ipLDK LDP7008 User manual

LDP7008/16/24D Digital Telephone
User Guide

Servi ing and Safety Pre autions
• Do not drop or subject the phone to physical shock
• Do not immerse in water
• Do not disassemble or attempt to modify the phone in any way
• Use a damp or anti-static cloth to clean the phone. Do not use a dry or
electrostatically charged cloth. Do not use chemical or abrasive cleaners as these
could damage the phone.
• Retain the cardboard packaging supplied with this handset. It should be used if the
phone has to be returned for service. he packaging can be recycled when no longer
required.
• Please take care not to place the phone in direct sunlight for prolonged periods.
Servi e
he 7008/16/24D digital telephone contains no user-serviceable parts. LG
recommend that your 7008/16/24D digital telephone is serviced or repaired by an LG
authorised service centre
7008/16/24D User Guide | Emergency Services and Safety Precautions 01
Preset Messages
7008/16/24D User Guide | Preset Messages 14
Preset Messages
Preset messages that can be left in the display of your handset are as follows:
00 PERSONAL/CUSTOMISABLE Message.
01 LUNCH, RTN HH:MM – Use this message if you are away from your desk at lunch. he
internal calling party will see this message on their display when the call you.
02 ON VACATION/RTN DATE (MM:DD) – his message will inform internal callers that your
are on holiday and your expected return date.
03 OUT OF OFFICE/RTN TIME (HH:DD) – If you are out of the office for a period of the day
internal callers can see your expected return time.
04 OUT OF OFFICE/RTN DATE (MM:DD) – As per message 03 but you should use this if
you are away from the office for a day or more.
05 OUT OF OFFICE/RTN UNKNOWN – his message should really be used in emergencies
where you have been called away from the office unexpectedly.
06 CALL: XX…..(17 DIGITS) – If you are away from your desk/office and cannot take calls
this is a way of informing internal callers that they should ring an alternative number.
07 IN OFFICE/STA XXXX – You may have to work at another colleagues station. his informs
internal callers where to redirect their call to.
08 IN A MEETING/RTN TIME (HH:MM) – If you are not contactable in a meeting you should
use this message.
09 AT HOME – If you are to be working from home for a day leave this message on you
phone before leaving the office.
10 AT BRANCH OFFICE
11-20 – hese options are available to be custom set to your organisation’s requirements.

User Programming Codes
7008/16/24D User Guide | User Programming Codes 13
User Programming Codes
Flexible buttons can be assigned as the one of the popular features below. o programme a
button as the code the sequence is:
[TRANS/PGM] + [FLEX BUTTON] + Programme Number + [HOLD/SAVE]
Differential Ring………………………...11
Enblock Mode………………………..…14
SMS Notice/Display……………………15
Headset Port On/Off……………………17
ICM Ring one………………………….18
CO Ring one…………………………19
COS Down………………………………21
Walking COS……………………………23
Authorisation Code Register…………31
Authorisation Code Change…………...32
Set Wakeup ime………………………41
Conference Room Activate……………43
Conference Room Deactivate………...44
Preset Message Activation……………51
Set Custom Message………………….52
Record User Greeting………………….61
Play Date and ime…………………….62
Play Station Number…………………63
Listen to Station Status…………………64
Record Paging Message……………….65
Erase User Greeting……………………66
Erase Paging Message…………………67
LCD Language Change………………71
BGM (Background Music)……………73
Station Name Register………………….74
Headset Setup…………………………..75
Headset/ elephone Ring Mode………76
Account Code……………………………80
DDI Call Wait Activate…………………81
Intercom (ICM) Hold…………………….83
Camp On…………………………………85
UCD (Call Centre) DND………………87
Conference………………………………91
DND………………………………………93
Flash……………………………………...94
Mute………………………………………95
Redial…………………………………….97
Getting to know your 7008/16/24D
7008/16/24D User Guide | Getting to know your 7008/16/24D Digital elephone 02
Your digital telephone’s keys
(1) Speaker
his button is for activating the phone’s speaker whilst on hook. Useful when using a headset
or if you wish to speak hands free. Red LED illuminated if off-hook without lifting the receiver.
(2) Hold/Save Key
Dual purpose key. When in a call it is used to place a caller on hold. When programming it is
for permanently updating changes to the system memory.
(3) Volume (+ / -) Key
Used for adjusting speaker, ringing and in-call volume
.
(4) Speed Key
his key is used to access System and Personal speed dial numbers and the internal
directory.
(5) Trans/Pgm Key
Dual purpose key. When in a call with an external party it is used to transfer. When
programming features, speed dial numbers it is a programme key.
(6) Flexible Keys
hese keys are for use as line keys or for storing regularly used features or speed dials.
(7) Silver Navigation Button (16 & 24D Only)
his button is for quick, easy access to your phonebook and menu tree. he OK button is for
confirmation of programming changes and menu commands.
(8) Context keys (3 silver keys under LCD display – 16D & 24D only)
Depending upon the active state of your phone, these keys will relate to different on-screen
prompts.

General Fun tions
7008/16/24D User Guide | General Functions 03
Making and Answering alls
Always ensure that external parties are informed if you intend to record a call.
Making and Answering an external all
Options for calling externally are:
1. Lift the handset and dial 9
2. Dial 9
3. Press the [SPEAKER] button and dial 9
Dial the desired number
o answer a call lift the handset or press the [SPEAKER] button.
Making and Answering an internal all
You can make an internal call in the following ways:
1. Lift the handset and dial an extension number.
2. Dial an extension number.
3. Press a [FLEXIBLE] button assigned as an extension number.
o answer a call lift the receiver or press the [SPEAKER] button.
Pla ing and External/Internal Call on hold
Whilst connected to another party (internal or external) press the [HOLD/SAVE] button.
Retrieving an External/Internal Call on hold
If you are ‘Off-Hook’ (holding the handset) simply hang up (replace the handset) or dial the
extension number of the station that you placed on hold and you will be reconnected.
USER PROGRAMMING CODES
PRE SET MESSAGES
PAGE CODES
7008/16/24D User Guide | Menu ree 12

Menu Tree
7008/16/24D User Guide | Menu ree 11
[1] RING
1.1 YPE
1.2 ANSWER MODE
1.2.1 HANDSFREE (H)
1.2.2 ONE ( )
1.2.3 PRIVACY (P)
1.3 SMS MSG DISPLAY
1.4 ENBLOCK MODE
1.5 SMS/NO ICE DISPLAY
1.6 SCROLL SPEED
1.7 EAR-MIC HEADSE
1.8 ICM RING
1.9 CO RING
[2] COS
2.1 COS DOWN
2.2 COS RES ORE
2.3 WALKING COS
2.4 COS CHANGE
[3] AUTH / MOBILE EXTN
3.1 AU H REGIS ER
3.2 AU H CHANGE
3.3 REG MOBILE-EX
3.4 AC IVE MOBILE-EX
[4] TIME / CONF-ROOM
4.1 SE WAKE-UP IME
4.2 WAKE-UP DISABLE
4.3 AC IVE CONF-ROOM
4.4 DEAC IVE-CONF ROOM
SILVER NAVIGA ION BU ON (16D, 24D Only)
Enter the menu via this key will take you to an edited
version of the above menu tree containing ‘popular’
features. For more information on how to use the
Navigation button feature or the above menu tree
you should contact your local authorised LG
Reseller who can provide an In-depth user guide on
all aspects of the 7008D, 7016D and 7024D Digital
elephones.
[5] MESSAGE
5.1 SE PRESELEC ED MSG
5.2 SE CUS OM MSG
[6] ANNOUNCEMENT
6.1 REC USER GREE ING
6.2 LIS EN IME/DA E
6.3 LIS EN S A NUMBER
6.4 LIS EN S A S A US
6.5 REC PAGE MSG
6.6 ERASE USER GREE ING
6.7 ERASE PAGE MESSAGE
[7] SUPPLEMENTARY
7.1 LCD DISPLAY LANGUAGE
7.2 MPB VERSION DISPLAY
7.3 BGM
7.4 REGIS ER S A NAME
7.5 SPK/HEADSE
7.6 HEADSE RING MODE
7.7 W U S A NUM RCVR
7.8 SERIAL NUMBER
7.9 PC-PHONE LOCK KEY
[*] SYSTEM (DO NOT USE)
o enter the menu press the [TRANS/PGM] button
General Fun tions
7008/16/24D User Guide | General Functions 04
Call Forward
1. Dial 554 from your handset or press the [SPEAKER] button followed by the [DND/FWD]
button.
3. Select a forward option as per below. (Example: Select option 4, Busy/No Answer)
4. Select the destination appropriate to the call forward type. ( o select the integral messaging
card press #- you will need permission to use this application).
5. o cancel the call forward dial 554, #.
7016D & 7024D Only:
Follow above instru tions or alternatively:
1. Press the [SPEAKER] button.
2. Press the 1
st
of the silver keys with FWD above it on the display.
3. Follow option 3 onwards as described above.
Call Forward
It is possible to forward you phone in a number of ways. he options available are:
0 – Follow-Me ( o forward calls from your extension to a temporary location. he forward is
activated at the temporary location. A valid authorisation code will be required).
1 – Unconditional ( his option allows you to forward all calls immediately to a Station, Hunt
Group or the integral Voice Messaging card).
2– Busy (Destination options are as per option 2. Calls will only forward when you are busy –
on the phone).
3– No Answer (Destination options as per option 1. Calls will only forward when a ‘No-Answer’
timer expires. he length of the time is determined by a qualified System Administrator).
4– Busy/No Answer (Combines options 2 & 3. Most popular, especially where Voicemail is
used).
5– Off-Net ( his allows you to forward your phone unconditionally to a remote location such as
Mobile or home phone using a speed dial).
6– No Answer Off-Net (As per option 6 but only after a no-answer timer)
7– Access Not Permitted
#- Allows you to cancel any call forward.

User Programming
7004N/D User Guide | User Programming 10
Chara ter Entry Chart
Please follow the chart below when entering characters.
#0 = 00
Spa e = *1
: = *2
, = *3
W = 91
X = 92
Y = 93
Z = 94
9 = 90
T = 81
U = 82
V = 83
8 = 80
P = 71
Q = 72
R = 73
S = 74
7 = 70
M = 61
N = 62
O = 63
6 = 60
J = 51
K = 52
L = 53
5 = 50
G = 41
H = 42
I = 43
4 = 40
D = 31
E = 32
F = 33
3 = 30
A = 21
B = 22
C = 23
2 = 20
. = 13
1 = 10
General Fun tions
7004N/D User Guide | General Functions 05
Parking a Call
Whilst connected to an external party press the [TRANSFER] button, dial a Park Lo ation
(See below for lo ation numbers) or press a flexible button labelled as Park and hang up.
Retrieving a Parked Call
If retrieving a call that you have parked, dial the relevant digits for the parking bay used (See
below)
If responding to a page, dial the relevant digits (See below) from the nearest available
telephone.
Call Wait (Camp On)
1. Dial an internal number
2. Get busy tone and press the [*] button.
3. If the called party answers you can speak with them or simply transfer a call to them.
7016D & 7024D only
1. Press the 2
nd
Silver Key with CAMP-ON above it on the display when you dial a busy
extension.
2. As per option 3 above.
Answer a Call Wait (Camp On)
1. After hearing Call Wait (Camp On) tone press the flashing [HOLD/SAVE] button.
2. Your existing caller is placed on hold.
3. When you have finished speaking you will return to the original caller when the second caller
hangs up.
TIP: It is possible to assign a flexible button as CAMP ON. See Page 13 for Flexible Key
programming odes.
Park Lo ations:
IPLDK50/100: 601-610
IPLDK300/300E: 601-619

User Programming
7008/16/24D User Guide | User Programming 09
Saving your name to your phone
1. Press the [TRANS/PGM] button and dial 74.
2. Enter your name as per the Character Entry chart
3. Press the [HOLD/SAVE] button to save your name to the system memory
Storing Personal Speed Dials
1. Press the [TRANS/PGM] button.
2. Press the [SPEED] button.
3. Dial the number of the speed dial bin you 000-099
4. Enter the required speed dial number and press [HOLD/SAVE]. (You do not need to enter
9 for an outside line).
5. Enter the name as per the character entry chart on page 23.
6. Press the [HOLD/SAVE] button.
Storing information under a flexible button
1. Press the [TRANS/PGM] button and select the button you wish to assign.
2. Assign the button in on of the following ways:
a) Press the [TRANS/PGM] button followed by a user programming code .
b) Press the [SPEED] button followed a speed dial number.
c) Enter the relevant extension number.
3. Press the [HOLD/SAVE] button.
General Fun tions
7008/16/24D User Guide | General Functions 06
Call Pi kup (Dire ted)
1. Dial 7 followed by the extension number of the station that is ringing (or group number if a
group of phones is ringing).
2. You will then be connected to the calling party.
(Code can be saved under a flexible button).
Call Pi kup (Group)
1. Pick up your handset or press the [SPEAKER] button.
2. Dial 566.
3. You will be connected to the caller.
(Code can be saved under a flexible button).
On the 7016D and 7024D you can press the 1st Silver Key with PICKUP above it on the
display for both types of Pickup.
Transfer (S reened)
1. Whilst connected to a caller press the [TRANS/PGM] button. (For 7016D or 7024D you can
press the 1st Silver Key with TRANS above it on the display.
2. Dial the appropriate extension number or press a flexible button that has been assigned
with a station number.
3. Wait for the called party to answer, announce the call and Hang Up
Transfer (Uns reened)
1. Repeat steps 1 to 3 as described above.
2. Hang up on ringing without announcing the call.
Using Speed Dial Numbers
1. Press the [SPEED] button.
2. Dial the required speed dial number.
Making a Page
1. Lift receiver or press the [SPEAKER] button.
2. Dial the required paging code (see below).
3. Hang up once you have finished the page.
501-535 – Internal Page Zone
543 – Internal All Call
544 – Meet Me
545 – External Zone 1
546 – External Zone 2
547 – External Zone 3
548 – External All Call
549 – All Call (Page zones will need programming).

General Fun tions
7008/16/24D User Guide | General Functions 07
Conferen e Call
You will need a flexible button assigned as [CONFERENCE] on the 7008D.
1. Press the [CONFERENCE] button while on a call (7016D and 7024D – press the 2
nd
Silver
Key with CONF above it on the screen).
2. Dial another extension or external number.
3. When the party answers press the CONFERENCE button once to enable you to add
another party or twice to set up the conference and allow all parties to converse.
Last Number Redial/Redial
o redial the last external number you called you will need a flexible button assigned as
REDIAL on the 7008D.
1. Press the REDIAL button (7016D and 7024D – press the 3
rd
Silver Key with REDIAL above
it on the screen.
2. Use the [VOLUME +/-] button to find the number you require. he first in the list is the last
dialled number.
3. Press the [HOLD/SAVE] button and the number you selected will be dialled.
4. o access the last dialled number you can alternatively press the [SPEED] button followed
by the [*] button followed by [HOLD/SAVE].
Leaving a Message Wait Notifi ation
At a Busy Station
1. Press the [CALL BACK] button.
2. When the busy part hangs up you will be notified with intermittent bursts of tone.
Calling an Unanswered Station
1.Press your [CALL BACK] button and hang up.
Answering a Message Wait Notifi ation
1. Press the [CALL BACK] button or dial 557.
USER PROGRAMMING
STORING YOUR NAME
STORING PERSONAL SPEED DIALS
CHARACTER ENTRY CHART
7008/16/24D User Guide | User Programming 08