inVue LTO III User manual

LTO III
Laptop & Tablet Security
LTO1551

2 3
Read entire instruction guide before starting installation.
System Components
1. Laptop & Tablet Security
2. IR Key (not included)
3. Power connector (if powering up merchandise, order separately)
4. InVue or OEM Power Supply (if powering up merchandise,
order separately)
System Overview
The LTO III Laptop and Tablet Security protects all tablets
and laptops.
InVue IR Key
AF4400 or PK4400
Power Supply Power Connector
Laptop & Tablet Security
LTO1551

4 5
Attaching Merchandise
Laptop
(See page 5)
Tablet
(See page 10)
1Wipe display counter and back of merchandise with
alcohol wipe provided. Let it dry completely.
CONTENTS: One pad saturated in
Isopropyl Alcohol
75%
DIRECTIONS: Apply topically as
needed to cleanse surface mounting area.
FOR EXTERNAL USE ONLY
KEEP OUT OF REACH OF
CHILDREN
KEEP AWAY FROM EYES
AND FIRE

6 7
2 3
Remove white tab to activate battery. Snap cover onto
alarm module. Push down on cover until you hear a
“click.”
Remove clear film from adhesive on alarm module.
Confirm LTO cord is towards bottom of merchandise.
Center LTO alarm module on back of merchandise and
press firmly for at least 10 seconds.
Confirm LTO cord
is towards bottom
of merchandise.

8 9
4aAdhesive mount or screw mount fuse of laptop security
to display counter. Adhesive Mount: Remove clear film
from base of fuse end. Place on display counter and
press firmly for at least 10 seconds.
4bScrew Mount: Remove cover. Drill holes and tighten
screw. Attach cover back on fuse end.

10 11
Attaching Merchandise – Tablet
Power Connector
(determined by merchandise)
Power Supply
(InVue or OEM)
1Wipe back of merchandise with alcohol wipe provided.
Let it dry completely.
CONTENTS: One pad saturated in
Isopropyl Alcohol
75%
DIRECTIONS: Apply topically as
needed to cleanse surface mounting area.
FOR EXTERNAL USE ONLY
KEEP OUT OF REACH OF
CHILDREN
KEEP AWAY FROM EYES
AND FIRE

12 13
3Remove clear film from adhesive on alarm module.
Plug power connector into merchandise. Confirm LTO
cord is towards top of merchandise. Center LTO alarm
module on back of merchandise and press firmly for at
least 10 seconds.
2Remove white tab to activate battery. If powering
merchandise: Plug power connector into alarm
module. Snap cover onto alarm module. Push down
on cover until you hear a “click.”
Confirm LTO cord
is towards top of
merchandise.

14 15
4Plug InVue power supply or OEM power suppy to LTO
fuse. Plug power supply into outlet.
Arm/Disarm LTO
Place key on lens of LTO.
Press button on key once
to arm or disarm alarm.

16 17
Re-merchandising – Removing Alarm Unit
To change tablet position on display (shown below):
Remove both screws with screwdriver to remove alarm unit.
To completely remove position on display: Use removal tool
(MP254 - not shown).
Re-merchandising – Removing Cover
Squeeze both sides of cover and lift up to remove cover.

© 2014 InVue Security Products Inc. All rights reserved.
InVue is a registered trademark of InVue Security Products.
SD0182 Rev1 01/08/14
www.invuesecurity.com
Corporate Office (North America) // 704.752.6513 •888.55.INVUE
Europe, Middle East & Africa // +31.23.8900150
Asia Pacific // +852.3127.6811
Latin America // +52.55.90003957