InTouch KIO420L User manual

KIO420L USER MANUAL
COPYRIGHT 2020- INTOUCH SCREENS
1229
1027
500 802
516
KIO420L - 42.0 inch Touch Screen Display Kiosk
1920 x 1080 Resolution
42.0 inch Active Area - 931 x 524 mm
16:9 Aspect Ratio
Overall Dimensions: 1229H x 1027W x 516D
Product data available in DXF and 3D PDF formats
278
64 241
Mounting holes to suit
M10 Fasteners
50.0°
500

KIO420L SPECIFICATIONS
Touch Screen INDT420
1
• 42” active viewable area
• 10-point PCAP multi-touch
• VGA & HDMI input
• 1920 x 1080 Resolution
• Compatible with Windows 7,
8 & 10
COPYRIGHT 2020- INTOUCH SCREENS
1229
1027
500 802
516
KIO420L - 42.0 inch Touch Screen Display Kiosk
1920 x 1080 Resolution
42.0 inch Active Area - 931 x 524 mm
16:9 Aspect Ratio
Overall Dimensions: 1229H x 1027W x 516D
Product data available in DXF and 3D PDF formats
278
64 241
Mounting holes to suit
M10 Fasteners
50.0°
500
KIOSK BODY
2
• Robust steel construction
• Durable powder-coated nish
• Tamper resistant side access panel
• Australian designed, manufactured
& supported
CABLING INFORMATION
Step 1. Connect your desired
display cable.
Step 2. Connect screen
USB cable.
Step 3. Connect your PC power
cable
HDMI VGA
The powerboard will be located on the interior of
the kiosk body. This position can vary depending
on what PC is being used.
Touch Screen
Fan
{

KIO420L - OPENING SIDE PANEL
4x M4 Allen Key Screws
To access the inside of the kiosk
you will need to remove the four
screws shown using an allen
key. (Note: Make sure to support
the pannel while removing the
screws so it does not fall)
SCREEN MOUNTING
Note: When lowering the screen into place be careful
not to clamp any of the cables between the screen
and the kiosk housing.
Step 1. Position the screen in the same
orientation shown in the diagram
with cables pointing down.
Step 2. Connect your cables outlined in
cabling information.
Step 3. Lower the screen onto the threaded
studs (being careful to not clamp
any cables) and tighten the wing nuts
to x the screen in place.

CLEANING INSTRUCTIONS
WARRANTY
Applicable to touch screens and kiosks:
InTouch suggests using an isopropyl alcohol spray and clean microbre cloth.
Caution: Be careful when cleaning your kiosk to avoid vinyled graphic areas so as not
to damage the artwork. DO NOT use abrasive cleaners, solvents or cloths.
For more information please visit www.intouchscreens.com.au/cleaning
FOR MORE INFORMATION
For more information please visit www.intouchscreens.com.au/warranty
Visit our Website
Telephone [phone]
suppor[email protected].au
[e-mail]
www.intouchscreens.com.au
SECURING YOUR KIOSK TO THE FLOOR (OPTIONAL)
For further information on securing your
kiosk, do not hesitate to contact us on
suppor[email protected].au
COPYRIGHT 2020- INTOUCH SCREENS
1229
1027
500 802
516
KIO420L - 42.0 inch Touch Screen Display Kiosk
1920 x 1080 Resolution
42.0 inch Active Area - 931 x 524 mm
16:9 Aspect Ratio
Overall Dimensions: 1229H x 1027W x 516D
Product data available in DXF and 3D PDF formats
278
64 241
Mounting holes to suit
M10 Fasteners
50.0°
500