Intralot PHOTON Manual

INTRALOT PHOTON TERMINAL SET UP INSTRUCTIONS
TRAINING MODE
Once your Photon Terminal has been installed, you may use the training mode at any time to familiarize yourself and
your team with the device. In the TERMINAL TAB, press the TRAINING MODE button. Confirm your selection. Press
the SIGN IN button and enter in the last 6 digits of the retailer number for the user ID and 9999 for the passcode. To
exit training mode, simply press the SIGN OFF button and confirm your selection.
THE COMPLETE PHOTON FAMILY
From left to right: Genion, Accelerated Modem, Photon Terminal, Barcode Reader, Printer, and Player Advertisement Display
EQUIPMENT LIST
Photon Terminal Package Printer TSP-L10 Package
1. Photon Terminal (1 pcs) 1. Printer TSP-L10 (1 pcs)
2. BRC Case Holder (1 pcs) 2. Printer Power Cable (1 pcs)
3. 2D Barcode Scanner (1 pcs) 3. Printer Power Supply Adaptor (1 pcs)
4. Light Proof Shield (2 pcs) 4. USB Cable (1 pcs)
5. Photon AC Cord (1 pcs)
6. Photon Adapter 12V 12.5A (1 pcs) Genion Package
1. Genion Lite (1 pcs)
Accelerated Modem Package 2. Genion Power Cable (1 pcs)
1. Accelerated Modem (1pcs) 3. Genion Power Supply Adaptor (1 pcs)
2.Modem Power Cable 4. LAN Cable for LAN Port 2
3. LAN Cable for LAN Port 1
Player Advertisement Display (PAD)
1. Power Cable
2. HDMI Cable
CABLES AND POWER CORDS
Photon Terminal AC Cord and Adaptor
Genion Power Cable and Adaptor

CABLES AND POWER CORDS
Printer Power Cable and Adaptor
LAN Cable (2pcs) for Accelerated Modem and Genion
Printer Power Cable
Printer Power Supply Adapter
Printer USB Cable
PAD HDMI CABLE
PHOTON TERMINAL CONNECTION DIAGRAM
Printer Keypad
Player Advertisement Display
Photon
Rear Panel
TP Link
Switch
Barcode
Scanner
Genion Ticket Checker
Wireless Modem