iseeBell Video Doorbell User manual

GUIDE
ADJUSTABLE
WALL MOUNT
INSTALLATION
WALL MOUNT
Swivel-ball Knuckle Swivel Fixture Mount Screws
Meet the content in your box of adjustable wall mount
1

WALL MOUNT
3
WALL MOUNT
2
Step 1. Secure your iseeBell
• Pass the wires to the small notch at the
bottom of
the Swivel-ball Knuckle.
• Line up the holes in the Wall Bracket of
iseeBell
Doorbell with the slots on the Swivel- ball
Knuckle.
Notch
Step 2. Install the Swivel Fixture Mount
• Gently pull the wire down.
• Snap the ball of the knuckle into the fixture mount.
• Once done, attach it to any metal surface.
Install the Screws (optional)
To mount it on any surface other than metal, use the
screws and anchors to secure the Fixture Mount.
Tips: Hide the wires
If you prefer to hide the wires, you can also pass the
wires from power adaptor through the center of the
Swivel Fixuture Mount and the Swivel-ball Knuckle.
And the other steps will be the same.