INVENTOR G2INV-20A 2000W User manual
1
USER MANUAL
ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΗΣ
MANUALUL UTILIZATORULUI
GLASS PANEL HEATER
Model/-20A 2000W/1000W
WHITE/BLACK - - ALB/NEGRU
Thank you for choosing inventor® Glass Panel Heater.
Please read this manual carefully and keep it for
future reference.
V
i-l
2
GLASS PANEL HEATER WITH MECHANICAL CONTROL
A
(CU CONTROL MECANIC)
MODEL/: G2INV-20A 1000W/2000W
(WHITE--ALB/BLACK--NEGRU)
Please read and save these instructions!
V
3
BEFORE FIRST USE
Read and follow all the Instructions in this " even if you feel you are familiar with the
product, and find a place to keep it handy for future reference.
For your convenience record the complete model number (located on the product identification
plate) and the date you received the product, together with your purchase receipt and attach to the
warranty and service information. Retain in the event that warranty service is required.
NOTE: The rating of this product (as marked on the product identification plate) is based on specific
loading tests. Normal use or the use of other recommended attachments may draw significantly less
power.
IMPORTANT SAFEGUARDS
When using any electrically powered product, basic safety precautions should always be followed,
including the following:
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE PRODUCT.
WARNING - to reduce the risk of fire, electrical shock or injury to persons or property:
Read all instructions before using this appliance and keep them for future reference.
Use only the voltage specified on the rating plate of the heater.
Do not cover or restrict airflow to the inlet or exhaust grilles in any manner as the appliance
may overheat and become a fire risk.
Do not cover grilles, block entry or exhaust of airflow by placing appliance against any surface.
Keep all objects at least 1 meter from the front, side and rear of the appliance.
Do not place the appliance close to a radiant heat source.
Do not operate in areas where gasoline, paint or other flammable liquids are used or stored.
This appliance heats up when in use. To avoid burns, do not let bare skin touch hot surface.
Switch off and let cooling before moving.
Do not use the appliance to dry clothes.
Do not insert or allow foreign object or metal utensils to enter any ventilation or exhaust
opening, as this may cause an electric shock, fire or damage to the appliance.
Do not immerse in liquid or allow running into the interior of the appliance, as this could create
an electrical shock hazard.
Do not reach for an appliance that has fallen into water. Switch of at supply and unplug
immediately.
Do not operate any appliance with a damaged cord, plug or after the appliance malfunctions or
has been dropped or damaged in any manner. Return to a qualified electrical person for
examination, electrical or mechanical adjustment, service or repair.
Do not operate appliance with wet hands.
The most common cause of overheating is deposits of dust or fluff in the appliance. Ensure
these deposits are removed regularly by unplugging the appliance and vacuum cleaning air
vents and grilles.
Do not use this appliance in a window as rain may cause electric shock.
4
Do not use an abrasive cleaning product on this appliance. Clean with a damp cloth (not wet)
rinsed in hot soapy water only. Always remove plug from the mains supply before cleaning.
Do not connect the appliance to the mains voltage until completely assembled and adjusted.
This appliance is not intended for use in outdoor locations.
Do not use this appliance in the immediate surrounds of a bath, a shower or a swimming pool or
other liquids.
Always operate upright.
Switch off and let cooling before moving.
Do not operate with cord set coiled up as a build-up of heat is likely, which could be sufficient to
become a hazard.
The use of an extension cord with this appliance is not recommended.
Do not remove plug from power socket until the appliance has been switched off.
Do not remove plug from power socket by pulling the supply cord-always grip plug.
Always unplug appliance when not in use.
CAUTION: This product is NOT suitable to be used on long pile carpets or Flokati rugs.
Do not allow cord to come in contact with heated surface during operation.
Do not run cord under carpeting, throw rugs or runners etc. Arrange cord away from traffic
areas so that it will not be tripped over.
Do not twist, kink or wrap the cord around the appliance, as this may cause the insulation to
weaken and split. Always ensure that all cord has been removed from any cord storage area.
Do not use outdoors or whilst standing on a damp floor.
Do not store appliance while it is still hot.
This appliance is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure they do not play with the appliance.
The appliance must not be located immediately below a socket-outlet.
Do not use this appliance with another programmer, timer or any other device that switches the
heater on automatically, since a fire risk exists if the appliance is covered or positioned
incorrectly.
All covers of this appliance are intended to prevent direct access to the heating elements and
must be in place when the appliance is in use.
"WARNING: In order to avoid overloading, do not cover the heater."
To reduce the risk of electric shock, do not immerse or expose the product or flexible cord to
rain, moisture or any liquid other than those necessary for correct operation of the product.
The fireguard does not give full protection for young children and for infirm persons.
If the supply cord is damaged, it must be replaced by a qualified electrical person in order to
avoid a hazard.
Do not use this appliance outdoors, or on wet surfaces. Avoid spilling liquid on the appliance.
"CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this
appliance must not be supplied through an external switching device, such a timer, or
connected to a circuit that is regularly on and off by the utility."
Use this appliance only as described in this manual. Any other use is not recommended by the
manufacturer and may cause fire, electric shock or injury.
This appliance is intended for household use only and not for commercial or industrial use.
5
6
1. Operation Guide
1. 1 STARTING
1.1.1 Take out the heater from the carton carefully. Please save the carton for off season
storage.
1.1.2 Make sure the convector heater in OFF position before switching on.
1.1.3 Fixing the convector steadily according to the mounting instruction.
1.1.4 Its better not to use the same electric outlet with other high wattage electrical
appliances in order to avoid overloading your circuit.
1.2 POWER CONTROL
Plug in the convector, and then set the power selected switch "1(ON)"-"0(OFF)"
-"2 (ON)" switches to the 1 (on) and 2 (OFF), then the heater will work with power. If set
the switches to the 2(ON) and 1(OFF), the heater will work with "II" power.
1.3 TEMPERATURE CONTROL
Plug in the convector, rotating the knob to set the desired temperature. When the ambient
temperature is lower than the setting temperature, the convector starts to work, and the
heating light will be on; when it is higher than the setting temperature, the unit will
automatically switch to "STAND-BY" condition, and the heating light will be out.
2. Safety feature
The unit is equipped with a high limit switch; the heater will automatically shut off if it is in an
over-heating condition.
It will automatically come back to work when it cools down.
3. Cleaning behind the heater
It is very easy to clean behind it. Hold two sides of the heater, after upwards pull the heater
forwards, then you can clean behind.
After cleaning, the heater must be fixed in the normal position.
7
4. Warning
Do not cover the heater in order to prevent a fire.
5. Service
If you require a service, contact your local dealer or a qualified electrical appliance
maintenance company.
6. In case of any claim, your statutory rights are offended, contact your
supplier
REPLACEMENT OF SUPPLY CORD
If the supply cord is damaged, it must be replaced by a service agent or equivalent qualified
person otherwise it may cause a hazard.
SUPERVISION OF CHILDREN
Young children or infirm persons should not use the heater without supervision.
For Conservatories
A robust and practical choice for conservatories
The heater offers an energy efficient heating solution for conservatories. Built to a high
specification, the heater provides the perfect heating solution for conservatories where a
stylish yet robust appearance is required, and energy/cost control is demanded.
Stylishly constructed and elegantly finished in white, the heater, which is maintenance free,
will enhance every location.
The heater works in harmony with the Air Conditioning unit creating a perfect environment.
Features:
Simple and efficient usable controls
Space saving installation
Fixed economy temperature
Pre-set maximum comfort to 24° C
Tamperproof capability
Low capital cost
Maintenance free
Suitable For:
CONSERVATORIES HOTELS
PROPERTY DEVELOPMENT COMMERCIAL
STUDENT ACCOMMODATION
8
Specifications:
MODEL
POWER
L
H
L1
H1
(W)
mm
mm
mm
mm
G2INV-20A
BLACK/WHITE
2000/1000
830
400
250
254
9
10
IMPORT ANT SAFETY GUARD
1. Fixing the heater rightly on the wall or put the heater in the right position.
2. The heater is to be installed so that the controls cannot be touched by a person
using a bath or shower.
3. The heater is to be installed so that it is not located directly under a socket outlet.
4. When the heater is working as it is in free standing mode with the foot set, please do
not use it in the vicinity of bath, shower, or swimming pool.
5. When the heater is working as it is in wall mounted mode, do not touch the control
unit when using it in the vicinity of bath, shower or swimming pool.
6. Consult a qualified electrician or service technician if the power cord is damaged.
7. DO NOT cover the heater when it is working.
8. Always store the heater when not in use.
9. Make sure the heater has cooled down before store it away.
10. This heater is not equipped with a device to control the room temperature. Do not
use this heater in small rooms when they are occupied by persons not capable of
leaving the room on their own, unless constant supervision is provided.
11
,
service.
.
: (
)
.
, :
, :
.
.
.
,
.
.
.
,
.
service.
.
12
. (
)
.
.
, , .
.
.
.
.
, .
.
:
.
.
.
,
.
.
.
,
,
.
«:
13
,
,
.
,
"ΠΡΟΟΧΗ:
, ,
,
."
.
,
: 2000W/1000W
: 220~240V,50Hz
:830x75x400
14
1.
1. 1
1.1.1 .
.
1.1.2 OFF ()
1.1.3
1.1.4
.
1.2
, "1 (ON) - "O
(OFF)" - "2 (ON )" on 2 OFF,
(ON) 1
(0FF) "II".
1.3
,
.
,
.
, "STAND-BY",
.
2.
3.
15
3
4.
5. Service
service,
6.
,
.
:
24° C
16
:
L
H
L1
H1
(W)
mm
mm
mm
mm
G2INV-20A
2000/1000
830
400
250
254
17
18
1. .
2.
3. .
4. ,
5. ,
.
6.
7. .
8.
9.
10.
19
ÎNAINTE DE PRIMA UTILIZARE
-
cotarea acestui produs (du
pentru a reduce riscul de incendiu,
-
viitoare.
spate ale aparatului.
altele.
---
l muta.
Nu i
aparatului.
d în interiorul
poate crea pericol de electrocutare.
-
20
-
-voca electrocutare.
altor lichide.
O
rat.
Flokati.
ul departe de zonele de
-cablurile au fost
supraveghere.
Toate capacele acestui aparat sunt destinate prevenirii accesului direct la elementele de
produsului
This manual suits for next models
1
Table of contents
Languages:
Other INVENTOR Electric Heater manuals
Popular Electric Heater manuals by other brands
TESY
TESY CN04 MIS F Series Operation and storage manual
Trotec
Trotec IR 1500 SC instructions
Kiwi
Kiwi kht-8412 instruction manual
bemodern
bemodern 1122 Fire Installation and operating instructions
bemodern
bemodern 1434 User instructions
MrHeater
MrHeater BIG Buddy MH18B Operating instructions and owner's manual
Vanguard
Vanguard Flame-Max Birch Log Design OPERATING AND INSTALLATION Manual
Orion
Orion OWP15NB instruction manual
Dimplex
Dimplex T60W Installation and operating instructions
HeatQ
HeatQ NEX APP user manual
ATC
ATC SUNRAY S1000 Instruction for use, installation and assembly
RADtec
RADtec eRAD10R owner's manual