Intellinet 525831 User manual

intellinetnetwork.com
Manageable Wireless AC1300
Dual-Band Gigabit PoE Indoor
Access Point and Router
User Manual
Mo del 52 5831 (IW-1300AC-AP)
Important: Read before use. • Importante: Leer antes de usar.
Questo manuale d’istruzione è fornito da trovaprezzi.it. Scopri tutte le offerte per Intellinet 525831 o
cerca il tuo prodotto tra le migliori offerte di Wireless e Bluetooth

2
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router User Manual
CONTENTS
Product Introduction ...................................................................................................................................................... 3
Product Overview ........................................................................................................................................................... 3
Features .......................................................................................................................................................................... 3
Package Contents ......................................................................................................................................................... 3
Hardware Connection ................................................................................................................................................... 3
Front Panel ...................................................................................................................................................................... 3
Interface panel............................................................................................................................................................... 3
Installation ...................................................................................................................................................................... 4
Configure Router through PC ........................................................................................................................................ 4
Logon Screen ................................................................................................................................................................. 6
Common Interface Buttons and Operations................................................................................................................ 8
Status .............................................................................................................................................................................. 8
Overview ......................................................................................................................................................................... 9
System Log...................................................................................................................................................................... 9
Kernel Log ..................................................................................................................................................................... 10
Processes ...................................................................................................................................................................... 10
Status>Realtime Graphs>Load.................................................................................................................................... 11
Status>Realtime Graphs>Connections....................................................................................................................... 11
System........................................................................................................................................................................... 12
System........................................................................................................................................................................... 12
Administration .............................................................................................................................................................. 14
Backup/Flash Firmware ............................................................................................................................................... 14
Action............................................................................................................................................................................ 14
Configuration................................................................................................................................................................ 15
Reboot ......................................................................................................................................................................... 15
AC Server ..................................................................................................................................................................... 16
Network......................................................................................................................................................................... 16
Interfaces ...................................................................................................................................................................... 16
Network>Interfaces>LAN.............................................................................................................................................. 17
Common Configuration .............................................................................................................................................. 17
DHCP Server.................................................................................................................................................................. 18
Network>Interfaces>WAN ............................................................................................................................................ 18
Wi-Fi ............................................................................................................................................................................... 22
Network>Wifi>wifi0: Master “11n_0007”........................................................................................................................ 23
Device Configuration ................................................................................................................................................... 24
DHCP and DNS ............................................................................................................................................................. 26
Server Settings .............................................................................................................................................................. 26
Active DHCP Leases ..................................................................................................................................................... 28
Firewall .......................................................................................................................................................................... 29
Network>Firewall>General Settings ............................................................................................................................. 29
Regional “newzone”..................................................................................................................................................... 31
Inter-Zone Forwarding .................................................................................................................................................. 32
Network>Firewall>Port Forwards .................................................................................................................................. 32
Network>Firewall>Traffic Rules...................................................................................................................................... 33
Network>Firewall>Custom Rules.................................................................................................................................. 35
Logout........................................................................................................................................................................... 35
Appendix:Technical Specifications ........................................................................................................................... 36
Notes ............................................................................................................................................................................. 37
Additional Information ................................................................................................................................................. 38

3
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router
Product Introduction
Thank you for your purchase of the AC1300 Wireless Wave2 High Power Dual Band Gigabit PoE Router. Please
read the entire user manual before using the product and save it for future reference.
Product Overview
This Wireless Router is based on the 802.11ac standard, providing up to 1.3 Gbps wireless data transmission rate. If features a built-in high-power wireless
signal amplifier, supports Wave 2, provides remote transmission, full coverage and strong signal penetration. The ceiling-type installation design provide
wireless up to 1.3 Gbps, three times that of standard wireless Internet. The router’s dual-band concurrency technology helps avoid interference. Both
bands have power amplifiers to provide faster download speeds, smoother video playback and a better online gaming experience to end users. It
provides an integrated router, Wi-Fi access point, a two-port gigabit switch and fire wall functions in one compact, sturdy design. With convenient and
comprehensive network management functions, URL filtering, MAC address filtering and the QoS bandwidth control function, this router effectively
allocates the client’s download rate. It supports wireless data encryption and can guarantee the security of data transmission in wireless network.
Features
• Two 10/100/1000 Mbps LAN ports & one 10/100/1000 Mbps WAN port
• IEEE802.3at PoE power supply function
• Ceiling-type installation design
• Dual 2.4 / 5 GHz bands for fast speeds and more client access
• Standard IEEE802.11a/b/g/n/ac, supports Wave 2
• Up to 1.3 Gbps throughput that automatically adjusts its wireless transmission rate
• Built-in omni-directional antenna to effectively improve wireless signal quality
• Automatic best-channel selection to avoid co-channel interference and improve network stability
• A variety of measures to ensure network security, including 64/128-bit WEP, WPA / WPA2, WPA-PSK / WPA2-PSK encryption and security mechanism
• MAC address-based access control to effectively control access rights and support local and remote Web management
Package Contents
Before installing the Router, make sure that the following items are included in your packaging. If any part is lost or damaged,
please contact your place of purchase. In addition, make sure that you have the tools to install the Router safely.
• One AC1300 Wireless Wave2 High Power Dual Band Gigabit PoE Router
• One set of installation components
• One power adapter
• One User Manual
Hardware Connection
Front Panel
The front panel of the Router consists of a series of LED indicators as shown:
The LED Indicators on the front panel show the status of the Router.
Name Status Indication
Power
Off Power is off
On Power is on
5G Wi-Fi
Off The wireless function is disabled
Flashing The wireless function is enabled
2.4G Wi-Fi
Off The wireless function is disabled
Flashing The wireless function is enabled
Interface panel
Figure 3: rear panel
WAN: 10/100/1000 Mbps RJ45 port to connect the Cable/xDSL Modem or other LAN; LED connection-status indicator is on the upper right corner of the port

4
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router User Manual
LAN 1 – 2: two LAN ports to connect networked devices, such as PCs, print servers, remote hard drives, and any other
compatible device to put on the network; LED connection-status indicator is on the upper right corner of the port
USB: the USB port provided for a 3G USB modem card to connect to the Internet or connect a USB storage device
DC: when PoE cannot be supplied, connect this port to the 12 VDC / 1.5 A power supply adapter
Installation
Before installing the Router, make sure the PC is successfully connected to the Internet through broadband service.
For any problem, please contact your ISP. Install the Router according to the following steps.
1 Make sure all devices, including your PCs, modem and Router are powered off.
2 Using an Ethernet network cable, connect the LAN or Ethernet network port of the cable or xDSL modem to the Router’s WAN port.
3 Power on the cable or xDSL modem, and power on the PC you wish to use to configure the Router.
4 Connect the power adapter to the Router and to an electrical outlet.
5 Setup via Computer
Configure Router through PC
1 On your computer desktop, right click on“Network”and select“Properties.”
2 Click on“Local Area Connection.”

5
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router
3 Click on“Properties.”
4 Select “Internet Protocol Version 4 (TCP/IPv4),” and then click “Properties.”

6
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router User Manual
5 Choose to obtain an IP address automatically or manually set your IP address using the“use the following IP
address”option. Then, choose to automatically assign a DNS server or to set it manually:
6 Use the following IP address:
IP address: 192.168.1.XXX: (XXX is a number from 2 – 254)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DNS Server: input the DNS server address provided by the ISP, or use the router default gateway as the DNS proxy server; click“OK” to save the configuration
Click OK to save the setting.
If the DNS server address is unknown, it is recommended to choose“Obtain an IP address automatically” and “Obtain DNS server address automatically.”
Logon Screen
Log into the Router:
1 Open a browser window and enter http://192.168.1.1 in the address bar.

7
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router
2 The username is“root”, password is “admin”. Click on the“Login,” and the login page follows:
3 Once logged in, click the menu on the left side of the home page to go to the corresponding sub-page.

8
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router User Manual
Common Interface Buttons and Operations
Button Meaning
Save and Apply current configuration information
Save current configuration information
Restore factory settings
Reconnect this interface
Shutdown this interface
Edit this interface
Shutdown this interface
Delete this interface
Add
Synchronize local time with browser time
Back up the current system profile
To restore configuration files, upload a
previously generated backup archive here
Restore factory settings
Select file
Function Configuration
Status
Click the“Status”tab to view Overview, System Log, Kernel Log, Processes and Realtime Graphs.

9
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router
Overview
Click on the“Status>Overview”option for the following interface:
This interface shows“System”information (Hostname, Model, Firmware Version, Kernel Version, Local Time, Uptime, Load Average),“Memory”
information (Total Available, Free, Cached, Buffered),“Network” information (IPv4 WAN Status, IPv6 WAN Status, Active Connections),
“DHCP Leases”information,“DHCPv6 Leases”information, “Wireless”information, and“Associated Stations”information.
System Log
Click on the“Status>System Log”option for the following interface:
This interface offers a log of link establishment failures, packet filter log information, etc. By logging into the log host, the system administrator
can analyze and understand log events. Logs can help administrators locate faults, troubleshoot, and also help manage network security.

10
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router User Manual
Kernel Log
Click on the“Status>Kernel Log”option for the following interface:
This interface shows the live system log.
Processes
Click on the“Status>Processes”option for the following interface:
This interface shows system processes and their status. It also includes options to suspend/
hang up, terminate and, when terminate is non-responsive, kill operations.

11
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router
Realtime Graphs
Click the“Status>Realtime Graphs”option to see Load, Traffic, Wireless and Connections options.
Status>Realtime Graphs>Load
Click the“Status>Realtime Graphs>Load” option for the following screen:
Status>Realtime Graphs>Connections
Click the“Status>Realtime Graphs>Connections” option to see Realtime Connections information.

12
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router User Manual
System
Click on“System” to see options for System, Administration, Backup/Flash Firmware, Reboot, and AC Server.
System
Click the“System>System”option to set System Properties and Time Synchronization.
System Properties
System Properties are divided into“General Settings,”“Logging”and “Language and Style”options.
Click on the“General Settings”option for the following interface:

13
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router
Local Time: click “Sync with browser”to synchronize the system time with the time on your computer
Hostname: provide a router name
Timezone: select the desired time zone from the drop-down list
Click on the “Logging” option for the following interface:
System log buffer size: specify the size of the log buffer
External system log server: configure a remote host to receive log information
External system log server port: configure a suitable port for the remote log server
Log output level: select the level of output log to include Debug, Info, Notice, Warning, Error, Critical, Alert or Emergency
Cron Log Level: select the level of Cron Log to include Debug, Normal and Warning
Click on the“Language and Style”option for the following interface:
Language: select the language used by the router management interface; offers three options: auto (based on your computer’s language), English and Chinese.
Time Synchronization: interface settings, as follows —

14
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router User Manual
Enable NTP client: enables the Local Time of the router to be synchronized with the NTP servers
Provide NTP server: enables the router to work as an NTP server to provide time parameters to any requesters
Administration
Click on the“System>Administration”option for the following interface:
Password: Change the administrator password used to access the router; see warnings on password
compliance at the end of the field and address requirements till resolved
Confirmation: verify the new password
Click“Save & Apply”for settings to take effect.
Backup/Flash Firmware
Click the“System>Backup/Flash Firmware” option to see Action and Configuration options.
Action
Click“System>Backup/Flash Firmware>Action”option for the following interface:
Download backup: to download a TAR archive of the current configuration files — upgrading the firmware of the router or changing its settings
may delete the current configuration; save the current configuration files to easily restore the router to the original configuration if necessary

15
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router
Reset to defaults: click the“Perform reset” button to restart the router and restore its settings to the factory default state (Includes:
the default user name: root; default password: empty; default IP address: 192.168.1.1; default netmask: 255.255.255.0)
Note: back up the configuration before restoring to factory-default settings; if necessary, load the backup configuration file to restore the router to its original state
Restore backup: click“Browse”to find the backup file; select the file and click “upload archive”to complete the recover configuration
Keep settings: check the box to write new firmware immediately while retaining the original system configuration;
if unchecked, new firmware written to the flash memory will erase the original configuration
Image: click“Browse” to find the new firmware file; select the new firmware file, then click on the “Flash image”to flash the new firmware operation.
Configuration
Click“System>Backup/Flash Firmware>Configuration” option for the following interface:
Click“Open list”for a list of files to be backed up. The configuration file contains the necessary foundation files and user-defined files to be backed up.
Reboot
Click on the“System>Reboot”option for the following interface:
Click“Perform reboot” to manually restart the router. Some settings may require a manual reboot of the router to take effect.
Functions that automatically restart the router after settings are changed:
• Immediately writing new router firmware
• Restore the router’s factory settings
• Modify the basic network parameters of the LAN port
Functions that require a manual restart of the router to take effect:
• Set QSS security settings function
• Set DHCP services
• Set a static address assignment DHCP server function
• Set the basic parameters of the wireless network
• Modify the security settings of the wireless network
• Modify advanced settings of the wireless network
• Web modify remote router management port

16
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router User Manual
AC Server
Click on the“System>AC Server”option for the following interface:
AC Server Mode: Change the management mode for controlling the AP device.
Network
Click“Network” for options on Interfaces, Wifi, DHCP and DNS, and Firewall.
Interfaces
Click the“Network>Interfaces”option for the following screen:
On this page, select and set WAN or LAN preferences.

17
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router
Network>Interfaces>LAN
Click the“Network>Interfaces>LAN” option to configure the network interfaces (LAN).
Common Configuration
The“Common Configuration”screen is as follows:
Set the IP address and netmask. You can, then, manage the router via this IP address. Or if not needed, keeps the default values.
Protocol: select the protocol type
IPv4 address: enter the router’s IP address on the LAN; the IP address of all computersin the LAN must be in the same network segment and the
default gateway is this IP address; the factory default IP address is 192.168.1.1; for Class C IP addresses; change it according to network needs
IPv4 netmask: here, you can set the relevant netmask
IPv4 gateway: enter this router on the LAN gateway; the default is 192.168.1.1
Use custom DNS servers: the DNS address provided by your ISP; if not provided, the default is 192.168.1.1

18
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router User Manual
DHCP Server
The DHCP Server setting interface is as follows:
Ignore interface: Check this box to disable this DHCP function for the interface.
Network>Interfaces>WAN
Click the“Network>Interfaces>WAN”option to enter the WAN port settings interface.
Selectable options for the Protocol: Static address, DHCP client, PPPoE, Unmanaged, PPP.
Static address
If the “static address”protocol is selected, provide the following information according to the supplier’s (ISP) requirements. Click the“Save & Apply”button.

19
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router
Ipv4 address: the router’s IP address on the WAN; enter the public IP address provided by your ISP
Ipv4 netmask: the netmask for the WAN interface; enter the netmask provided by your ISP
Ipv4 gateway: fill in the gateway provided by the ISP
Use custom DNS server: fill with information provided by your ISP’s
Override MAC address: the default value is the MAC address of the WAN interface of this router; some ISPs may require MAC
address binding, and the ISP will provide a valid MAC address to the user; in this case, input the provided value in the“MAC
address”column; changing the MAC address is not recommended unless the ISP has special requirements
Override MTU: the default value is 1500
DHCP client: select “DHCP client” protocol and enter the MAC address of the computer as the modem MAC address of the router; click the “Save & Apply”button.
Hostname to send when requesting DHCP: enter the host name of this feature
Use broadcast flag: use this option according to ISP
Use default gateway: if unchecked, no default route is configured
Use DNS servers advertised by peer: if unchecked, the advertised DNS server address is ignored
Use gateway metric: for every gateway (e.g., router), the metric is increased by 1
Client ID to send when requesting DHCP: the identity number of the router that is used while obtaining the WAN IP address from ISP
Vendor Class to send when requesting DHCP: the vendor class of the router that is used while obtaining the WAN IP address from ISP
Override MAC address: the default value is the MAC address of the WAN interface of this router; some ISPs may require MAC
address binding, and the ISP will provide a valid MAC address to the user; in this case, input the provided value in the“MAC
address”column; changing the MAC address is not recommended unless the ISP has special requirements
Override MTU: the default value is 1500
Protocol: if“Unmanaged” is selected, there is no need to set.

20
Manageable Wireless AC1300 Dual-Band Gigabit
PoE Indoor Access Point and Router User Manual
PPP
PPP (Point-to-Point Protocol) is a link-layer protocol. This link provides full-duplex operation and transfers data packets
in order. It is designed primarily to establish a point-to-point connection in sending data via dial-up or leased line
mode, making it a common solution. If PPP Internet mode is chosen, click the “Save & Apply” button.
PAP/CHAP username, PAP/CHAP password: enter your ISP username and password
Use Default Gateway: if unchecked, no default route is configured
Use gateway metric: for every gateway (e.g., router), the metric is increased by 1
Use DNS server advertised by peer: if unchecked, the advertised DNS server addresses are ignored
LCP echo failure threshold: Link Control Protocol (LCP) is a subset of the PPP agreement
LCP echo interval: send LCP echo requests at the given interval in seconds (only effective in conjunction with failure threshold)
Inactivity Timeout: close an inactive connection after a given number of seconds; use 0 for persistent connections
Override MTU: the default value is 1500
PPPoE: If“PPPoE”protocol is selected, click the“Save & Apply”button