ISAFE MOBILE innovation 2.0 Instruction manual

i.safe MOBILEINNOVATION 2.0
Quick Start Manual
and
Safety Instrucons
Schnellstartanleitung
und
Sicherheitshinweise

i.safe MOBILE
Template: TEMPMD01REV00
Document No. 1008DI02REV03
Version: 2014-03-14
Reservaon: Technical Data is subject to change without noce. Changes,
errors and misprints may not be used as a basis for any claim for damages.
All rights reserved.
i.safe MOBILE GmbH cannot be held responsible for any data or other loss
and direct or indirect damages caused by any improper use of this phone.
Vorbehalt: Technische Änderungen behalten wir uns vor. Änderungen,
Irrtümer und Druckfehler begründen keinen Anspruch auf Schadensersatz.
Alle Rechte vorbehalten.
Für Datenverluste oder andere Schäden gleich welcher Art, die durch den
unsachgemäßen Gebrauch des Telefons entstanden sind, übernimmt die
i.safe MOBILE GmbH keine Haung.
(c) 2013 i.safe MOBILE GmbH
i.safe MOBILE GmbH
i_PARK TAUBERFRANKEN 14
97922 Lauda-Koenigshofen
Germany
Tel. [phone]
[e-mail]
www.isafe-mobile.com
INNOVATION 2.0

i.safe MOBILE
Note / Hinweis
3
This document contains a quick start guide and the safety instrucons
necessary for the safe use of the smartphone INNOVATION 2.0 in ex-
plosive atmospheres. The first part details the English instrucons, the
second part the German translaon.
More detailed instrucons on the use of the phone can be found at
www.isafe-MOBILE.com or directly at i.safe MOBILE GmbH.
Dieses Dokument enthält die notwendigen Sicherheitshinweise für die
sichere Verwendung des Smartphones INNOVATION 2.0 in explosions-
fähigen Bereichen. Der erste Teil enthält die englischen Anweisungen,
der zweite Teil die deutsche Übersetzung.
Detailliertere Informaonen erhalten sie unter www.isafe-MOBILE.com
oder direkt bei der i.safe MOBILE GmbH.

i.safe MOBILE
Contents
4
1 Introducon 5
2 Ex-Specificaons 6
3 Faults and Damages 7
4 Ex-relevant Safety Regulaons 8
5 Further Safety Advises 9
6 i.safe PROTECTOR 12
7 Keys 13
8 First Steps 14
8.1 Baery 14
8.2 Installaon of the SIM Cards 16
8.3 Installaon of the Micro-SD Card 17
8.4 First Use 17
8.5 Locking and Unlocking the phone 18
8.6 Using the Touchscreen 19
8.7 Connecng the phone with a computer 19
9 Display Layout 20
9.1 Status Bar 20
9.2 Quick Access Panel 22
9.3 Home Screen 23
10 Specificaons 25
11 Troubleshoong 26
12 Maintenance 27

i.safe MOBILE
Safety Instrucons
5
1 Introducon
This document contains informaon and safety regulaons which are to
be observed without fail for safe operaon of the smartphone
INNOVATION 2.0 under the described condions. Non-observance of
this informaon and instrucons can have serious consequences and /
or may violate regulaons.
Please read the manual and these safety instrucons before using the
phone. In case of contradicng informaon, the text of these safety
instrucons shall apply.
In case of any doubt, the German version shall apply.
The current EC declaraon of conformity, EC and IECEx cerficates of
conformity, safety instrucons and manual can be found at www.isafe-
mobile.com, or requested from i.safe MOBILE GmbH.
Note
This document contains only the instrucons necessary for seng up
and safe use of your phone. A complete Quick Start Manual can be
found in the root folder of the Micro-SD card of the phone or at
www.isafe-mobile.com.
Please consult 8.7 to learn how to access the Micro-SD card from any
computer.

i.safe MOBILE
Safety Instrucons
6
2 Ex-Specificaons
The INNOVATION 2.0 is a smartphone suitable for use in potenally
explosive atmospheres (zones 1, 21, 2 and 22) in accordance with direc-
ves 94/9/EC (ATEX 95) and 99/92/EC (ATEX 137), as well as the IECEx
scheme.
Ex-markings
ATEX II 2G Ex ib IIC T4 Gb
II 2D Ex ib IIIC T135°C Db IP6X
EPS 13 ATEX 1 579 X
2004
IECEx: Ex ib IIC T4 Gb
Ex ib IIIC T135°C Db IP6X
IECEx EPS 13.0044X
Temperature range: -20 ... +60°C
Manufactured by: i.safe MOBILE GmbH
i_PARK TAUBERFRANKEN 14
97922 Lauda-Koenigshofen
Germany

i.safe MOBILE
Safety Instrucons
7
3 Faults and Damages
If there is any reason to suspect that the safety of the phone has been
compromised, it must be withdrawn from use and removed from any
ex-hazardous areas immediately.
Measures must be taken to prevent any accidental restarng of the
phone.
The safety of the phone may be compromised, if, for example:
· malfuncons occur.
· the housing of the phone or the baery shows damage.
· the phone has been subjected to excessive loads.
· the phone has been stored improperly.
· markings or labels on the phone are illegible.
It is recommended that a phone which shows or which is suspected of
faults and damages is returned i.safe MOBILE GmbH for inspecon.

i.safe MOBILE
Safety Instrucons
8
4 Ex-relevant Safety Regulaons
Use of this phone assumes that the operator observes the convenonal
safety regulaons and has read and understood manual, safety instruc-
ons and cerficate.
The following safety regulaons must also be complied with:
· Inside ex-hazardous areas the phone must be closed. The baery has
to be fixed by the two screws and the cover of the USB interface has
to be closed.
· To ensure the IP-protecon, it has to be ensured that all gaskets are
present and funconal. The screws at the top and the boom of the
back of the phone need to be covered by the black gaskets, so that
the screw heads are not visible. There must be no large gap between
the two halves of the housing. IP protecon is not guaranteed any-
more if the yellow housing can be seen in the gap of the black hous-
ing material.
· The baery may only be exchanged or charged outside ex-hazardous
areas.
· The phone may only be charged outside ex-hazardous
areas using the i.safe PROTECTOR USB-cable or other equipment ap-
proved by i.safe MOBILE GmbH.
· USB-connecons to other equipment are only allowed outside ex-
hazardous areas using the i.safe PROTECTOR USB-cable or other
equipment approved by i.safe MOBILE GmbH.
· Use only the appropriate baery type BPI02A.
· It is not allowed to carry spare baeries into ex-hazardous areas.
· The phone may be charged only at temperatures in between 0°C ...
45°C.
· The phone must not be exposed to abrasive acids or bases.
· The phone must not be taken into zones 0 or 20.
· Only accessories approved by i.safe MOBILE GmbH may be used.

i.safe MOBILE
Safety Instrucons
9
5 Further Safety Advises
· Do not touch the screen of the phone with sharp objects. Dust parti-
cles and nails may scratch the screen. Please maintain the screen
clean. Remove dust on the screen with a so cloth gently, and do not
scratch the screen.
· Charge the phone under indoor condions only.
· Please do not put the phone in environments with excessive temper-
atures, as this could lead to heating of the battery, resulng in fire or
explosion.
· Do not charge the phone near any flammable or explosive substanc-
es.
· Do not charge the phone in environments with much dust, humidity,
or excessively high or low temperatures (the permied charging
temperature range is 0 ... 45°C).
· Do not use the phone in areas where regulaons or legislaves pro-
hibit the use of a mobile phone.
· Do not expose the phone, baery or charger to strong magnec
fields, such as are emied from inducon ovens or micro-waves.
· Do not aempt to open or repair the phone. Improper repair or
opening can lead to the destrucon of the phone, fire or explosion.
Only authorized personnel are allowed to repair the phone.
· Only use accessories approved by i.safe MOBILE GmbH.
· Please do not directly connect the poles of the baery, to avoid
short-circuiting the baery.
· Power off the phone in hospitals or other places where the use of
mobile phones is prohibited. This phone may affect proper work of
medical equipment, such as pacemakers, so always keep a distance
of at least 15 cm between the phone and these devices.
· Observe all corresponding laws that are in force in the respecve
countries regarding the use of mobile phones while operang a vehi-
cle.
· Please power off the phone and disconnect the charging cable before
cleaning the phone.
· Do not use any chemical cleaning agents to clean the phone or the
charger. Use a damp and an-stac so cloth for cleaning.

i.safe MOBILE
Safety Instrucons
10
· Do not discard old and abandoned lithium baeries into the trash,
send them to designated waste disposal locaons or return them to
i.safe MOBILE GmbH.
· The user alone is responsible for any and all damages and liabilies
caused by malware downloaded when using the network or other da-
ta-exchange funcons of the phone. i.safe MOBILE GmbH cannot be
held responsible for any of those claims.
Warning
i.safe MOBILE GmbH will not assume any liability for damages caused by
disregarding any of these advices or by any inappropriate use of the
phone.

i.safe MOBILE
Quick Start
11
Introducon
Dear customer, thank you very much for choosing the INNOVATION 2.0
smartphone. This quick start manual gives you access to the basic func-
ons of the phone.
With IP protecon, rugged housing and a touchscreen, the
INNOVATION 2.0 is the ulmate dual SIM ANDROID smartphone for
zone 1, 2, 21, and 22 explosion hazardous areas.
To ensure the IP protecon of the phone please make sure that the
seals of the baery, the USB port cover and all the screw covers are in
place correctly.
This document contains only the instrucons necessary for seng up
and safe use of your phone. A complete Quick Start Manual can be
found in the root folder of the Micro-SD card of the phone or at
www.isafe-mobile.com.
Please consult 8.7 to learn how to access the Micro-SD card from any
computer.
Please read the Quick Start Manual before using the phone and follow
the ps and advices in order to be able to use the phone for your full
sasfacon and safety.

i.safe MOBILE
Quick Start
12
6 i.safe PROTECTOR
The INNOVATION 2.0 contains specially designed safety circuits.
Connecng the phone to non-ex-approved equipment like a computer
can endanger the safety of the phone, as faults in the non-approved
equipment could lead to a power surge into the phone large enough to
destroy the safety circuits.
The i.safe PROTECTOR is a USB-cable for connecng the phone with
non-ex-approved equipment. It contains addional safety circuits to
protect the phone from possible faults in the non-ex-approved equip-
ment.
For this reason, charging and USB-connecons are only allowed using
the i.safe PROTECTOR.

i.safe MOBILE
Quick Start
13
7 Keys
(1) Power: Lock the phone.
Long press to power up or down the phone.
(2) Menu: Bring up a list of opons.
(3) Home: Returns to the Home Screen.
Long press to see a list of last accessed apps.
(4) Back: Return to the previous screen.
(5) Volume: Context-sensive volume regulaon.
(6) SOS: Long press to acvate the SOS-alert
(7) PTT: Acvate the Push-to-Talk funcon
234
6
7
5
1

i.safe MOBILE
Quick Start
14
8 First Steps
8.1 Baery
The baery is inserted into the back of the phone. The baery is not
fully charged when the phone is purchased, but it contains enough en-
ergy to power on the phone. To obtain best baery performance and
baery life, let the baery discharge completely before charging it
completely for the first three charging cycles.
8.1.1 Installing and Extracng the Baery
When installing the baery, insert the teeth at the boom of the bat-
tery into the corresponding notches of the phone, then press the bat-
tery down and secure it by turning the two screws with the delivered
screw driver (TORX T8). Ensure that the baery is safely in place before
powering on the phone.
Turn the phone upside down, turn the screws and remove the baery.
Insert the battery into the phone as indicated in the pictures below.

i.safe MOBILE
Quick Start
15
8.1.2 Charging the Baery
Connect the i.safe PROTECTOR USB-cable with the phone as indicated
in the picture below:
Connect the plug with the socket of the Power Supply.
Aer charging, remove the USB-cable from the charger.
8.1.3 Baery Use
In actual use, the standby me and talk me of the phone varies with
the network status, working environment and usage.
When the power of the baery is lower than normal, the phone will
prompt you to charge it. Please charge the baery; otherwise you may
lose any files which are not saved.
If you do not charge for a long me, the phone will be powered off au-
tomacally.
Warning
The phone may only be charged at ambient temperatures in a range
from 0°C…45°C. Please do not use charging equipment if the tempera-
ture exceeds this range. Only use the i.safe PROTECTOR USB-cable to
connect to a charger. Using any other cable may cause danger and will
void the warranty.

1
2
i.safe MOBILE
Quick Start
16
8.2 Installaon of the SIM Cards
The phone features two SIM card slots. If you have installed two SIM
cards, you can choose your primary card in <Sengs> → <SIM man-
agement>.
Warning
Do not try to insert or remove any of the SIM cards when any external
power supply is connected, otherwise the SIM cards or the phone may
be damaged.

1
i.safe MOBILE
Quick Start
17
8.3 Installaon of the Micro-SD Card
Open the Micro-SD card holder, and insert the Micro -SD card into the
slot, then close the Micro-SD card holder.
8.4 First Use
8.4.1 Powering On Your Phone
Press the [Power key] unl the screen lights up.
Depending on the security sengs of your SIM card, the phone may ask
you for your personal idenficaon number (PIN) before starng up.
The first me you power on your phone, you may be prompted to as-
sign a language, date and me zone and enter your personal infor-
maon.
You will also be asked to sign in or set up your Google account. You can
do this later but please note that some of the funcons of the phone
like the Google Play Store depend on a Google account.

i.safe MOBILEQuick Start
18
8.4.2 Powering Off Your Phone
1. Press and hold the [Power key] to open the Phone opons menu.
2. Tap <Power off>.
3. Tap <OK>.
8.5 Locking and Unlocking the phone
Press the [Power key] to lock the phone. When the screen is locked,
you can sll receive messages and calls.
If you leave your phone undisturbed for a while, the screen will lock
automacally.
To unlock the phone, press the [Power key] again. Aer the screen has
lit up, drag the lock icon to the unlock icon to unlock the phone.
Depending on your security sengs, the phone may ask for a PIN to
unlock. Please note that this is NOT the PIN of your SIM card, but a code
that can be assigned under <System sengs> → <Security> → <Screen
lock>.

i.safe MOBILE
Quick Start
19
8.6 Using the Touchscreen
This phone features a capacive touchscreen. It is not necessary to
press the screen for it to work, a simple touch is enough.
The following gestures can be used with this phone:
Tap
To open an applicaon (app), or to enter a character using the on-
screen keyboard, tap it with a finger.
Tap and hold
Tap and hold your finger to the screen for more than two seconds to
access further opons where available.
Drag
Tap an icon and hold your finger to the screen. Then drag it to where
you would like to place it.
Double tap
Perform two taps onto a webpage or image to zoom in. Double tap
again to zoom out.
Flick
Touch the screen and flick your finger le, right, up, or down to scroll
through available panels or lists.
Pinch
Touch the screen with two fingers near together. While touching the
screen, put your fingers farther apart to zoom into a webpage or pic-
ture. Do the reverse to zoom out again.
8.7 Connecng the phone with a computer
You can access the Micro-SD Card of the phone by any compable
computer via the i.safe PROTECTOR USB cable. The card will be ac-
cessed as a mass storage device.
1. Connect your phone to the computer with the i.safe PROTECTOR
USB cable. When connecng the phone to a computer for the first
me, the computer will install the necessary drivers automacally.

Home Screen
Quick Access Bar
Status Bar
i.safe MOBILE
Quick Start
20
2. Tap <turn on USB storage> in the dialog box that opens on the
phone and tap <OK> to confirm your choice. Your computer will de-
tect the Micro-SD card as a removable disk. You can now transfer
files from and to the Micro-SD card.
Note
While USB mass storage funcon is enabled, some funcons of the
phone may not be available.
9 Display Layout
Aer you sign in, or when you power on the phone, by default the
Home Screen opens:
The Home Screen is your starng point to access all the features on
your phone. It displays applicaon icons, shortcuts, and other features.
You can customize the Home Screen and display the items you need.
9.1 Status Bar
The status bar appears at the top of every screen.
On the right side, it displays phone status icons, such as the status of
the baery, GPS, data or mobile connecons, and the me.
On the le side, it displays noficaons icons, such as missed calls or
received messages.