ISTblast DCM100 TO 330 User manual

INSTRUCTION MANUAL
2023-10-03
BEYOND THE SURFACE
Warranty
Safety
Operation
Service Parts
Accessory Information
Registration Form
BAGHOUSE DUST COLLECTORS DCM100 TO 330
120 V

BEYOND THE SURFACE
2
DCM100 to 330 Dust Collector - Instruction Manual & Parts
TABLE OF CONTENTS
Page
BAGHOUSE DUST COLLECTORS DCM100 TO 330............................................................................................................1
INTRODUCTION............................................................................................................................................................................3
NOTICE TO PURCHASERS..........................................................................................................................................................4
GENERAL SAFETY RULES  UNIT USE AND CARE............................................................................................................5
INSTALLATION.............................................................................................................................................................................6, 7
BAGHOUSE DUST COLLECTOR  PARTS LIST & CHARTS ............................................................................................8, 9
ELECTRICAL SHACKER OPTIONAL  INSTALLATION ...................................................................................................10
MAINTENANCE.............................................................................................................................................................................11
ELECTRICAL SCHEMATICS.................................................................................................................................................12 TO 16
ISTBLAST LIMITED WARRANTY ............................................................................................................................................17
INFORMATION / TECHNICAL ASSISTANCE........................................................................................................................18
OUR MAP LOCATION.................................................................................................................................................................19
ABOUT THE COMPANY.............................................................................................................................................................20

BEYOND THE SURFACE
3
DCM100 to 330 Dust Collector - Instruction Manual & Parts
INTRODUCTION
Welcome to the ISTblast® family of sandblasting products.This booklet contains helpful information
and acquaints you with the operation and maintenance of your equipment. Please read carefully
and follow our recommendations to assure trouble free operation. If you have any questions, please
do not hesitate to contact your distributor or our technical service.
1. Carefully inspect the shipping carton for any signs of transport damage. The damage to the carton often
indicates possibility of transport damage to the equipment inside.
2. Carefully remove your ISTblast dust collector from the shipping carton and skid.
3. Check your equipment immediately to ensure that it is free of transport damage. Report any transport
damage to the carrier without delay for possible claim procedures. ISTblast is not responsible for damage to
equipment after it leaves our warehouse.
4. Check the equipment received and compare it with the parts you have received. If any parts are missing,
contact the supplier you purchased the equipment from.
Before operating the ISTblast dust collector, read this Instruction Manual completely. All ISTblast products are
engineered and manufactured to the highest performance standards and have been subjected to detail testing
before shipment from the factory.

BEYOND THE SURFACE
4
DCM100 to 330 Dust Collector - Instruction Manual & Parts
The products described in this material, and the information relating to those products, is intended for
knowledgeable, experienced users of abrasive blasting equipment.
No representation is intended or made as to the suitability of the products described herein for any particular
purpose of application. No representations are intended or made as to the eciency, production rate, or the
useful life of the products described herein.
Any estimate regarding production rates or production nishes are the responsibility of the user and must
be derived solely from the user’s experience and expertise, and must not be based on information in this
material.
The products described in this material may be combined by the user in a variety of ways for purposes
determined solely by the user. No representations are intended or made as to the suitability or engineering
balance of the combination of products determined by the user in his selection, nor as to the compliance
with regulations or standard practice of such combinations of components or products.
It is the responsibility of the knowledgeable, experienced users of the products mentioned in this material to
familiarize themselves with the appropriate laws, regulations and safe practices that apply to these products,
equipment that is connected to these products and materials that may be used with these products.
It is the responsibility of the user to insure that proper training of operators has been performed and a safe
work environment is provided.
Our company is proud to provide a variety of products to the abrasive blasting industry, and we have
condence that the professionals in our industry will utilize their knowledge and expertise in the safe
ecient use of these products.
NOTICE TO PURCHASERS AND USERS OF OUR PRODUCTS
AND THIS INFORMATIONAL MATERIAL

BEYOND THE SURFACE
5
DCM100 to 330 Dust Collector - Instruction Manual & Parts
GENERAL SAFETY RULES
PERSONAL SAFETY
KEEP WORK AREA CLEAN.
KEEP CHILDREN AWAY. Do not let visitors come in contact with the equipment. All visitors should
be kept away from the work area.
GUARD AGAINST ELECTRIC SHOCK. Non-skid footwear is recommended where damp or wet ground
may be encountered. A ground fault circuit interrupter protected power line must be used for these
conditions.
DRESS PROPERLY. Do not wear loose clothing or jewelry. They can be caught in the moving parts. Wear
protective hair covering to contain long hair.
USE SAFETY EQUIPMENT. WEAR SAFETY GOGGLES or glasses with side shields.
WEAR A DUST PROOF MASK.
STAY ALERT. USE YOUR COMMON SENSE. Concentrate on what you are doing. Do not operate the unit
when you are tired or under the inuence of drugs or alcohol.
DO NOT OVERREACH. Keep proper footing and balance at all times.
BEFORE STARTING TO WORK you must wear earing protections, ecient for 80 dB or more.
UNIT USE AND CARE
DO NOT FORCE THE UNIT. It will perform better and safer at the rate for which it was designed.
THE USE OF ANY OTHER ACCESSORIES not specied in this manual may create a hazard.
CLOSE THE MAIN BREAKER SWITCH BEFORE SERVICING or when not in use.
DO NOT ALTER OR MISUSE THE UNIT. These units are precision built. Any alteration or modication not
specied is misuse and may result in a dangerous situation.
Only trained repairmen should attempt ( 
) ALL REPAIRS, electrical or mechanical. Contact the nearest
IST ISTblast repair service facility. Use only IST ISTblast replacement parts; any other parts may create
a hazard.
ENVIRONMENTAL CONDITIONS FOR WHICH THE EQUIPMENT IS DESIGNED
Indoor location
Altitude 6,562 feet max.
Ambient temperature: 104 °F max.
Relative humidity: 80 %
Main supply voltage fluctuation +/-10 %
To use with non-combustible dust only
SANDBLAST CABINET MAY EMIT POTENTIALLY HAZARD DUST AND AIRBORNE CONTAMINANTS DURING OPERATION. YOU
MUST WEAR APPROPRIATE BREATHING PROTECTION AT ALL TIMES WHILE OPERATING OR STANDING AROUND THE UNIT.

BEYOND THE SURFACE
6
DCM100 to 330 Dust Collector - Instruction Manual & Parts
1. The dust collector should be located on a leveled area near the back of the cabinet, while respecting
the laws and regulations in your area. Allow access to components such as the pressure gauge, fan,
door and hatch, the barrel, the cartridges and cleaning system.
2. Make sure the equipment is leveled, installed on a solid surface, and well grounded. Do not place
on a wooden floor or a rubber mat, unless a ground wire has been installed. Check with a qualified
electrician.
3. This dust collector requires an electrical connection. The electrical connections depend on the size
and number of motor phases. Refer to the Electrical drawings on pages 12 to 16.
4. After the installation is complete, verify the direction of rotation of the turbine. To check the
direction of rotation, turn on and turn off the engine quickly to provoke a slow rotation of the
blades. Look inside the slots above the engine where the turbine can be readily observed. The
right direction of rotation is indicated by an arrow. The impeller should rotate toward the blower.
If the rotation is not the same, please notify an electrician so that it performs the necessary change
INSTALLATION
GROUNDING: To prevent static electricity from accumulation, connect the ground wire of the
dust collector to a connection anchored to the factory ground.
5. Check the amperage on initial startup. If the engine uses too much amperage, gradually close the wall until
the data meets the specied amperage of the motor plate. The partition is located at the fan outlet.
ALL ELECTRICAL CONNECTIONS TO THE ISTBLAST EQUIPMENT SHOULD BE MADE BY A QUALIFIED ELECTRICIAN AND MUST
ADHERE TO THE CODES, STANDARDS, AND PROCEDURES SPECIFIED BY THE AUTHORITY HAVING JURISDICTION.
THE CUSTOMER IS RESPONSIBLE FOR PROVIDING APPROPRIATE DISCONNECTING MEANS ADJACENT TO THE
EQUIPMENT FOR EACH INCOMING POWER CIRCUIT.
BEFORE PROCEEDING TO INSTALLATION, THE ELECTRIC POWER SUPPLY MUST BE LOCKED AND TAGGED. FAILURE TO COMPLY
WITH THIS COULD RESULT IN SERIOUS INJURIES DUE TO ELECTRIC SHOCK. .
NEVER LOOK INSIDE THE EXIT OF THE FAN WHEN THE FAN IS RUNNING. FAN EJECTED DEBRIS COULD CAUSE INJURY.
CAUTION
CAUTION

BEYOND THE SURFACE
7
DCM100 to 330 Dust Collector - Instruction Manual & Parts
INSTALLATION
1. Connect one end of the tubular transport of abrasive at
the exit of recycling
1
and the other end at the entrance
at the bottom of the scrubber
2
. Secure each end of the
hose with clamps included with the hose.
2. For dust collector with the dust collecting drum option,
make sure that the drum is properly located under the
dust collector and that it has been correctly secured to it.
3. Connect your shop’s air supply line to the dust collector
air inlet. Your air supply is coupled to the air inlet with
a ¼ inch male quick connect coupling 5(see details
page 7).
To properly operate, your IST system must use clean, dry
air. Use proper filters, air dryers, and air purifying systems
to ensure clean and dry air is supplied.
An isolating valve should be installed at the source of
air (Air Inlet of cabinet) to depressurize the system for
maintenance.
If you use a rigid conduit for your air duct, a flexible section
must be installed to allow the opening of the door.
4. You need a maximum of 80 psi air supply for the
standard, push button, pneumatic dust bag shaker of
your equipment. Just press (more or less 10 times) the
button on the side of the service door before starting
operation.
Air dryer
(optional)
IF YOU USE INTERLOCKING
CONNECTIONS, SECURE THEM WITH PINS.
A CONNECTION THAT DISCONNECTS UNDER
PRESSURE, COULD CAUSE SERIOUS INJURY.
CAUTION
5
1
2

BEYOND THE SURFACE
8
DCM100 to 330 Dust Collector - Instruction Manual & Parts
N° N° PIÈCE
DESCRIPTION
1
Hose : see parts page 9
2
Clips : see parts page 9
3
Fan motor : see table page 9
4
608508
Pneumatic shaker button
5
608408
Flow adjust 10-32
6
632064 ⁄’’ 10-32 MPT hose barb tting
7
608409 ¼’’ reducer for ow adjust
8
-/----»
Air inlet (quick connect ¼’’ M #
607222, & ¼’’ F # 607219)
9
608406
Clevis rod
10
619005
2’’ wheel
11
608405
¾’’ Ø x 3’’ stroke cylinder
12
608407
Bracket for cylinder
13
610280
8» adjustable air inlet
N° N° PIÈCE
DESCRIPTION
14
610287
Complete door handle
15
910223
Door latch
16
601378 Dust Trap
17
618321
Type ‘‘D’’ rubber (sold per foot)
18
616575 Electric Cable
(sold per foot)
19
616406 Electric plug
20
617063 Electric box
21
601309 ‘‘S’’ hook
22
609158
4’’ dust hose sold per foot
23
DB dust bags (see page 9)
24
Option : dust barrel & extens. legs (see page 9)
25
Option : horizontal muer (see page 9)
26
Option : verticalmuer (see page 9)
27
Option : trolley for barrel
9
13
21 10
1
2
3
16
18
19
22
11
12
20
25
24 27
8
26
4
5
14
15
7
6
23
17

BEYOND THE SURFACE
9
DCM100 to 330 Dust Collector - Instruction Manual & Parts
IMPELLER MOTOR
Power
(hp) Voltage Impeller
240 V 380 V
1/2 IST N/A 610525
1 IST N/A 610526
2 IST N/A 610527
3 N/A IST 610528
5 N/A IST 610529
7.5 N/A IST IST
10
N/A IST IST
1
1
2
2
BAGHOUSE DUST COLLECTOR OPTIONS
DUST BARREL OPTION HORIZONTAL
MUFFLER
VERTICAL
MUFFLER
DCM
MODEL
OPTION
NUMBER
BARREL
CAPACITY GAL
DCM1004 601486 15 601434 601423
DCM100 601486 15 601434 601423
DCM160 601487 30 601435 601424
DCM230 601490 30 601436 601425
DCM330 601490 30 601437 601426
21
22 23
FAN MOTOR & SUCTION HOSE
3
CORRUGATED SUCTION HOSES AND CLAMPS
Fan Motor
(hp) Hose ID Hose Clamp
1/2 5’’ 606168 624121
16’’ 606169 624124
27’’ 606171 624127
38’’ 606173 624128
510’’ 606177 624137
12
2
# STOCK
DUST BAGS
601316
DCM100 : DB6HP dust bags (Qty : 16)
DCM160 : DB6HP dust bags (Qty : 25)
DCM230 : DB6HP dust bags (Qty : 36)
601308 DCM330 : DB9HP dust bags (Qty : 36)
20
1

BEYOND THE SURFACE
10
DCM100 to 330 Dust Collector - Instruction Manual & Parts
ELECTRICAL SHACKER OPTIONAL
#STOCK DESCRIPTION
1917850
TIMERS
2324560
¼’’ PUSHIN FITTINGS
3608568
SOLENOID VALVE
4608284
MUFFLER
5 608405 PNEUMATIC CYLINDER
5
For electrical schematic, see pages 12 to 15.
1
3
2
4

346 Allée du Golf Saint-Eustache (Québec) J7R 0M8 Canada
T : 1 877 629-8202 F : 450 963-5122 info@istsurface.
2023-10-03
ISTblast is a registered
trademark of
International Surface Technologies
11
BEYOND THE SURFACE
MAINTENANCE SCHEDULE
For the rst two weeks of use, you should not shake the dust collector’s bags. This will allow the dust to create a thin layer on the inside of the bag, increasing the ltering eciency. It also explains why new bags may leak for the rst hours of use.
EVERY 2,000 HOURS OF OPERATION
DAILY MAINTENANCE & OPERATION
Replace bags
when the dust collector is unable to evacuate the dust cloud
from the cabinet or after
every
2,000 hours of operation.
3. After each use, turn off the impeller and shake bags inside the dust collector.
Never shake bags while the cabinet is running.
4. Empty optional dust barrel or dust collector’s bottom hopper regularly.
Never shake bags while the cabinet is running. Never wash bags, instead use compressed use compressed air, blowing from the outside to the inside of the bag,
(the opposite would clog the bag’s pores and make it unusable).
Bag shacking should never occur while the electric motor is running.
Always wait for complete stop of electric motor to avoid tearing off bags.
1. If your dust collector is equipped with the automatic shacker option, the action will
occur automatically at motor’s shut down
2. Remove dust from the dust collector on a regular basis. Before opening the door,
make sure to have a container under the trap to collect the dust. (picture 1)
If you are equipped with the dust drum option simply open the lid with the ring’s lever (picture 2) and empty dust.
3
# STOCK
DESCRIPTION
3
601316
DB6 BAGHOUSE
Picture 1 Picture 2
2
3
1

BEYOND THE SURFACE
12
DCM100 to 330 Dust Collector - Instruction Manual & Parts
ELECTRICAL SCHEMATIC FOR DCM 50 TO 330 BAGTYPE  120 V / 1 PH  DIAGRAM
CUSTOMER SUPPLY
DCM100 TO 330 1 Ph - 120 V
POWER & CONTROL
1 / 5
1 877 629-8202
1050 Des Forges Street Hwy. 640 Industrial Park
Terrebonne, Qc. J6Y 0P6 Canada
Tel [phone] • 450 963 -4400 • Fax 450 963-

BEYOND THE SURFACE
13
DCM100 to 330 Dust Collector - Instruction Manual & Parts
ELECTRICAL SCHEMATIC FOR DCM 100 TO 330 BAGTYPE  120 V / 1 PH  PARTS LIST
15 A - 120 V MALE PLUG WITH POWER CORD
SOLENOID
Supplier
DCM 100 TO 330 120 V - 1 Ph
PARTS LIST
1 877 629-8202
2 / 5
1050 Des Forges Street Hwy. 640 Industrial Park
Terrebonne, Qc. J6Y 0P6 Canada
Tel [phone] • 450 963 -4400 • Fax 450

BEYOND THE SURFACE
14
DCM100 to 330 Dust Collector - Instruction Manual & Parts
ELECTRICAL SCHEMATIC FOR DCM 100 TO 330 BAGTYPE  3 PH  DIAGRAM
3 / 4
1 877 629-8202
DCM 100 TO 330 3 Ph
POWER & CONTROL
1050 Des Forges Street Hwy. 640 Industrial Park
Terrebonne, Qc. J6Y 0P6 Canada
Tel [phone] • 450 963 -4400 • Fax 450

BEYOND THE SURFACE
15
DCM100 to 330 Dust Collector - Instruction Manual & Parts
ELECTRICAL SCHEMATIC FOR DCM 100 TO 330 BAGTYPE  3 PH  PARTS LIST
Supplier
4 / 5
1 877 629-8202
DCM100 TO 330 3 Ph
PARTS LIST
1050 Des Forges Street Hwy. 640 Industrial Park
Terrebonne, Qc. J6Y 0P6 Canada
Tel [phone] • 450 963 -4400 • Fax 450

BEYOND THE SURFACE
16
DCM100 to 330 Dust Collector - Instruction Manual & Parts
REFERENCE LIST FOR FOR DCM 50 TO 330 BAGTYPE  3 PH
5 / 5
DCM100 À 330 3 Ph
REFERENCE LIST
1 877 629-8202
1050 Des Forges Street Hwy. 640 Industrial Park
Terrebonne, Qc. J6Y 0P6 Canada
Tel [phone] • 450 963 -4400 • Fax 450

BEYOND THE SURFACE
17
DCM100 to 330 Dust Collector - Instruction Manual & Parts
ISTblast warrants all equipment led in this manual which is manufactured by ISTblast and bearing its
name, to be free from defects in material and workmanship on the date of sale by an authorized ISTblast
dristibutor to the original purchaser for use. Notwithstanding any special, extended or limited warranty
published by ISTblast will, for a period ofTWELVE (12) months from the date of sale, repair or replace any part
of the equipment determined by ISTblast to be defective. This warranty applies only when the equipment
is installed, operated and maintained in accordance with ISTblast ’s written rISTblastmmendations.
This warranty does not cover, and ISTblast shall not be liable for general wear and tear, or any malfunction,
damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper
maintenance, negligence, accident, tampering, or substitution of non- ISTblast component parts. Nor shall
ISTblast be liable for malfunction, damage or wear caused by the incompatibility with ISTblast equipment
with structures, accessories, equipment or materials not supplied by ISTblast , or the improper design,
manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not
supplied by ISTblast .
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an
authorized ISTblast dristibutor for verication of the claimed defect. If the claimed defect is veried,
ISTblast will repair or replace free of charge any defective parts. The equipment will be returned to the
original purchaser, transportation prepaid. If the inspection of the equipment does not disclose any defect
in material or workmanship, repairs will be made at a reasonable charge, which charges may include the
costs of parts, labor, and transportation.
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED OR IMPLIED,
INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A
PARTICULAR PURPOSE.
ISTblast ’s sole obligation and the buyer’s sole remedy for any breach of warranty shall be as set forth above.
The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages
for lost prots, lost sales, injury to person or property, or any other incidental or consequential loss) shall be
available. Any action for breach of warranty must be brought forward within one (1) year of the date of sale.
ISTblast MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS
OR COMPONENTS SOLD BUT NOT MANUFACTURED BY ISTblast . These items sold, but not manufactured
by ISTblast (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their
manufacturer. ISTblast will provide the purchaser with reasonable assistance in making any claim for
breach of these warranties.
LIMITATION OF LIABILITY
In no event will ISTblast be liable for indirect, incidental, special or consequential damages resulting from
ISTblast supplying equipment hereunder, or the furnishing, performance, or use of any products or other
goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of ISTblast , or
otherwise.
Report all accidents or“near misses”which involve ISTblast products to:
- Technical Assistance
The following items are not covered under the ISTblast warranty policy:
- Parts or chassis replacement due to normal wears.
Defective material or workmanship is not considered normal wear
ISTBLAST LIMITED WARRANTY

BEYOND THE SURFACE
18
DCM100 to 330 Dust Collector - Instruction Manual & Parts
INFORMATION / TECHNICAL ASSISTANCE
www.istsurface.com
TEL.: [phone] & 450 963-4400
For more information, pricing or technical support, contact your local
IST distributor or call / fax to our Consumer Information numbers:
Or visit us at:
ISTpure is a registered trademark of:

BEYOND THE SURFACE
19
DCM100 to 330 Dust Collector - Instruction Manual & Parts
OUR MAP LOCATION
N

IST
International
Technologies
Surface
P : 877 629-8202
[e-mail]
ISTblast is a registered trademark of
International Surface Technologies
B eyond the surface
WHO WE ARE
IST is a leading manufacturer of equipment for the surface treatment industry and the solvent recycling
industry. Our extensive line of equipment includes batch units and automated machines designed to achieve
the highest manufacturing standards.
MISSION
ISTworks tightlywiththeircustomerstotransformindustrialprocessestoimprovetheirquality,productivity,
and environmental footprint.
INDUSTRIES WE SERVE
OUR SERVICES
Aerospace & Aviation
Aluminium Smelters
Automotive
Construction & Civil Engineering
Flexography (labelling) & Lithography
Foundry & Forge
General Manufacturing
Military
Power & Energy
Rail & Mass Transit
Shipyards
Wood nishing
Custom Design & Fabrication
Installation & Startup
Preventative Maintenance Program
Private Labels
Testing Lab
24/7 Technical Support5656
ABOUT THE COMPANY
IST
International
Technologies
Surface
1050 Des Forges Street
Hwy. 640 Industrial Park
Terrebonne, Quebec
J6Y 0P6 Canada
2023-11-08