Pair Indoor Chime with iseeBell Outdoor Camera
Errors may occur during pairing
Specification
LED status of Outdoor Camera
1. Indoor Chime is for indoor use only.
2. Do not install the Outdoor Camera on the metal surface or the UPVC door
frame. Otherwise, the working range of the equipment will be shortened.
3. Do not expose devices to rain or water.
4. Keep away from heat sources or fire.
Model
Item
Camera Lens CMOS,1280*720 pixel
WF100
Troubleshooting
Problem
Total can not
work -Power disconnected.
- Check whether the DC power adapter or AC wire
connect well.
-Check whether the wire connect to the right
terminal as required.
-Check whether the wireless router power on.
-Restart wireless router.
-If the network is faulty, pls contact with your
network provider.
Possible causes Solution
1. Plug in the Indoor Chime to an electrical outlet (100-240V) and press the
Paring button on the Indoor Chime. Then touch the on the Outdoor
Camera. Once the Indoor Chime rings, pairing is complete.
2.If you have more than one Indoor Chime to pair:
a. Power off the Outdoor Camera.
b.Power on the Outdoor Camera again, you need to wait for 30 seconds,
then press the pairing button on the second Indoor Chime. Once the second
Indoor Chime rings, pairing is completed. You will need to do the same
processes for your other Indoor Chimes.
3. When Indoor Chime is under signal interference, it will ring without any
operation.
Please unplug the Indoor Chime, and it will automatically reboot and
reset to factory default.
Re-plug the Indoor Chime and re-do the pairing.
reboot and reset to factory default.Please re-connect the power supply
with indoor chime, outdoor camera and indoor chime will enter into
Paring registration mode.
Errors may occur during pairing:
1. Please check if the Indoor Chime is completely plugged in.
2. Please check if the Indoor Chime is located beyond the remote-control
distance from your Outdoor Camera. The remote-control distance is 100
meters/330ft (without any block).
iseeBell APP introduction
1 .When the Outdoor Camera powers on, icon will be blue.
2.When driver is successfully loaded, blue light will be off after 30 seconds.
3.Press RESET to configure WIFI, blue light will flash in a fast pace
during configuration.
4.After connected to WIFI, the blue light will flash in a slow pace.
5.When Outdoor Camera successfully connects to server, icon will be blue.
6.Once PIR is activated, the icon will flash with blue light.
7.When a visitor touches the Touch button , the icon will flash for 75
seconds.
8.When the Outdoor Camera fails to connect to the network. icon will be
white.
Please follow the instruction
to scan the QR code
Scan QR code The device is connecting,
please wait...
Successfully added
My devices
This is where primary users can see their
devices.
Shared devices
This is where users can see the devices
being shared by primary users.
Smart Guard
This is where users can review the
snapshots and videos on the Cloud
storage.
11 12
14 15
17 18
Enter WIFI password Press “RESET” to reset iseeBell
Disclaimer
Caution
IseeBeIl makes no warranties, express or implied, as to the suitability of this
product for any particular purpose or use. IseeBeIl is not liable for any indirect,
incidental, special or punitive damages, claims, property damage or loss of
any data or documents. To the fullest extent permitted by law, IseeBell's
liability is less than the amount you paid for the product.
DC9-24V/1A or AC9~24V/1A
Handfree
DC12V/380mA（MAX）
IP56
-20℃to +50℃
Support 2 . 4Ghz frequency
Working voltage/current
Talk method
Consumption
Ingress Protection
Working temperature
WIFI frequency
Can not call
-The unit disconnected with WIFI.
-WIFI is off.
-Network Faulty.
Can not monitor
from the mobile
phone.
-The unit disconnected with WIFI.
-Check whether the unit power on.
-Check whether the network work well(Whether the
WIFI name, passwordchange?)
-Check whether the network of mobile phone work
well.
For other problems, pls refer to the “FAQ" item in the APP.
10
13
16
19 20 21
S42 5
tes t1 Toda y
One p hoto wa s captu red at 15 :30:0 6
153PCS
144P CS
tes t2 Toda y
One p hoto wa s captu red at 15 :30:0 6
ID: 11134 635 401 xxx xx
Nam e:11134 635 401 xxx xx Modi fy
Fir mware v ersio n:080 1130 960
Dev ice has t he late st firmw are ver sion
Equ ipmen t added s ucces sfull y, ple ase cli ck "Sur e"
add c omple te equi pment .
Sure
