Intellian v150NX User manual

150 cm Maritime VSAT Antenna System
v150NX
Installation & Operation User Guide

Doc. No. UM-V3-190820-V1.0
Serial number of the product
This serial number will be required for all troubleshooting or service inquiries.
© 2019 Intellian Technologies, Inc. All rights reserved. Intellian and the Intellian logo are
trademarks of Intellian Technologies, Inc., registered in the U.S. and other countries. The
v150NX is a trademark of Intellian Technologies, Inc. Intellian may have patents, patent
applications, trademarks, copyrights, or other intellectual property rights covering subject
matter in this document. Except as expressly provided in any written license agreement
from Intellian, the furnishing of this document does not give you any license to these
patents, trademarks, copyrights, or other intellectual property. All other logos, trademarks,
and registered trademarks are the property of their respective owners. Information in this
document is subject to change without notice. Every effort has been made to ensure that
the information in this guide is accurate. Intellian is not responsible for printing or clerical
errors.
Disclaimer
The information in this user guide is subject to change without prior notice through a
product life cycle. A printed version of the guide is periodically updated and may contain
inaccuracies or omissions compared to the recent product information. The most up-to-
date information can be readily accessible on our website at http://www.Intelliantech.com.

4
Precautions
Precautions
THIS WAY UP
• Place the boxes/crates on the oor with the arrow pointing up.
FRAGILE
• Since the Radome is fragile, handle it with care. Do not apply excessive pressure or
shock. These may cause surface cracking or other damage.
DO NOT STACK
• Do not stack boxes/crates as there is a risk boxes/crates may fall and be damaged.
KEEP DRY
• Always make sure the antenna is stored on a dried oor.
• The antenna can withstand ordinary rain. However it water resistance cannot be
guaranteed if submerged.
• Keep the antenna in dried place for sufcient ventilation. Do not store the antenna
wrapped in a tarp, tent, vinyl, and others.
WARNING
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, could result in
minor or moderate injury. It may also be used to alert against unsafe practices.
NOTE
NOTE
A NOTE statement is used to notify people of installation, operation, programming, or
maintenance information that is important, but not hazard-related.
General Precautions
Before you use the antenna, make sure that you have read and understood all safety requirements.
Warnings, Cautions, and Notes
WARNING, CAUTION, and NOTE statements are used throughout this manual to emphasize important and
critical information. You must read these statements to help ensure safety and to prevent product damage.
The statements are dened below.
* DO NOT SHIP VIA RAIL: Ensure not to ship any system via Rail.

5
Table of contents
Table of contents
Introduction
Intellian v150NX Introduction 8
Intellian v150NX Features 9
Antenna Unit 10
Antenna Control Unit (ACU) 10
Air-Conditioner (Optional) B-11
Planning Installation
ACU Box (Including Components Kit) 12
Antenna Specication 13
Antenna Dimensions 13
Heading Alignment 14
Mast Designing (Installation Example) 15
When Placing Cable Outside Mast 15
Antenna Mounting Hole Pattern 16
Preparing Installation 17
Selection of Installation Site 17
Minimize Satellite Blockage 17
Avoid RF Interference 18
RF Hazard Precautions 18
Preparing System Cables 19
Placing Cable on Mast 20
Installing Antenna
Antenna Installation 21
Unpacking Wooden Crate 21
Removing Antenna from Wooden Crate 23
Placing Antenna on Mast 24
Mounting Radome 24
Connecting RF Cable & AC Power Cable (Customer Supplied) 25
Installing ACU
Selection of ACU Installation Site 27
ACU Dimensions 27
Mounting the ACU 28
19" Rack Mount Type 28
System Congurations 29
Single Antenna System Conguration (Basic Antenna System) 29
Dual Antenna System Conguration (Optional) 30

6
Table of contents
ACU Cable Connection 31
Name of ACU Rear Panel 31
Connecting to Antenna 31
Connecting to Antenna (Optional: For Dual Antenna System) 32
Connecting to the Modem 32
Connecting to Additional ACU (Optional: For Dual Antenna System) 33
Connecting to the Switch Router 33
Connecting Ship's Gyrocompass 34
How to Connect NMEA 0183 Gyrocompass Cable 34
ACU Connector Pinout Guide 35
Console Connector (Modem Interface) 35
RS232/RS422 Connector (Modem Interface) 35
RS232 Connector (PC Interface) 36
RS232/RS422 Connector (BUC Interface) 36
NMEA 2000 Connector 37
LAN 1~4 Ports 37
ACU to PC Communication Setup 38
TCP/IP Connection 38
Wi-Fi Connection 39
Operating Install Wizard
Turning On System 40
Accessing AptusNX 40
Setting up Modem Conguration 41
Starting Install Wizard 43
Operating ACU
Introduction 52
Antenna Control Unit (ACU) 52
ACU Front Panel 52
ACU Display Menu 53
Startup 54
Diagnosis 56
Antenna Information 58
Interface Information 59
Using AptusNX
Introduction 65
How to access AptusNX for ACU 65
Main Page 66
Page Login 66
Top Menus 67
Account Menu 68

7
Table of contents
Account 68
Registration 69
System 70
User Manager 71
Dashboard 72
How to Add & Remove Panels (Dashboard Setting) 72
How to Arrange Dashboard Layout 73
How to Use Shortcut Settings 74
Install Wizard 74
System Tools 75
Firmware Upgrade 75
iARM Upgrade 77
iARM Save & Reboot 78
Satellite Library 79
Spectrum Graph 80
Graph 81
System Troubleshooting 82
Diagnosis 82
Antenna Log 84
Antenna Event Log 85
Support 85
System Setting 86
Ship Setting 86
Antenna Setting 88
Tracking Satellite Setting 91
Network Conguration 92
Modem/BUC Setting 94
SNMP Setting 97
Backup & Restore Setting 98
Mediator Setting (Optional: For Dual Antenna System) 99
Specification
Technical Specication 101
Environmental Specication 102
Warranty
Warranty Policy 103
Appendix A
Starting Dual Antenna System (Optional) A-1
Appendix B
Assembling Air-Conditioner (Optional) B-1

8
Introduction
Intellian v150NX Introduction
Intellian v150NX is a Ku-band 3-axis stabilized VSAT maritime antenna system. The v150NX provides advanced
VSAT solutions for Ku-band satellite services. v150NX is equipped with a new mounting architecture RF
module.
The antenna's 3-axis stabilized platform and advanced shock-resistant and vibration damping design of the
Pedestal is fully optimized to withstand the demanding maritime conditions and to ensure reliable broadband
communications.
The v150NX is even more operator-friendly in that it combines TX, RX and DC power into one cable, simplifying
installation. With the new radome design, the dome-on external single cable connection means that installers
do not need to remove the radome during installation either.
Equipped with Intellian's next generation Antenna Control Software, "AptusNX", the v150NX antenna can be
easily accessed, monitored and controlled. This new simply congured tool can alert an operator to possible
problems with its enhanced diagnostic capabilities and can also provide automatic alerts when preventative
maintenance may be required.
The v150NX is supplied with both cross-pol and co-pol feeds and comes equipped with Intellian's patent
pending Global PLL LNB by standard.
Introduction

9
Introduction
Intellian v150NX Features
Higher RF Performance
Intellian's highly efcient RF design delivers superior performance compared to other 150 cm class systems,
enabling higher data rates and global operation. The v150NX has improved tracking precision and reliability
in a streamlined mechanical design. The v150NX system is supplied as standard with 40 W BUC (Terrasat), or
can be supplied with 16 W (NJRC) and 100 W (Terrasat) variants.
Single Coaxial Cable
Combined Tx, Rx and DC power in a Single Cable solution, the v150NX enables faster and reduced costs of
installation. Dynamic Motor Brakes, eliminating the requirement of shipping brackets, and Dome-On external
RF cable connection on the base allow easier and quicker installation without removing the radome.
Embedded Dual Antenna Mediator function
Intellian's new ACU fully supports dual antenna operation without additional hardware such as a separate
mediator, RF splitters and cables. Eliminate loss of signal due to blockage by using dual antenna systems.
Standardized Modular Components Across NX Series
Modular components are used throughout the NX range, such as dynamically braked motors with integrated
encoders, Main Control Unit and skew assembly. Sharing common modules across Intellian's NX antenna
series, the number of spare parts is reduced by more than 30%.
AptusNX Intelligent Diagnosis
Intellian's all new integrated M&C software, enables advanced alerts from the live data monitoring and analysis
agent, the v150NX sends warning messages to the NOC in advance when it detects any abnormal operation.
Intuitive web application interface is designed to provide a superior user experience. AptusNX enhances
remote diagnosis, automates routine processes and includes an integrated spectrum analyzer. The AptusNX
API enables integration directly within an NOC for total eet-wide visibility.

10
Introduction
Antenna Unit
The antenna unit includes an antenna pedestal inside a radome assembly unit. The pedestal consists of a
satellite antenna main dish with RF components mounted on a stabilized pedestal. The radome protects the
antenna pedestal assembly unit from the severe marine environment.
Figure: Radome & Antenna Unit
Antenna Control Unit (ACU)
Antenna Control Unit (ACU) controls Antenna system operation. The following functions are supported by
ACU.
• High power supply for the high power BUC
• Mediator function included
• Spectrum analyzer function included
• OLED display
• USB Log download & Firmware upgrade (No PC required)
• Wi-Fi access
• AptusNX Web application
Figure: Front Panel of ACU
Figure: Rear Panel of ACU

11
Planning Installation
Air-Conditioner (Optional)
v150NX is designed to assemble a separate air-conditioner under the radome if necessary. For more detailed
information for assembling the air conditioner refer to the "Appendix B".
Figure: Air-Conditioned AntennaFigure: Standard Antenna

12
Planning Installation
ACU Box (Including Components Kit)
Before beginning installation, make sure you have all the included components.
Description Q'ty Size Remarks
Antenna Control Unit (ACU) 1 431 mm x 350 mm x
44.3 mm Antenna Control Unit (ACU)
Quick Installation Guide (QIG) 1
RF Hazard Sticker 1 Radiation Safety Distance (15 m) Label
Mounting Template 1
ACU Rack Mount Bracket 2 To x ACU to 19 inch Rack Frame
Flat Head Screw 10 M4 x 12L Bolt Kit for Rack Type Mount Bracket
USB Cable (A-A) 1 1.8 m ACU (Front Panel) to PC
AC Power Cord (CEEE7/7) 1 1.5 m ACU Power (220 V)
RG-6 RF Cable 2 1 m ACU to Modem
Modem Interface Cable
(For iDirect Modem) 1 1.5 m ACU to Modem (iDirect Modem)
Ethernet Cable (RJ45/LAN) 2 1 m ACU to PC/Intellian M&C
Wi-Fi Dongle 1
Hex Bolt (BUMAX) 5 M12 x 80L
Bolt Kit for Antenna-Deck (Mast)
Assembly (1 spare set included)
Flat Washer (BUMAX) 5 M12
Spring Washer (BUMAX) 5 M12
Hex Head Wrench Bolt 5 M6 x 40L Bolt Kit for Radome Assembly
Spring Washer and Flat Washer 5 M6
Cable Tie 50 140 mm For Fixing Cables
Loctite 263 1 10 ml
Planning Installation

13
Planning Installation
Antenna Dimensions
Conrm the height and diameter of the bottom surface of the antenna unit before installing it. The mounting
surface and overall space occupied by the antenna must be sufcient for the height and diameter of the
fully constructed radome on top of its base frame. The height and the diameter of the bottom surface of the
antenna are as shown in the following drawing. It is strongly suggested that the installation is conducted using
a crane.
Figure: Antenna Dimensions
Antenna Specication
1970 mm (77.55")
Ø1900 mm (74.80")

14
Planning Installation
Heading Alignment
The radome assembly should be positioned with the BOW marker aligned as close as possible to the center
line of the ship.
Figure: Antenna Heading Alignment
BOW
Direction
Front View
Bottom View
Cable Entry
Radome Hatch
In Use
Radome Hatch
(Optional: for Duct
Hatch Assembly)
BOW
Direction

15
Planning Installation
Min. 15 mm (0.59") Max. 25 mm (0.98")
1000 mm (39.37")
247.5 mm (9.74")
247.5 mm (9.74")
Ø650 mm (25.59")
Ø650 mm (25.59")
Ø300 mm (11.81")
350 mm (13.78")
10 mm (0.39")
170 mm
(6.69")
50 mm (1.97
")
50 mm (1.97
")
30 mm
(1.18")
180 mm
(7.09")
180 mm
(7.09")
200 mm
(7.87")
220 mm
(8.66")
42 mm (1.65")
280 mm (11.02")
Ø22 mm (0.87"
)
Ø22 mm
(0.87")
45°
160 mm
(6.30")
50 mm
(1.97")
280 mm
(11.02")
180 mm
(7.09")
10 mm (0.39")
4-Ø14 mm (0.55") Holes
Figure: Recommended Size of Mast
BOW
Direction
Mast Designing (Installation Example)
The ADU mast must be designed to carry the weight of the ADU unit. The mast must also be able to withstand
on-board vibrations and wind speeds on the radome.
When Placing Cable Outside Mast

16
Planning Installation
Antenna Mounting Hole Pattern
The mounting holes must be in the exact same place as shown in the diagram below.
Figure: Antenna Mounting Hole Pattern
247.5 mm (9.74")
4-Ø14 mm (0.55"
) Holes
Ø650 mm (25.59")
247.5 mm (9.74")
BOW
Direction

17
Planning Installation
Preparing Installation
The antenna installation requires extreme precaution and safety measures given its size and weight. Failure to
follow the correct installation process may lead to injury of the installer and/or cause damage to the system.
In order to maximize the performance of the system, a thorough review of this installation guide is strongly
recommended, as well as executing the installation process as it is noted in this manual.
Selection of Installation Site
The system should be placed in an area onboard the vessel with little to no RF signal blockage. When the antenna
is transmitting, obstacles in way of the beam path will cause decreased satellite signal strength. The antenna
unit should have direct line-of-sight with the desired satellite without any obstacles in the beam path. Certain
minimum distances between the antenna and other onboard devices must also be considered during installation.
Minimize Satellite Blockage
Install the antenna in accordance with the following procedures to ensure maximum performance of the
antenna. The ideal antenna site should have a clear view of the horizon or satellite with all around clearance.
Please be sure there are no obstacles within the EL range -20° to +115° from the center of the antenna.
Obstacles can prevent the antenna from transmitting and receiving the satellite signal.
Figure: Elevation Limit of Obstacles
Obstruction
Look angle
-20° to +115°
Antenna Unit

18
Planning Installation
Avoid RF Interference
Do not install the antenna near the high power shortwave radar. Most radar transmitters emit RF energy within
an elevation range of -15° to +15°. For this reason, It is recommended to position the antenna at least 15 feet
(4.6 m) away from the radar.
Figure: Potential RF Interference
WARNING
WARNING
Never place the antenna in the beam path of the radar regardless of distance. The high power
shortwave radar may impair its performance or damage the antenna.
Figure: RF Hazard Precautions
RF Hazard Precautions
The antenna is designed to be used with radiation transmitting equipment manufactured by others. Exposure
to RF radiation, including exposure associated with an improper use of the transmit equipment, may be
hazardous to persons close to the above deck unit. Ensure the safety of personnel who work on the system.
During transmission, ensure to keep the minimum safety distance. The recommended minimum safety
distance to the reector on the focal line is about 15 m, based on a radiation level of 5 mW/cmthat applies
under occupational/controlled environment. No hazard exists >20° below the antenna's mounting plane.
Radar
+15°
-15° Minimum
4.6m
Antenna
Antenna
Antenna
20° 20°
15m (49 ft) 15m (49 ft)
Radiation Safety Distance

19
Planning Installation
Preparing System Cables
Before installing the system cables, you need to take the following points into consideration.
1. All cables need to be well clamped and protected from physical damage and exposure to heat and humidity.
2. A cable with an acute bend should be avoided.
3. Wherever a cable passes through an exposed bulkhead or deck head, a watertight gland or swan neck
tube should be used.
For cables that run longer than Intellian's recommendations, please consult Intellian Technologies.
• RF Cable (Customer Supplied)
Due to the signal losses across the length of the RF coax on L-Band, Intellian recommends the following 50
ohm coax cable types for standard system installations. For cables that run longer than 120 meters (except
LMR600 coaxial cable type), please consult Intellian Technologies.
* The Maximum DC Resistance of RF Cable is 0.8 Ohm.
* Tightening Torque Value: N Type Connector, 1.5 N-m
Coaxial Cable Type Attenuation in dB/100m
(@ 2 GHz)
Attenuation in dB/m
(@ 2 GHz)
Recommended
Max. Cable Length
LMR400 19.6 0.196 80 m
LMR600 12.8 0.128 120 m
• AC Power Cable (Customer Supplied)
Intellian recommends the following size of the AC power cable for standard system installations.
Cable Length Cable Cross Sectional Area AWG (American Wire Gauge) Size
Up to 100 m 2.62 mm 13
Up to 200 m 4.17 mm 11
• Gyrocompass Cable (Customer Furnished)
Due to the environment of various types of vessels, Intellian recommend the general cable types compatible with
the antenna.
NMEA 2000 NMEA 0183
Connector Type Mini-C 5 pin connector 2 pin terminal block connector
Cable Type 5 wires within a single cable 2-wires constructed with one
enclosed shield cable
Heading Information Supports PGN, 127250: Vessel
Heading
Supports $HEHDT , baud rate 4800,
format 8N1 as standard.

20
Planning Installation
Placing Cable on Mast
The cable must be routed from the antenna and through various areas of the ship to end up at the antenna
control unit. When pulling the cables in place, avoid sharp bends, kinking, and excessive force. After
placement, seal the deck penetration gland and tie the cable securely in place. The cable bracket must be
installed on the mast to x the relevant cable. The gooseneck must be installed on the side of the mast to
protect the relevant cable against water.
1. Place the cables from the gooseneck labeled on the
deck to the antenna as shown in the picture.
2. Maintain a sufcient cable length (more than 2M) from
the surface of the mast. After connecting the cables to
cable connector on the unit inside the radome, adjust
the cable length and then x the cables on the cable
brackets by using cable ties.
WARNING
WARNING
Ensure that cable has been run through watertight ttings to prevent water entry into the vessel when
installation is completed.
Figure: Cabling on Outside of Mast
Sufcient Cable
Cable Brackets
Gooseneck
To Belowdecks