Inxpect MSK-101 User manual

MSK-101
Carefully read this manual in its entirety.
You will find useful information to take full advantage of the product's potential, use it
safely and obtain the best results.
Installation instructions
v1.0 - EN
Intelligent motion sensor
Exclusive distributor for Europe

Copyright © 2017-2018, Inxpect SpA
All rights reserved in all countries.
Any distribution, alteration, translation or reproduction, partial or total, of this
document is strictly prohibited unless with prior authorization in writing from
Inxpect SpA, with the exception of the following actions:
lPrinting the document in its original format, totally or partially.
lTransferring the document on websites or other electronic systems.
lCopying contents without any modification and stating Inxpect SpA as
copyright owner.
Inxpect SpA reserves the right to make modifications or improvements to the
relative documentation without prior notice.
Requests for authorization, additional copies of this manual or technical
information on the latter, must be addressed to:
Inxpect SpA
Via del Serpente, 89
25131 Brescia (BS)
Italy
[e-mail]
[phone]

Contents
Get to know MSK-101 4
MSK-101 4
Applications 4
Barrier configuration 5
Field of vision 6
Interferences 7
Installation and use procedures 8
Installation and configuration 8
Appendix 14
Technical data 14
Disposal 14
Conformity and restrictions 14
Service and warranty 15
Download 15
MSK-101| Installation instructions v1.0 FEB 2018 |msk-101_instructions_en_wo v1.0|© 2017-2018 Inxpect SpA iii
Provided documentation
Document Code Date Distribution format
Installation instructions (this manual) msk-101_instructions_en_wo v1.0 FEB 2018 PDF online
Advanced configuration manual msk-101_advanced-config_en_wo v1.2 FEB 2018 online manual
PDF online

4MSK-101| Installation instructions v1.0 FEB 2018 |msk-101_instructions_en_wo v1.0|© 2017-2018 Inxpect SpA
1
Get to know MSK-101
MSK-101
Main components
Part Description
APerforated housing base for
adaptation to the main
junction boxes
IMPORTANT: the base of
the container is, together
with the two fastening
screws (not provided),
an integral part of the
sensor anti-removal and
anti-tear system.
BSensor housing
CAdjustable support for the
sensor with integrated
fastening screws
DSensor
ECaps to cover the fastening
screws of the adjustable
support
FBox-base fastening screw
Note: the container-base
fastening screw is not a part of
the sensor anti-removal and
anti-tear system.
Sensor
Part Description
ATerminal block for
connecting power supply and
four relays
BConnector for connecting the
dongle
CSensor plane indicators
(horizontal or vertical)
DLED
Applications
Types of applications
The sensor is suitable for indoor and outdoor
installations and can be mounted on the wall or
ceiling.
According to the direction, the sensor can be:
la volumetric sensor to monitor a large area
(horizontal direction).
lbarrier sensor to monitor a perimeter area,
creating a protective barrier against access
along a wall or gate (vertical direction).

Examples of volumetric sensor
installation
Examples of barrier sensor
installation
Barrier configuration
Adapter for barrier assembly
Barrier installation for protection of a wall or
window requires the sensor to be installed at
approximately 15 cm (5.9 in) from the same wall.
If other adequate supports are not available, an
adapter is necessary for assembling the barrier
(product code: MSK-101-BM.
Figure 1- Example of installation without adapter.
Figure 2- Example of installation with MSK-101-BM adapter.
Sensor direction
The MSK-101-BM adapter, according to the
installation method, allows directing the sensor
to the right or the left.
Figure 3- Sensor directed towards the right.
Get to know MSK-101
MSK-101| Installation instructions v1.0 FEB 2018 |msk-101_instructions_en_wo v1.0|© 2017-2018 Inxpect SpA 5