CLEMATIS®7
Always lift the wheelchair by gripping the frame at the
points shown in the diagram. Never lift the wheelchair
by the removable armrests or the foot-rests. Ensure
that the backrest and push handles are securely in
place. Also read the chapter: Safety instructions/
propelling techniques.
CAUTION AND WARNING
Failure to comply with instructions given may result
in personal injury and/or product damage.
-
chair is used:
– all parts are securely fastened to the frame.
– all handles and knobs are properly tightened.
–
that all brakes and anti-tip devices function
correctly
or by the footrests. Ensure that the backrest and
push bar are securely fastened to the chair.
chair’s balance the inclination to tip, forwards or
backwards, also changes.
not to trap your fingers.
parts of your body when tilting the wheelchair’s
back and seat.
so much so that the inside of the armrests press
against the side of the pelvis.
moved into or out of the chair.
stand on the footplates when getting in
or out of the chair, because of the risk of tip-
ping over.
We recommend that the chair should be fitted
with castor adapters when the seat is located in
its most forward position.
this may cause injury to your hands.
operated brake is reduced in wet and slippery
conditions, as well as when on a slope.
securely attached.
user is sitting in the chair.
Surfaces of the wheelchair like frame parts or
upholstery can reach temperature
> 41 degrees C if they have been exposed to the
sun during a longer period of time. .
LIFTING THE WHEELCHAIR
This symbol means warning
and is used throughout the
manual for information
that needs special attention
