Intellian i9 User manual

Intellian i9/i9P Serial Number
This serial number will be required for
all troubleshooting or service calls
made regarding this product.
Notice
All Right Reserved
Intellian i9/i9P®and Intellian®are the registered trademarks of Intellian
Technologies, Inc., and should not be appropriated without permission by
Intellian Technologies, Inc., and the information contained in this manual is the
property of Intellian Technologies, Inc. Any and all parts of this manual shall not
be reproduced and distributed in any form without prior written consent by
Intellian Technologies, Inc. The information contained in this manual shall be
subject to change at any time without notice due to the functional upgrades of the
product.
Copyright© Intellian Technologies, Inc.
Doc. No. I9/I9P-DC V100

CONTENTS
.......................................................................................................................... 1
TO INTELLIAN I9/ ........................................................................................... 1
OF INTELLIAN I9/............................................................................................ 1
OF INTELLIAN I9/............................................................................................ 2
SYSTEM ........................................................................................................ 3
.......................................................................................................................... 4
...................................................................................................................... 4
REQUIRED FOR .............................................................................................. 8
THE .............................................................................................................. 9
AND MOUNTING OF .....................................................................................11
THE ............................................................................................................. 15
THE SYSTEM TO A ........................................................................................ 19
SATELLITE ................................................................................................... 20
THE LNB SKEW ANGLE (LINEAR POLARIZATION ONLY)............................... 21
....................................................................................................................... 23
..................................................................................................................... 23
USING THE ................................................................................................. 24
SOFT ............................................................................................................ 24
.................................................................................................................... 24
UP ............................................................................................................... 29
USING PC CONTROLLER ...................................................................... 51
..................................................................................................................... 51
INITIALING AND SERIAL PORT ..................................................................... 52
MENU –USING DEFAULT DUAL-SAT ........................................................... 53
SATELLITE .................................................................................................. 54
MENU-USING ADVANCED TRI-SAT ............................................................. 56
SATELLITE .................................................................................................. 57
.................................................................................................................... 60
......................................................................................................................... 65
FOR ............................................................................................................. 67
......................................................................................................................... 68
: TECHNICAL ............................................................................................ 69

Introduction 1
INTRODUCTION
Introduction to Intellian i9/i9P(Premium)
Intellian i9/i9P is a digital satellite antenna system designed specifically
for all types of vessels (Anchored or transit) to automatically identify, track
and capture satellite signals from the Digital Video Broadcasting (DVB:
the international standard for digital TV transmissions) compatible
satellites.
Specifically, Intellian i9/i9P has Wide Range Search (WRS) algorithm,
which minimizes the search time during initialization, and Dynamic Beam
Tilting (DBT) technology, which dynamically shapes the antenna beam to
utilize stabilization. Once the satellite is acquired, the antenna DBT
continuously measures the heading, pitch, and roll of the vessel by
obtaining the satellite signal level around the antenna point, and transmits
commands to the antenna motors to keep the antenna pointed at the
satellite at all times. This active stabilization is enhanced by a conical
scan tracking function to detect and lock onto the strongest signal,
resulting in the clearest reception possible.
The i9/i9P has a built-in GPS system which enhances the speed of
satellite signals acquisitions. In addition, the i9P provides the embedded
auto skew angle control system to maintain the optimal signal strength
and increase the quality of satellite receptions in weak satellite single
coverage area.

2i9/i9P Satellite Antenna System – Install and User Manual
Features of Intellian i9/i9P
Enjoy satellite broadcasts at sea
Intellian i9/i9P is the most modern antenna system that enables you to
receive a high quality broadcasting signal at sea, where the atmospheric
and environmental condition are very harsh.
Fully automatic control system
Fully automatic control system allows you to simply turn the power switch
on, and have crystal clear, high quality satellite television in motion or at
anchor.
High quality antenna
High tech parabolic antenna technology has been adopted for this
antenna system, which is optimal for marine conditions. This enables you
to receive the optimal signal level even when it is raining or snowing.
Fast and efficient search for the satellite
The WRS (Wide Range Search) algorithm allows for the antenna system
to search the satellite within the shortest amount of time and to detect the
satellite signal under any position and with any directional movement of
the ship.
Outstanding reliability
Intellian i9/i9P provides highly reliable system through the implementation
of a modularized design, and the usage of strictly proven components.
Built-in GPS
Intellian i9/i9P has imbedded GPS, which allows for the system to upload
the GPS data automatically into the system for an even faster and stable
system.
Built-in automatic skew angle control system
The automatic skew control system allows Intellian i9P to maintain
the optimal skew angle at all times and ensure maximum level of
satellite signal level.

Introduction 3
Basic System Configuration
For your satellite TV system to work properly, the system will have to
be connected with all of the provided components properly, as shown
in the figure below (Refer to next chapter ‘Installation’ in this manual
for more detailed connection instructions). Separate purchase of a
satellite receiver and a TV is required.
NMEA
GPS
DC Power Cable PC Cable
IRD2 (Not Supplied)
TV (Not Supplied)
IRD1 (Not Supplied)
IRD3 (Not Supplied)
IRD4 (Not Supplied)
RF Cable
Power & Data Cable
(Optional)
(Optional)
(Optional)
[i9P System Diagram]

4i9/i9P Satellite Antenna System – Install and User Manual
NMEA
GPS
DC Power Cable PC Cable
IRD1 (Not Supplied)
TV (NotSupplied)
IRD2(Not Supplied)
Power&
Data Cable
RF cable
(Optional )
[i9 System Diagram]
Installation
The components of the Intellian i9/i9P have been designed to be
modular so that it is suitable for simple installation on all types of vessels.
System Components
Antenna Unit
The antenna of Intellian i9/i9P is composed with the following components for
the optimum search and reception of the satellite signal.
Mechanical Unit – manipulates the antenna to receive the optimal
satellite signal regardless of the movement of the vessel.

Installation 5
Control Unit – controls mechanical operation of the antenna.
RF Unit – transmits the optimum satellite signal to the receiver.
Radome – protects the antenna from the severe marine
environment.
Antenna Control Unit (ACU)
The Antenna Control Unit (ACU) provides the power to the antenna and
controls the various settings of the antenna. Additionally, VFD (Vacuum
Fluorescent Display) allows for you to operate the ACU in the dark.
The functions of theACU are as follows:
Provide power for the antenna unit
Monitor the antenna status
Change the target satellite
Set up the user environment
Set the current GPS information
Set satellite information

6i9/i9P Satellite Antenna System – Install and User Manual
Move antenna manually
Perform self-diagnosis of the antenna
Set up the interface with a PC
Front
i9P Rear
i9 Rear

Installation 7
Installation Kit
Contain the items required for securing the antenna unit and ACU
to your boat.
Other Components
No Components Size Q’ty
1 ACU Bracket - 2EA
2 RG6 (Antenna – ACU RF Cable) 30m 1EA
3 RG6 (ACU – IRD Cable) 3m 1EA
4 Power Cable 10m 1EA
5 PC Serial Cable 1.8m 1EA
6 Power & Data Cable 30m 1EA
7 NMEA Connector AK950-2 1EA
8 Power Connector AK950-3 1EA
9
Hex Bolt M8x60L 5EA
Hex Head Wrench Bolt M6x35L 5EA
Tapping Screw ø4×16L 5EA
ø3×8L 5EA
Flat Washer M8 10EA
M6 5EA
Spring Washer M8 5EA
Nut M8 5EA
Eye Nut M6 5EA
10 Install CD - 1EA
11 Manual - 1EA
12 Mounting Template - 1EA
13 Quick Installation Guide - 1EA
Antenna
ACU
Hex. Bolt
5EA
Hex Head
Wrench Bolt
5EA
Flat Washer
10EA
Spring
Washer
5EA
Hex. Nut
5EA
Tapping
Screw
(Φ4x16L)
5EA
Machine
Screw
(Φ3x8L)
5EA

8i9/i9P Satellite Antenna System – Install and User Manual
Tools Required for Installation
Power Drill
Cross-Head
Screwdriver 11mm Spanner
13mm Spanner
Φ10mm Drill
Pencil
10mm Spanner

Installation 9
AntennaUnit
15°
Obstacle
Planning the installation
Selection of Installation Site
Install the antenna in accordance with the following procedures to insure
maximum performance of the antenna.
The ideal antenna site has a clear view
of the horizon/satellite all around. Please
be sure there are no obstacles within 15
degrees above the antenna. Any
obstacles located above a 15 degree
elevation can prevent the antenna from
tracking the satellite signal (Refer to the drawing).
Keep the antenna out of line with nearby radars, as their energy levels may
overload the antenna front-end circuits. If necessary, position the antenna
unit so it is at least four feet (1.2 meters) above or below the level of the
radar.
Make sure that the mounting surface is rigid, so that it will not flex when the
vessel vibrates. If necessary, add a stiffening member to the mounting site to
strengthen it.
The movement of the antenna can be minimized by installing it at the center
of the ship. For optimal performance of the antenna, it is not recommended to
install at any corner of the ship, where the movement of the ship is the
greatest.
Install the bottom of the antenna parallel to the surface of the sea and fix
tightly to the structure of the ship.
When setting the antenna down, be careful not to have the RF connector.
Striking the connector on the bottom directly will damage the connector and
make connection impossible.

10 i9/i9P Satellite Antenna System – Install and User Manual
Cables
Before installing the system cables, you need to take the following points
into consideration.
All cables need to be well clamped and protected from physical
damage and exposure to heat and humility.
Cable with an acute bend is not allowed.
Where a cable passes through an exposed bulkhead or deckhead,
a watertight gland or swan neck tube should be used.
Power requirements
You need to follow the power requirements to avoid damage to the system.
Intellian i9/i9P has been designed to work on a boat’s power supply rated at
12 VDC. (acceptable range: 10.8~15.6 V DC) .
If your IRD(s) and television(s) require a 110V/240V AC power, a suitable DC
to AC converter will be needed to operate the unit(s) fromyour boat’s DC
power supply.
Extending the cables
The cables that have been supplied with your Intellian system should be of
adequate length to complete the installation on most boats.
Power & Data Cable
This cable supplied at a length of 30m.
RF Cable
This cable is supplied at a length of 30m. If a longer length is required you
should replace this cable with an extended RF cable supplied by Intellian
Technologies.
Power Cable
This cable is supplied at a length of 10m.
Exceeding the indicated cable lengths will result in reduced performance of
your system.
WARNINGWARNING

Installation 11
Installation and Mounting of antenna
The method of installation and mounting of antenna may vary with vessel
design but the following procedures are applicable in most situations, and will
result in a secure and effective installation.
Confirmation of size prior to installation
Confirm the height and diameter of the bottom surface of the
antenna before installing it.
The space must be sufficient for installing the antenna unit
considering the height and diameter of the antenna.
The height and the diameter of the bottom surface of the antenna
are as shown in the following drawing. If possible, install the
antenna using a power tower.
Ø108cm (42.5”)
110cm (43.3”)
Before installing the antenna you have to remove the radome and remove
the shipping foam from the antenna interior. Replace the radome before
installation. The system functions will be abnormal if the radome is off.
WARNINGWARNING

12 i9/i9P Satellite Antenna System – Install and User Manual
Mark of the antenna mounting position
Referring to the mounting template, mark where antenna is to be mounted
on board the ship (it must be a flat surface) or on a separate power tower by
drawing a square of 30.37 cm (12”).
30.37cm (12”)
30.37cm (12”)
If a power tower is not sued to mount the antenna, separate cable shock and
waterproofing measures must be taken to protect the RF/ Power &Data
connector from begin exposed to the sea water and external shocks. An
exposed cable may cause electric shock and cause serious damage to the
equipment.
Mounting holes for bolts
ø10mm drill
Make 4 bolt holes of 10mm diameter, one at each corner of a rectangle drawn
as above.
WARNINGWARNING

Installation 13
Connection of the Power & Data cable and RF cable
Remove the cable cover on the radome bottom. Connect the Power &Data
cable from the power connector. Connect the RF cable to the RF1 connector
using 11mm spanner. Be careful not to tighten it too much, as you may
damage the connector.
RF Cable Optional RF cable
11mm Spanner
Power and Data Cable
Do not use excessive force when using the spanner, this will damage the
threads. Be careful that the connectors do not contact the mounting surface
of the antenna, this may cause a critical malfunction and serious damage to
the equipment.
WARNINGWARNING

14 i9/i9P Satellite Antenna System – Install and User Manual
Mounting the antenna
Attach the antenna by using the hex head bolts (M8x50L), M8 spring washers,
M8 flat washers and M8 nuts supplied.
Antenna Unit
Deck
M8 Flat Washer
M8 Hex. Bolt
13mm Spanner
M8 Spring Washer
13mm Spanner
M8 Flat Washer
M8 Hex. Nut

Installation 15
Installing the ACU
ACU dimensions
5.38cm (2.1”)
21.68cm (8.5”)
22.8cm (9”)
17.8cm (7”)
5.5cm (2.2”)
18.5cm (7.3”)
Selection of Installation Site
The ACU should be installed below deck, in a location that is:
Dry, cool, and ventilated.
Easy accessible from your main TV viewing area.
.

16 i9/i9P Satellite Antenna System – Install and User Manual
To Install the ACU
1. The ACU should be installed using the two supplied mounting brackets
which allow for a top or bottom mounting configuration.
2. Using the self tapping screws supplied, attach the mounting brackets to the
sides of the ACU.
3. Place the ACU in the location where it is going to be installed.
4. Connect the cables to the rear of the ACU.
5. Using a pencil to mark the 4 hole positions (2 each side), and use the
appropriate drill bit to drill them.

Installation 17
Connection the System Cables for i9P
After installation and fixation of the antenna, connect theACU to the antenna.
Refer to the drawing below to connect cables.
NMEA
GPS
DC Power Cable PC Cable
IRD2 (Not Supplied)
TV (NotSupplied)
IRD1 (Not Supplied)
IRD3 (Not Supplied)
IRD4 (Not Supplied)
RF Cable
Power and Data Cable
(Optional)
(Optional)
(Optional)
[i9P System Diagram]
Connect the Power & Data Cable (30m) from the antenna to the
ANTENNA connector on the rear of the ACU.
Connect the RF Cable (30m) from the RF1 connector on the antenna to
‘LNB’,’ANT’ or ‘Satellite In’ on the rear panel of the IRD.
Connect the power cable (10m) from DC power connector on the rear of
ACU to a power source at 12 VDC.
Press the POWER ON switch in front of the ACU to start the operation of
the antenna system automatically.

18 i9/i9P Satellite Antenna System – Install and User Manual
Connection the System Cables for i9
After installation and fixation of the antenna, connect theACU to the antenna.
Refer to the drawing below to connect cables.
NMEA
GPS
DC Power Cable PC Cable
IRD2 (Not Supplied)
TV (NotSupplied)
IRD1 (Not Supplied)
RF Cable
Power and Data Cable
(Optional)
[i9 System Diagram]
Connect the Power & Data Cable (30m) from the antenna to the
ANTENNA connector on the rear of the ACU.
Connect the RF Cable (30m) from the RF1 connector on the antenna to
the ANT.RF1 connector on the rear of the ACU.
Connect the power cable (10m) from DC power connector on the rear of
ACU to a power source at 12 VDC.
Press the POWER ON switch in front of the ACU to start the operation of
the antenna system automatically.