Intermec EasyCoder 601XP User manual

EasyCoder 501 XP/601 XP
Important Information
UBI has launched a new hybrid thermal transfer ribbon better adapted to the special demands of EasyCoder 501 XP and
EasyCoder 601 XP than the HP04 ribbon mentioned in the present manuals. The new ribbon is designated HP66. This
makes some of the information in the Installation & Operation manuals and the EasySet Bar Code Wand Setup booklet
obsolete. The correct information should read as follows:
EasyCoder 501 XP Installation & Operation Ed. 1 (Part No. 1-960426-01)
Chapter 7 “Setting Up the Printer”, page 62:
EasyCoder 501 XP Installation & Operation Ed. 1 (Part No. 1-960426-01)
Appendix 2 “Media Specifications”, page 106:
continued!
Thermal Transfer
Ribbon Receiving Ribbon Ribbon Label Max Rec. Print Speed
Type Material Constant Factor Offset Picket Fence Bar Code Ladder Bar Code
GP02 Vellum 95 15 0 200 200
Matte Coated 90 95 15 0 300 200
Transfer Premium 75 15 0 300 300
HP07 Matte Coated 90 110 25 0 300 200
Transfer Premium 90 25 0 300 200
Polyethylene Matt 90 25 0 200 200
HP66 Matte Coated 90 110 25 0 300 200
High Gloss White 110 25 0 300 200
Polyethylene Gloss 100 25 0 200 200
Transfer Premium 90 25 0 300 250
Polyethylene Matt 90 25 0 200 200
HR03 Polyester Gloss 100 30 0 250 200
Quality Name Width Length: Face Material Rolls/Box Part. No.
Wax GP02 58 mm (2.28") 450 m (1475 ft.) Vellum 20 1-970645-01
Wax GP02 88 mm (3.46") 450 m (1475 ft.) Vellum 20 1-970645-10
Wax GP02 110 mm (4.33") 450 m (1475 ft.) Vellum 10 1-970645-20
Hybrid General HP07 60 mm (2.36") 450 m (1475 ft.) Matte Coated 90 10 1-970646-27
Hybrid General HP07 89 mm (3.50") 450 m (1475 ft.) Matte Coated 90 10 1-970646-17
Hybrid General HP07 110 mm (4.33") 450 m (1475 ft.) Matte Coated 90 10 1-970646-07
Hybrid Special HP66 45 mm (1.77") 450 m (1475 ft.) Multipurpose
1
20 1-970646-64
Hybrid Special HP66 60 mm (2.36") 450 m (1475 ft.) Multipurpose
1
20 1-970646-63
Hybrid Special HP66 90 mm (3.54") 450 m (1475 ft.) Multipurpose
1
20 1-970646-62
Hybrid Special HP66 110 mm (4.33") 450 m (1475 ft.) Multipurpose
1
10 1-970646-61
Resin HR03 45 mm (1.77") 450 m (1475 ft.) Synthetic 50 1-970647-30
Resin HR03 60 mm (2.36") 450 m (1475 ft.) Synthetic 20 1-970647-20
Resin HR03 90 mm (3.54") 450 m (1475 ft.) Synthetic 20 1-970647-10
Resin HR03 110 mm (4.33") 450 m (1475 ft.) Synthetic 10 1-970647-02
1
/. HP66 is suited for Matt Coated 90, Semigloss, High Gloss White and Synthetic face materials.
Ribbon Types
EasyCoder 501XP/601 XP
Important Information
Edition 1, August 1997
Part No. 1-960439-00
NEW!
NEW!

NEW!
EasyCoder 601 XP Installation & Operation Ed. 1 (Part No. 1-960430-01)
Chapter 7 “Setting Up the Printer”, page 59:
EasyCoder 601 XP Installation & Operation Ed. 1 (Part No. 1-960430-01)
Appendix 2 “Media Specifications”, page 106:
EasyCoder 501XP/601 XPEasySet Bar Code Wand Setup Ed. 1 (Part No. 1-960438-00)
Page 6:
In “Paper Type”, the bar code interpretations (the plain text below each code) should read:
Incorrect Correct
HP04/Matte Coated →HP66/Matte Coated 90
HP04/High Gloss White →HP66/High Gloss White
HP04/Polyethylene Gloss →HP66/Polyethylene Gloss
HP04/Transfer Premium →HP66/Transfer Premium
HP04/Polyethylene Matt →HP66/Polyethylene Matt
Note that the setup values contained in the bar code pattern are valid for HP66.
Thermal Transfer
Ribbon Receiving Ribbon Ribbon Label Max Rec. Print Speed
Type Material Constant Factor Offset Picket Fence Bar Code Ladder Bar Code
GP02 Vellum 95 15 0 200 150
Matte Coated 90 95 15 0 225 150
Transfer Premium 75 15 0 225 225
HP07 Matte Coated 90 110 25 0 225 150
Transfer Premium 90 25 0 225 200
Polyethylene Matt 90 25 0 200 150
HP66 Matte Coated 90 110 25 0 225 200
High Gloss White 110 25 0 225 225
Polyethylene Gloss 100 25 0 200 150
Transfer Premium 90 25 0 225 225
Polyethylene Matt 90 25 0 200 150
HR03 Polyester Gloss 100 30 0 225 225
Quality Name Width Length Face Material Rolls/Box Part. No.
Wax GP02 58 mm (2.28") 450 m (1475 ft.) Vellum 20 1-970645-01
Wax GP02 88 mm (3.46") 450 m (1475 ft.) Vellum 20 1-970645-10
Wax GP02 110 mm (4.33") 450 m (1475 ft.) Vellum 10 1-970645-20
Wax GP02 154 mm (6.06") 450 m (1475 ft.) Vellum 10 1-970645-40
Wax GP02 166 mm (6.53") 450 m (1475 ft.) Vellum 10 1-970645-50
Hybrid General HP07 60 mm (2.36") 450 m (1475 ft.) Matte Coated 90 10 1-970646-27
Hybrid General HP07 89 mm (3.50") 450 m (1475 ft.) Matte Coated 90 10 1-970646-17
Hybrid General HP07 110 mm (4.33") 450 m (1475 ft.) Matte Coated 90 10 1-970646-07
Hybrid General HP07 165 mm (6.49") 450 m (1475 ft.) Matte Coated 90 10 1-970646-57
Hybrid Special HP66 45 mm (1.77") 450 m (1475 ft.) Multipurpose
1
20 1-970646-64
Hybrid Special HP66 60 mm (2.36") 450 m (1475 ft.) Multipurpose
1
20 1-970646-63
Hybrid Special HP66 90 mm (3.54") 450 m (1475 ft.) Multipurpose
1
20 1-970646-62
Hybrid Special HP66 110 mm (4.33") 450 m (1475 ft.) Multipurpose
1
10 1-970646-61
Hybrid Special HP66 165 mm (6.49") 450 m (1475 ft.) Multipurpose
1
10 1-970646-60
Resin HR03 45 mm (1.77") 450 m (1475 ft.) Synthetic 50 1-970647-30
Resin HR03 60 mm (2.36") 450 m (1475 ft.) Synthetic 20 1-970647-20
Resin HR03 90 mm (3.54") 450 m (1475 ft.) Synthetic 20 1-970647-10
Resin HR03 110 mm (4.33") 450 m (1475 ft.) Synthetic 10 1-970647-02
Resin HR03 154 mm (6.06") 450 m (1475 ft.) Synthetic 10 1-970647-40
Resin HR03 166 mm (6.53") 450 m (1475 ft.) Synthetic 10 1-970647-50
1
/. HP66 is suited for Matt Coated 90, Semigloss, High Gloss White and Synthetic face materials.
Ribbon Types
NEW!