
SL450824
Imonitoring device for air andgases
Iintegrated electronics
ILED balancing indicator
Istainless steel coated measuring system
Irobust PA housing
Iscrew thread G ½
Ipressure resistance up to 30bar
IM12-connector
TECHNICAL DATA
operating voltage 24V DC ± 20%
current consumption current consumption 80mA
switching output relay output, no
detection range air / gases 0.5 to 30m/s
standby time 10 … 90s
reaction time 2 … 30s
degree of protection IP67 (DIN 40050)
ambient temperature -20 … +70°C
temperature range of medium -20 … +80°C
temperature gradient 20°C / min.
pressure resistance 30 bar
material sensor V4A
material housing PA
Connection Mounting
Mounting instructions:
When installing the sensor in the flow channel, make sure that the two measuring pins are completely immersed
in the flow. The maximum immersion depth islimited tohalf the channel diameter.
Flow sensor for air and gases
Pressure resistance up to 30 bar
MANUAL •Subject to alteration! Version: March 2019
ipf electronic gmbh
•Rosmarter Allee 14 •58762 Altena
│
Tel +49 2351 9365-0 •Fax +49 2351 9365-19
│