, or it may cause a critical malfunction and a
serious damage to the equipment.
WARNINGWARNING

14 i3/i4 Satellite Antenna System – Install and User Manual
Fixation of the antenna
Fix the antenna to the holes made before as the drawing below by using the
hex head bolts (M8 X 35L), M8 spring washer and M8 flat washer supplied.
Antenna Unit Support
Deck
M8 Flat Washer
M8 Hex. Bolt
13mm Spanner
M8 Spring Washer

Installation 15
Installing the ACU
ACU dimensions
5.38 (2.1”)
21.68(8.5”)
20.8 (8.2”)
22.8 (9”)
17.8 (7”)
5.5(2.2”)
13(5.1”)
18.5(7.3”)
Unit : cm (inch)
Installation Site
The ACU should be installed below decks, in a place of :
yDry, cool, and ventilated.
yEasy accessible from your main TV viewing area.

16 i3/i4 Satellite Antenna System – Install and User Manual
To Install the ACU
1. The ACU should be installed using the two fixing brackets supplied to
provide a top or bottom fix.
2. Using the self tapping screws supplied fix the mounting brackets to the
sides of the ACU.
3. Place the ACU in the position where it is going to be installed.
4. Connect the cables to the rear of the ACU.
5. Using a pencil to mark the 4 hole positions (2 each side) for securing the
mounting brackets and using a suitable drill bit to drill them.