iRay Technology Mars1717V User manual

Wireless Digital Flat Panel Detector
Mars1717V
User Manual
Document Version：A1
Document ID: 062-201-02
Release Date：2018-8-20
Before operating, please read this user manual and pay attention to all safety precautions.
Please ensure that this user's manual is properly maintained so that it can be accessed at
any time ( reserve ).
Please use it correctly on the basis of full understanding of the content.
E

To Customers
iRay Technology Co. Ltd. 1
To Customers
Congratulations on your purchase of the Fixed Digital Flat Panel (hereinafter
referred to as Mars1717V) which is manufactured by iRay Technology Co.Ltd.
(Hereinafter referred to as iRay).
At iRay, we strive to not only make the world-class products that deliver the best
value possible to our customers but also offer the highest quality of service and
customer care. Please take time to read through this user guide in order to utilize
the product effectively. We hope you enjoy the experience with iRay Mars1717V
（configuration：Mars1717V2 ）.
If you have any questions or suggestions, please feel free to contact us.
Notes on usage and management of the equipment
Read all of the instructions in the user guide before your operation. Give particular
attention to all safety precautions.
Only a physician or a legally certified operator should use this product.
The equipment should be maintained in a safe and operable condition by
maintenance personnel.
Use only computers and image display monitors complying with IEC 60601-1 or
IEC 60950-1. For details, consult our sales representative or local iRay dealer.
Use only the dedicated cables. Do not use any cables other than those supplied
with this product.
Request your sales representative or local iRay dealer to install this product。
Service Office
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
Location: 2F, Building 9, No.590, Ruiqing Rd, Pudong, Shanghai,
China PC: 201201

Mars1717V Digital Flat Panel Detector User Manual
2 iRay Technology Co. Ltd.
Caring for your environment
This symbol indicates that this product is not to be disposed of with your
residential or commercial waste.
Recycling iRay Equipment
Please do not dispose of this product with your residential or commercial waste.
Improper handling of this type of waste could have a negative impact on health
and on the environment. Some countries or regions, such as the European Union,
have set up systems to collect and recycle electrical or electronic waste items.
Contact your local authorities for information about practices established in your
region. If collection systems are not available, call iRay Customer Service for
assistance.
Disclaimer
iRay shall not be liable to the purchaser of this product or third parties for any
damage, losse, or injury incurred by purchaser or third parties as a result of fire,
earthquake, any accident, misuse or abuse of this product.
iRay shall not be liable to any damage, loss, or injury arising from unauthorized
modifications, repairs, or alterations to this product or failure to strictly comply with
iRay’s operating and maintenance instructions.
iRay shall not be liable for any damage or loss arising from the use of any options
or consumable products other than those dedicated as Original iRay Products by
iRay Technology.
It is the responsibilities of the user/attending physicians for maintaining the
privacy of image data and providing medical care services. iRay shall not be
responsible for the legality of image processing , reading and storage nor it shall
be responsible for loss of image data for any reason.
Information regarding specification, compositions, and appearance of this product
is subject to change without prior notice.。
Copyright
All rights reserved
No part of this publication may be reproduced in any form or by any means
without the written permission of iRay. The information contained herein is
designed only for use with iRay Mars1717V (configuration: Mars1717V2)
Trademarks
The iRay name and iRay logo are registered trademarks of iRay Technology
Co.Ltd.

To Customers
iRay Technology Co. Ltd. 3
Symbols and Conventions
The following symbols and conventions are used throughout the user guide.
This symbol is used to identify conditions under
which improper use of the product may cause death
or serious personal injury.
This notice is used to identify conditions under
which improper use of the product may cause minor
personal injury.
This notice is used to identify conditions under
which improper use of the product may cause
property damage.
This is used to indicate a prohibited operation.
This is used to indicate an action that must be
performed.
This is used to indicate important operations and
restrictions.
This is used to indicate operations for reference and
complementary information.

Mars1717V Digital Flat Panel Detector User Manual
4 iRay Technology Co. Ltd.
Labels and markings on the equipment
The contents of the labels and markings on iRay Mars1717V2 product are indicated below:
Diagram
Connotation
Caution: please refer to the instructions in the user manual.
This symbol is used to indicate that the equipment has passed
CE testing and it is followed by the CE number.
This symbol is used to identify the manufactuer's series
number which is after, below or adjacent to the symbol. The
series number of iRay products is usually made of thirteen
digits as shown below:
This symbol is used to indicate the name and address of the
manufacturer.
This symbol is used to indicate the name and address of iRay
authorized representative in the European region.
This symbol is used to indicate consultation of the user guide
for general information.
Safety Signs: please refer to the user guide for safety
instructions.
Safety Signs：Dangerous Voltage.
Stand-by.
Numerical Order
Year
Date
Month
Version
Product Code
A1A2A3A4 C1C2 M DD Y XXX

To Customers
iRay Technology Co. Ltd. 5
Handled with care.
This symbol is used to indicate the operational temperature
limits.
Package symbol, fragile.
Package symbol, keep away from sunlight.
Package symbol, keep dry.
Package symbol, this symbol is used to indicate the humidity
limits.
Package symbol, keep the equipment up right.
Package symbol, do not roll the transportation package.
Package symbol, this symbol is used to indicate stacking limit
number.
Protective grounding.

Mars1717V Digital Flat Panel Detector User Manual
6 iRay Technology Co. Ltd.
Contents
TO CUSTOMERS ........................................................................................................................ 1
CONTENTS.................................................................................................................................. 6
1. SAFETY.................................................................................................................................8
1.1 Safety precautions...............................................................................9
1.2 Notes for Using.................................................................................13
2. GENERAL DESCRIPTION.....................................................................................................14
2.1 Scope ...............................................................................................15
2.2 Model.................................................................................................15
2.3 Characteristic.....................................................................................16
2.4 Intended use/ essential performance/ application specification........16
2.5 Essential performance.......................................................................16
2.6 The relative position between patient and detector...........................17
2.7 Product Components.........................................................................17
2.8 Optional Product Component............................................................20
2.9 Components Description...................................................................20
2.10 Product Specification.......................................................................24
3. INSTALLATION......................................................................................................................32
3.1 Panel Installation ...............................................................................33
3.2 Battery Charger Installation...............................................................36
3.3 Software Installation..........................................................................37
3.4 Panel Infrastructure...........................................................................37
4. OPERATION ...........................................................................................................................57
4.1 Main Operation.................................................................................58
4.2 Connection Build ...............................................................................66
4.3 Panel Configuration...........................................................................66
4.4 Correction and Calibration Template Generation..............................68
4.5 Image Check and upload ..................................................................72
4.6 Defect Template Check and Modification .........................................74
4.7 Correction and Calibration Management...........................................77
4.8 Firmware Update...............................................................................79
4.9 Short cut ............................................................................................82
4.10 Software...........................................................................................83
4.11 List of the HAZARDOUS SITUATIONS resulting from a failure of the IT-
NETWORK 92
5. REGULATORY INFORMATION............................................................................................. 94
5.1 Medical equipment safety standards.................................................95
5.2 The compliance for each EMISSIONS and IMMUNITY standard or test
specified by IEC60601-1-2 standard.......................................................96
5.3 Radio Frequency Compliance Information......................................100
5.4 Battery Safety Standards ................................................................102

To Customers
iRay Technology Co. Ltd. 7
6. TROUBLE SHOOTING.........................................................................................................103
7. SERVICE INFORMATION ....................................................................................................105
7.1 Product Lifetime...............................................................................106
7.2 Regular Inspection and Maintenance..............................................106
7.3 Repair..............................................................................................106
7.4 Replacement Parts Support ............................................................106
APPENDIX ................................................................................................................................107
Appendix A Information of Manufactures..............................................108
Appendix B Information of Medical Device Directive European Representative
...............................................................................................................109

Mars1717V Digital Flat Panel Detector User Manual
8 iRay Technology Co. Ltd.
1. Safety
1.1 Safety precautions..............................................................................9
1.2 Notes for Using.................................................................................13

1. Safety
9 iRay Technology Co. Ltd.
1.1 Safety precautions
Follow these safeguards and properly use the equipment to prevent injury and damage to
any equipment/data.
WARNING
Installation and
environment of
use
Do not use or store the equipment near flammable
chemicals such as alcohol, thinner, benzene, etc.
If chemicals are spilled or evaporate, it may result in fire or
electric shock through contact with electric parts inside the
equipment. Also, some disinfectants are flammable. Be
sure to take care when using them.
Do not connect the equipment with anything other than
specified.
Doing so may result in fire or electric shock.
All the patients with active implantable medical
devices should be kept away from the equipment.
Power supply
Do not operate the equipment using any type of power
supply other than the one indicated on the rating label.
Otherwise, it may result in fire or electric shock.
Do not handle the equipment with wet hands.
You may experience electric shock that could result in
death or serious injury.
Do not place heavy object such as medical equipment
on cables and cords. Do not pull, bend, bundle, or step
on them to prevent their sheath from being damaged,
and do not alter them neither.
Doing so may damage the cords which could result in fire
or electric shock.
Do not supply power to more than one piece of
equipment using the same AC outlet.
Doing so may result in fire or electric shock.
Do not turn ON the system power when condensation
has formed on the equipment.
Doing so may result in fire or electric shock.
Do not connect a multiple portable socket-outlet or
extension cord to the system.
Doing so may result in fire or electric shock.
To avoid the risk of electric shock, this equipment
must only be connected to power supply with
protective earth.
Not doing so may result in fire or electric shock.
Securely plug the power cord into the AC outlet.
If contact failure occurs, or if metal objects come into
contact with the exposed metal prongs of the plug, fire or
electric shock may result.
Be sure to turn OFF the power to each piece of
equipment before connecting or disconnecting the
cords.
Otherwise, you may get an electric shock that could result
in death or serious injury.
Be sure to hold the plug or connector to disconnect
the cord.
If you pull the cord, the core wire may be damaged,
resulting in fire or electric shock.

Mars1717V Digital Flat Panel Detector User Manual
10 iRay Technology Co. Ltd.
WARNING
Handling
Never disassemble or modify the equipment. No
modification of this equipment is allowed. Parts of the
VENU1717MN that are not serviced or maintained
while in use with the patient.
Doing so may result in fire or electric shock. Also, since the
equipment incorporates parts that may cause electric
shock as well as other hazardous parts, touching them
may cause death or serious injury.
Do not place anything on top of the equipment.
The object may fall and cause an injury. Also, if metal
objects such as needles or clips fall into the equipment, or
if liquid is spilled, it may result in fire or electric shock.
Do not hit or drop the equipment.
The equipment may be damaged if it receives a strong jolt,
which may result in fire or electric shock if the equipment is
used without being repaired.
Do not put the equipment and pointed objects
together.
The equipment may be damaged. If so, the equipment
should be used in bucky.
Have the patient take a fixed posture and do not let the
patient touch parts unnecessarily.
If the patient touches connectors or switches, it may result
in electric shock or malfunction of the equipment.
When a problem
occurs
Should any of the following occurs, immediately
unplug the power cord of Control Box, and contact
your sales representative or local iRay dealer:
When there is smoke, an odd smell or abnormal sound.
When liquid has been spilled into the equipment or a metal
object has entered through an opening.
When the equipment has been dropped and damaged.
Maintenance and
inspection
Please turn OFF the power of the equipment and
unplug the power cord of adaptor before cleaning.
NEVER use alcohol, ether and other flammable
cleaning agent for safety. NEVER use methanol,
benzene, acid and base because they will erode the
equipment.
DON'T dip the equipment into the liquid.
Please make sure that the equipment's surface & plugs
are dry before turning ON.
Otherwise, it may result in fire or electric shock.
Clean the plug of the power cord periodically by
unplugging it from the AC outlet and removing dust or
dirt from the plug, its periphery and AC outlet with a
dry cloth.
If the cord is kept plugged in for a long time in a dusty,
humid or sooty place, dust around the plug will attract
moisture; this could cause insulation failure that may result
in a fire.
For safety reasons, be sure to turn OFF the power to
each piece of equipment when performing inspections
indicated in this manual.
Otherwise, electric shocks may occur.

1. Safety
iRay Technology Co. Ltd. 11
CAUTION
Installation and
environment of
use
Do not install the equipment in any of the locations
listed below. Doing so may result in failure,
malfunction, equipment falling, fire or injury.
Close to facilities where water is used
Where it will be exposed to direct sunlight
Close to the air outlet of an air-conditioner or ventilation
equipment
Close to heat source such as a heater
Where the power supply is unstable
In a dusty environment
In a saline or sulfurous environment
Where temperature or humidity is high
Where there is freezing or condensation
In areas prone to vibration
On an incline or in an unstable area
Take care that cables do not become tangled during
use. Also, be careful not to get your feet caught by
cable.
Otherwise, it may cause a malfunction of the equipment or
injury of the user due to tripping over the cable.
Power supply
Always connect the three-core power cord plug to a
grounded AC power outlet.
To make it easy to disconnect the plug at any time,
avoid putting any obstacles near the outlet. Otherwise,
it may not be possible to disconnect the plug in an
emergency.
Be sure to ground the equipment to an indoor
grounded connector. Also, be sure to connect all the
grounds for the system to a common ground.
Do not use any power source other than the one
provided with this equipment.
Otherwise, fire or electric shock may be caused due to
leakage.
Handling
Do not spill liquid or chemicals onto the equipment. In
case the patient is injured, it is not allowed to contact
with blood or other body fluids.
Doing so may result in fire or electric shock.
In such a situation, protect the equipment with a disposable
cover as necessary.
Turn OFF the power and pull out the plug to each piece
of equipment for safety when not used.

Mars1717V Digital Flat Panel Detector User Manual
12 iRay Technology Co. Ltd.
CAUTION
Handling
Handle the equipment carefully.
Do not submerge the equipment in water.
The internal image sensor may be damaged if
something hits against it or it is dropped.
Do not place excessive weight on the equipment.
Be sure to use the equipment on a protected foam.
Otherwise, the internal image sensor may be
damaged. Be sure to securely hold the detector
while using it in upright positions. Otherwise, the
detector may fall over, resulting in injury to the
user or patient, or may flip over, resulting in
damage to the inner device.
Keep the same load (same pressure) on the detector
when acquiring the image. Or the image will be
incorrect.
CAUTION
Do not close to fire, do not use in high temperature
Do not invert positive and negative pole
Do not contact with metal in case of short circuit

1. Safety
iRay Technology Co. Ltd. 13
1.2 Notes for Using
When using the equipment, take the following precautions. Otherwise, problems may
occur and the equipment may not function correctly.
Before exposure
Be sure to check the equipment daily and confirm that it works properly.
Sudden heating of the room in cold areas will cause condensation to form on
the equipment. In this case, wait until the condensation evaporates before
performing an exposure. If the equipment is used while condensation is formed
on it, problems may occur in the quality of captured images. When an air-
conditioner is used, be sure to raise/lower the temperature gradually so that a
difference of temperature in the room and equipment does not occur, to
prevent condensation.
The detector should warm up for 15 minutes before exposure or updating the
gain map or defect map.
During exposure
Do not move the power or Ethernet Cables during exposure, or it may cause
image noise or artifacts, even incorrect images.
Do not use the devices near the equipment generating a strong magnetic field.
Otherwise, it may cause image noise, artifacts or even incorrect images.
Disinfection and Cleaning (When in portable usage)
After every examination, wipe the patient contact surfaces of the detector using
disinfectants such as ethanol, to prevent the risk of infection. For details on
how to sterilize, consult a specialist.
Do not spray the detector directly with disinfectants or detergents.
Wipe it with a cloth slightly damped with a neutral detergent. Do not use
solvents such as alcohol, thinner, benzene, acid and base. Doing so may
damage the surface of the equipment.
It's recommended to use a waterproof non-woven cover as the isolated layer
between detector and the blooding patient.
Replace Cables
Turn OFF the power of the equipment and unplug the power cord from the AC
outlet before operation. Unplug the Detector cable from the float outlet, or it
may result in fire or electric shock.
Eliminate the static before replacing cable, including operating platform, tools and
operator, or ESD may damage the detector.

Mars1717V Digital Flat Panel Detector User Manual
14 iRay Technology Co. Ltd.
2. General Description
2.1 Scope ...............................................................................................15
2.2 Model.................................................................................................15
2.3 Characteristic.....................................................................................16
2.4 Intended use/ essential performance/ application specification .......16
2.5 Essential performance.......................................................................16
2.6 The relative position between patient and detector...........................17
2.7 Product Components.........................................................................17
2.8 Optional Product Component............................................................20
2.9 Components Description ..................................................................20
2.10 Product Specification.......................................................................24

2. General Description
iRay Technology Co. Ltd. 15
Mars1717V（configuration：Mars1717V2, hereinafter referred as Mars1717V ）is a
cassette-size wireless X ray flat panel detector based on amorphous silicon thin-film
transistor technologies. It is developed to provide the highest quality of radiographic
image, which contains an active matrix of 3072×3072 with 150um pixel pitch. Panels’
scitinator has two options which are Standard GOS(Gadolinium Sulfoxylate) and
CsI(Caesium Iodide). However the most great improvement is Mars1717V supports
wireless communication between panel and Workstation. Mars1717V’s power supply
includes battery. Mars1717V can be used as a real portable panel.
2.1 Scope
This manual contains information about the Mars1717V. Information in the manual,
including the illustrations, is based on prototype. If your configuration does not have any
of these items, information about these items does not apply to your panel.
2.2 Model
Mars □ □ □
PSI- GOS Model, VSI- CsI Model
Product Application：Cassette size portable detector
Product dimension：1717，17inch×17inch
Product series：Wireless digital flat panel detector series

Mars1717V Digital Flat Panel Detector User Manual
16 iRay Technology Co. Ltd.
Product Type: Battery-KV---------Rechargeable lithium battery
Product Type: Charger-KV--------Battery charger
2.3 Characteristic
Wireless static flat panel detector used for general radiography.
Cassette-size
Sync-shot exposure trigger
GOS or CsI scintillation screen.
Easy to change the cable and update firmware.
Battery recycling
2.4Intended use/ essential performance/ application specification
2.4.1 Intended use
Mars1717V Wireless Digital Flat Panel Detector is indicated for digital imaging solution
designed for providing general radiographic diagnosis of human anatomy. It is intended
to replace radiographic film/screen systems in all general-purpose diagnostic procedures.
This panel provides digital X ray imaging for diagnosis of disease, injury, or any
applicable health problem. The image is obtained as the result of X ray passing through
the human body and detected by detector.
iRay would provide hardware and software support for integration of system.
This panel is not intended for mammography or dental applications.
2.5 Essential performance
According to the Mars1717V series intended use and the result of risk management,
getting imaging and function of data transmission is defined as essential performance.
Getting qualified dark image proves that essential performance does not influence
intended use. Method for getting dark image in detail refers to section “install” and
“operation”

2. General Description
iRay Technology Co. Ltd. 17
2.5.1 Application specification
PATIENT population:
Weight: not relevant
Health: not relevant
Nationality: multiple
Patient state: patient is not user
Gender: except for pregnant women
Intended OPERATOR:
All of use, maintenance and operation steps should be carried out by the operator who
has accepted the professional training offered by the company's customer service staff.
Life-time:
Life-time: 5 years without frequency limit
2.6 The relative position between patient and detector
Because of the crosstalk effect of Amorphous silicon flat-panel detector, Pay attention to
the relative position of patient and detector, the recommended position as shown below,
Otherwise, the image is prone to abnormal light lines.
2.7 Product Components

Mars1717V Digital Flat Panel Detector User Manual
18 iRay Technology Co. Ltd.
Mars1717V comes with both DC power supply and battery package. Once powered on, it
would build a connection with Workstation through Ethernet cable (only for service) or
Wireless connection.
Item
Description
Mars1717V Detector
1pcs
Main Unit
Medical Adapter for
Detector and
Battery
Charger
1 pcs
DC 24V
Battery
2 pcs
Battery pack
Ethernet Cable
(Only for service)
1pcs
3.5 m