IQ Power Tools X-STAND User manual

X-STAND
Operator’s Manual
To be used with the iQTS244

X-STAND
Operator’s Manual iQ Power Tools
2888-274-7744
www.iqpowertools.com
Dear Customer
We at IQ Power Tools™ want to congratulate you on
selecting the iQTS244™ Dust Control Tile Saw. We
are certain that you will be pleased with your purchase.
iQ Power Tools takes pride in manufacturing the most
innovative tools and equipment in the industry.
If operated correctly, your iQTS244™ should provide
you with years of quality service. This operator’s
manual contains information you need to operate and
maintain your iQTS244™ safely and correctly. Please
take a few minutes to familiarize yourself with your new
iQTS244™ by reading and reviewing this manual.
It is our wish that you will be satisfied with your product
and that it will prove to be a valued tool for a long time.
A purchase of one of our products gives you access
to professional help with repairs and services. If
the retailer who sells your machine is not one of our
authorised dealers, ask him for the address of your
nearest service workshop.
This operator’s manual is a valuable document. Make
sure it is always at hand at the work place. By following
its content (using, service, maintenance etc.) the life
span and the second-hand value of the machine can
be extended. If you ever lend or sell this machine, make
sure that the borrower or buyer gets the operator’s
manual, so they will also know how to properly maintain
and use it.
Accessories can be purchased from your local
iQ Power Tools dealer or directly from iQ Power Tools by
calling 888-274-7744 or through our website
at iQPOWERTOOLS.com.
If you should have any questions concerning your
iQTS244™ please feel free to contact us at
Phone: [phone]
Email: [e-mail]
PRESENTATION
The Manufacturer’s Reservation
Subsequent to publishing this manual IQ Power Tools
may issue additional information for safe operation of
this product. It is the owner’s obligation to keep up with
the safest methods of operation.
iQ Power Tools has a policy of continuous product
development and therefore reserves the right to
modify the design and appearance of products
without prior notice.
For customer information and assistance, contact us
at our website: www.iQPowerTools.com
Design & Features
Values such as high performance, reliability, innovative
technology, and environmental considerations
distinguish iQ Power Tools’s products. Safe operation of
this product requires the operator to read this manual
carefully. Ask your dealer or iQ Power Tools should you
need more information.

X-STAND
Operator’s Manual
iQ Power Tools 3
888-274-7744
www.iqpowertools.com
INSTALLING THE X-STAND (optional accessory)
With the saw resting on the wheels and back feet.
Hold the X-Stand as shown. Connect hooks on
X-Stand (A) over upper crossbar of saw tube frame.
Put slight pressure on transport handle (A) while
pushing X-Stand down (B) until lower cross bar of saw
tube frame engages with X-Stand lock pin.
1.
2.
Lower the transport handle by pulling transport
handle lock pin (A) then pushing down on transport
handle (B).
With X-Stand attached lifting the machine to its
upright operating position. As shown below, with left
foot placed near cutting head (A) with left hand lift
on cutting head handle while guiding upward rotation
with right hand on transport handle (C). Note: Before
lifting allow approximately 6ft. / 2m to lift and rotate
the machine to its upright operating position.
3.
4.
WARNING!
WARNING! BE SURE TO LOCK
THE ROLLING TABLE BEFORE
TRANSPORT TO AVOID EQUIPMENT DAMAGE OR
PERSONAL INJURY.
A
A
B
A
B
B
A
C

X-STAND
Operator’s Manual iQ Power Tools
4888-274-7744
www.iqpowertools.com
REMOVING THE X-STAND
Removing the optional X-Stand. With your right hand
on transport handle (C) and left hand on cutting head
handle (B) rotate the machine back.
Note: Before lowering allow approximately
4 ft. / 1.5 m to behind the machine to rotate the
machine down to the floor.
Guide machine back to rest softly on the floor.
1.
2.
X-STAND
CB

X-STAND
Operator’s Manual
iQ Power Tools 5
888-274-7744
www.iqpowertools.com
When X-Stand lock pin is released rotate up (A) then lift
with left-hand (B) unhooking X-Stand from machine.
Machine can now be tipped forward onto the wheels
for easy transport.
Raise the transport handle by pulling transport handle
lock pin (A) then pulling up on transport handle (B)
With slight pressure against transport handle (A) with
tip of left foot pushed down on X-Stand lock pin knob
(B) then pull up with right-hand (C).
3.
4.
5.
6.
X-STAND
A
B
A
B
C
B CLOSE-UP
B
A