iZen Serenity User manual

Deluxe Multi-function Massage Chair SKU: IZ-Serenity
USER MANUAL
iZen by Innovative
1360 North Delsea Drive, Clayton NA 08312
Tel: [phone] option 3
Web: [email protected], www.shopizen.com
Serenity Massage Chair
Instructions for Massage Chair

Below Form Shows The Name And Content Of Hazardous Substance In This Product
Parts Name
Outer Panels
Metal Work
Rubber Piece
Upholstery
Inner Signal
Connecting Cable
Power Cable/
Power Adapter
Circuit Board
Assembly
Restricted Substances
This form is made under the regulation of SJ/T 11364
Circuit Board Assemblies include the spare parts which make up a whole PCB,such as
resistor,capacitor,integrated circuit ,connectors, etc.
Indicates that the concentration of the hazardous substance in all homogeneous materials
in the parts is below the relevant threshold of the GB/T26572 standard.
Indicates that the concentration of the hazardous substance of at least one of all
homogeneous materials in the parts is above the relevant threshold of the GB/T26572
standard.
Pb Hg Cd Cr PBB PBDE
Notes of environment-friendly lifetime
Lifetime of this electrical and electronic products, if operated as set forth in the manual,with
the hazardous substance or element not to emit,neither to pollute the environment nor to cause
harm to person or property, is limited to 10 years.
Thank you for purchasing this product.Please read this user manual
carefully before using appliance to ensure proper operation.
Please keep this USER MANUAL properly for further reference.
CONTENTS
NAME AND FUNCTION OF EACH COMPONENT
APP DOWNLOAD AND INSTALLATION
SAFETY INFORMATION
External Structure
Internal Structure
Controller
Instruction Of Controller
Instruction of Display Screen Menu
Power Box
11
PRELIMINARY CHECKS 13
CARE AND MAINTENANCE
TROUBLE SHOOTING
PRODUCT SPECIFICATIONS
Connect To Power
Best Circumstances
Grounding
Floor Protection
Installation Site
Move Method
Legrest Massage Unit Instruction
Installation Method
Commissioning
Before Sitting
16
16
16
16
17
18
19
Safety Information
Read all warnings carefully before use.
Precautions and warnings listed below will help to ensure proper use of this appliance.
The classes of accidents caused by incorrect use are classified into “WARNING”
and “ CAUTION”, Read all warnings below and follow all instructions within this
manual.
Not Suitable For Below Persons
Controller Precautions
Cautions Regarding The Ac Adapters And Ac Cord
We recommend that those with any of the following conditions should consult your
physician before using.
Improper operation may cause injury to users.
Improper operation may cause users injury or product damage.
Prohibited No Disassemble
Those who are using electronic medical instrument embedded in the body, such as cardiac
pacemaker.
Those undergoing treatment, especially those who are not feeling well.
Those with malignant tumors or malignant abscesses.(Need to be supervised)
Women who are pregnant or menstruating.
Those with osteoporosis or fracture spine.
Those with skin disease or those whose skins are injured.
Those with high fever.
Close supervision is necessary when this product is used by, on, or near children, invalids,
or disabled persons.
Check that the power voltage stated on the rating label corresponds to your local electricity
supply.
Do not use a damp hand to unplug the AC cord to avoid electric shock.
Do not pull on the AC cord,reach to the front end to unplug it.
Do not squeeze the AC cord by the appliance or other heavy objects.
Do not damage,over bend , pull hard, twist or tie the power cord.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or
a similarly qualified person in order to avoid a hazard.
Do not operate the controller or pull the controller cable with damp hand.
Do not spill water or other liquid onto the controller to avoid fault.
Do not lay heavy staff on the controller.
SAFETY INFORMATION
WARNING
CAUTION
WARNING
CAUTION
CAUTION

Safety Information
Read all warnings carefully before use.
Precautions and warnings listed below will help to ensure proper use of this appliance.
The classes of accidents caused by incorrect use are classified into “WARNING”
and “ CAUTION”, Read all warnings below and follow all instructions within this
manual.
Not Suitable For Below Persons
Controller Precautions
Cautions Regarding The Ac Adapters And Ac Cord
We recommend that those with any of the following conditions should consult your
physician before using.
Improper operation may cause injury to users.
Improper operation may cause users injury or product damage.
Prohibited No Disassemble
Those who are using electronic medical instrument embedded in the body, such as cardiac
pacemaker.
Those undergoing treatment, especially those who are not feeling well.
Those with malignant tumors or malignant abscesses.(Need to be supervised)
Women who are pregnant or menstruating.
Those with osteoporosis or fracture spine.
Those with skin disease or those whose skins are injured.
Those with high fever.
Close supervision is necessary when this product is used by, on, or near children, invalids,
or disabled persons.
Check that the power voltage stated on the rating label corresponds to your local electricity
supply.
Do not use a damp hand to unplug the AC cord to avoid electric shock.
Do not pull on the AC cord,reach to the front end to unplug it.
Do not squeeze the AC cord by the appliance or other heavy objects.
Do not damage,over bend , pull hard, twist or tie the power cord.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or
a similarly qualified person in order to avoid a hazard.
Do not operate the controller or pull the controller cable with damp hand.
Do not spill water or other liquid onto the controller to avoid fault.
Do not lay heavy staff on the controller.
SAFETY INFORMATION
WARNING
CAUTION
WARNING
CAUTION
CAUTION

Best Circumstances
Best Practices For Safe Use
Do not use this appliance where temperature is over 40℃.
Do not use this appliance in humid or dusty environment, or when any part of the body is in contact
with plumbing or any similar ground.Keep the air openings free of lint, hair, and the like.
Unplug from outlet during thunder or lightening storms, and before putting on or taking off parts.
Do not use outdoors.
Please place the product on the flat level floor.
Do not store near heat or open flame.
Only for users weighs below 120kg.
Use this product only for its intended use as described in this manual.
Do not use the product for therapeutic treatment purpose.
Appliance should only be used by one person,do not use by two or more persons at the same time
to avoid damage to the products.
Do not use the product right after meal, it may cause discomfort.
Remove the accessories from the arms and empty the pockets while use the massage services.
Check the upholstery under the cushions and other spots, if any damages are present, do not use it
and refer to a qualified service professional for servicing.
If you feel any abnormal discomfort during the operation of this product, turn off the power
immediately and do not use the product.
Use the appliance for 20 minutes each time is highly recommended
Make sure there is no obstacles behind the chair and there is enough clearance before adjusting the
backrest or legrest angle.
Make sure no other excessive load pressed on the backrest or legrest besides the user.
Make sure there is no children,pets or other objects under the backrest or legrest.
Please be seated properly while using the appliance.
Do not drag or push the chair or roll on its caster on wood floor or carpet to avoid damage.
Never operate this product if it has damaged /exposed parts or power leakage.
Do not stand on or stack heavy objects on the footrest.
Children should be supervised to ensure that they do not play with the massage chair.
Do not fall into sleep while the product is operating.
Avoid using the product under the influence of alcohol.
Do not put hands or fingers in any openings of the appliance to avoid injury or damage to the
appliance.
If there is any smoke or unusual smell while using,stop using immediately, unplug the power cord.
Pull out the power cord from the power strips before maintenance. Never plug-in or pull out power
cord with damp hand, to avoid shock or injury.
Pull out the power cord from the power strips while not in use.
Unplug from outlet when the power supply is cut, switch all controls to off.
Do not disassemble this product yourself to avoid failure.
Do not dismantle,fix or modify the yourself, Please contact authorized dealer or service agent.
SAFETY INFORMATION PRODUCT SPECIFICATIONS
Product Name : Deluxe Multi-function Massage Chair
Model Number : RT-6602
Rated Voltage : 220V~
Rated Frequency : 50Hz
Rated Power : 120W
Safety Design : Class I
19
CAUTION
CAUTION
UNPLUG THE
POWER CORD
NO DISASSEMB YL
PROHIBITED
NAME AND FUNCTION OF EACH COMPONENTS
External Structure
Internal Structure
Head Pillow
Back Cushion
Seat Cushion
Legrest
Massage Unit
Audio Speaker
Back Cover
Armrest
Caster
Mechanism Massage Unit
Shoulder Massage Airbags
Arm Massage Airbags
Calf Massage Airbags
Foot Massage Rollers
No. Symptoms Possible Causes Possible Sollutions
Shoo or clatter
sound is heard
Appliance start failure
Backrest or legrest can
not raise or recline
Airbag malfunction
No music from the
speaker after the
bluetooth is connected
If problem remains, please contact the dealer for maintenance.
Tips:Do not attempt to repair this product yourself,our company shall not be liable
for the injury or damage caused by any servicing without authorization.
No need to take any
measures
The power cord is not
secured into the socket
Power switch is off
The fuse is blown
The volume is turned to the lowest Adjust the speaker volume
from the mobile devices
Excessive load pressed on
the backrest or legrest
The air hose may be blocked
Relieve the load and try
again
Straighten the air hose and
clear out the blockage
Replace only with a fuse
of same type and rating
Turn on the switch
Secure the Power plug
Normal working sound
of motor or massage balls
rubbing against the cloth
cover
TROUBLE SHOOTING
18

Best Circumstances
Best Practices For Safe Use
Do not use this appliance where temperature is over 40℃.
Do not use this appliance in humid or dusty environment, or when any part of the body is in contact
with plumbing or any similar ground.Keep the air openings free of lint, hair, and the like.
Unplug from outlet during thunder or lightening storms, and before putting on or taking off parts.
Do not use outdoors.
Please place the product on the flat level floor.
Do not store near heat or open flame.
Only for users weighs below 120kg.
Use this product only for its intended use as described in this manual.
Do not use the product for therapeutic treatment purpose.
Appliance should only be used by one person,do not use by two or more persons at the same time
to avoid damage to the products.
Do not use the product right after meal, it may cause discomfort.
Remove the accessories from the arms and empty the pockets while use the massage services.
Check the upholstery under the cushions and other spots, if any damages are present, do not use it
and refer to a qualified service professional for servicing.
If you feel any abnormal discomfort during the operation of this product, turn off the power
immediately and do not use the product.
Use the appliance for 20 minutes each time is highly recommended
Make sure there is no obstacles behind the chair and there is enough clearance before adjusting the
backrest or legrest angle.
Make sure no other excessive load pressed on the backrest or legrest besides the user.
Make sure there is no children,pets or other objects under the backrest or legrest.
Please be seated properly while using the appliance.
Do not drag or push the chair or roll on its caster on wood floor or carpet to avoid damage.
Never operate this product if it has damaged /exposed parts or power leakage.
Do not stand on or stack heavy objects on the footrest.
Children should be supervised to ensure that they do not play with the massage chair.
Do not fall into sleep while the product is operating.
Avoid using the product under the influence of alcohol.
Do not put hands or fingers in any openings of the appliance to avoid injury or damage to the
appliance.
If there is any smoke or unusual smell while using,stop using immediately, unplug the power cord.
Pull out the power cord from the power strips before maintenance. Never plug-in or pull out power
cord with damp hand, to avoid shock or injury.
Pull out the power cord from the power strips while not in use.
Unplug from outlet when the power supply is cut, switch all controls to off.
Do not disassemble this product yourself to avoid failure.
Do not dismantle,fix or modify the yourself, Please contact authorized dealer or service agent.
SAFETY INFORMATION PRODUCT SPECIFICATIONS
Product Name : Deluxe Multi-function Massage Chair
Model Number : RT-6602
Rated Voltage : 220V~
Rated Frequency : 50Hz
Rated Power : 120W
Safety Design : Class I
19
CAUTION
CAUTION
UNPLUG THE
POWER CORD
NO DISASSEMB YL
PROHIBITED
NAME AND FUNCTION OF EACH COMPONENTS
External Structure
Internal Structure
Head Pillow
Back Cushion
Seat Cushion
Legrest
Massage Unit
Audio Speaker
Back Cover
Armrest
Caster
Mechanism Massage Unit
Shoulder Massage Airbags
Arm Massage Airbags
Calf Massage Airbags
Foot Massage Rollers
No. Symptoms Possible Causes Possible Sollutions
Shoo or clatter
sound is heard
Appliance start failure
Backrest or legrest can
not raise or recline
Airbag malfunction
No music from the
speaker after the
bluetooth is connected
If problem remains, please contact the dealer for maintenance.
Tips:Do not attempt to repair this product yourself,our company shall not be liable
for the injury or damage caused by any servicing without authorization.
No need to take any
measures
The power cord is not
secured into the socket
Power switch is off
The fuse is blown
The volume is turned to the lowest Adjust the speaker volume
from the mobile devices
Excessive load pressed on
the backrest or legrest
The air hose may be blocked
Relieve the load and try
again
Straighten the air hose and
clear out the blockage
Replace only with a fuse
of same type and rating
Turn on the switch
Secure the Power plug
Normal working sound
of motor or massage balls
rubbing against the cloth
cover
TROUBLE SHOOTING
18

Fuse
Power Socket
Power Switch
NAME AND FUNCTION OF EACH COMPONENTS
Care and Maintenance Instructions
Power Box
Storage Methods
Warm Tips
To treat stains on back panel,armrest,footrest ,plastic parts or air hose,spot clean
with mild detergent foam,then wipe it with a dry cleaning cloth.
To treat stains on controller,power box,spot clean with a dry cleaning cloth.
To treat stains on back cushion or pillows,use a water-based upholstery cleaner
only,wipe it with moist cloth,then air dry.
To clean the foot/calf unit covers,remove it from the chair,hand wash with a mild
detergent,then line dry.
Keep the product free from dust.Cover the product with a dust-free cloth to prevent
collection of dust if not in use for a long period of time.
Do not leave this product exposed to direct sunlight for long periods of time. This
may cause fading or damage.
Please stop using the product to avoid breakdowns or accidents if any above
symptom spotted.
Switch off the power button and disconnect the plug , contact the local distributors
or supplier for repair.
All other servicing except above care and maintenance should be serviced by an
authorized dealer or service center.
Pull out the power cord from the power strips before care and maintenance.
To avoid electrical shock or injury,do not touch the power cord with
wet hands.Do not try to dismantle or repair the product yourself,please
send your massage chair to the authorized service center.
Pull out the power cord from the power strips before care and maintenance.To
avoid electrical shock or injury,do not touch the power cord with wet hands.Make
sure no detergent enter into the power box while cleaning.
Do not use benzene,thinner or other solvents on your product,it may cause fading
or damage to the product.
Do not iron the upholstery.
CAUTION
CAUTION
CAUTION
CAUTION
WARNING
During daily use, please check for the following symptoms:
Burnt smell.
The product experiences unusual power ON/OFF when touching the power cord.
Hot power cord.
Other abnormal symptoms.
CARE AND MAINTENANCE
17
Children should be supervised to ensure that they do not play with the massage
chair to avoid accident.
Always unplug the massage chair from the electrical outlet immediately after use.
Unplug from outlet during thunder or lightening storms, and before putting on or
taking off parts.
Turn off the power switch and unplug the massage chair from the electrical outlet
while not in use to avoid children start the massage chair accidentally.
When not in use for a long period of time,we recommend that the chair be covered,
the power cord be coiled and that the unit be placed in an environment free of dust
and moisture.
LCD Display
Screen
Menu
Left
Power/Restore
Legrest Unit Up
Legrest Unit Down
Up
Down
Back Heat
Zero Gravity
Position
Shoulder Position
Adjust
Auto Program
Confirm
Right
Manual Program
Back Incline
Back Recline
NAME AND FUNCTION OF EACH COMPONENTS
Controller
Floor Protection
Installation Site
We recommend to place a piece of carpet or soft mat underneath it to avoid
Clearance Space for the massage chair:
Make sure there is an adequate clearance for the massage chair installation.Please
allocate a minimum 15 centimeter distance clearance for the back of the product.
Please allocate a minimum 20 centimeter distance clearance for the front of the
product.
damaging the floor.
Massage Chair
Floor
Carpet
Best Circumstances
Grounding
Do not use the massage chair in high moisture environment to prevent electric
shock accident.
Please keep the massage chair away from heated surfaces to prevent fire hazard
or damage to the product.
This product must be grounded, the plug must be plugged into an appropriate
3-wire grounded outlet that is properly installed and grounded in accordance
with all local codes and ordinances to reduce risk of electrical shock.
20cm 15cm
PRELIMINARY CHECKS
16

Fuse
Power Socket
Power Switch
NAME AND FUNCTION OF EACH COMPONENTS
Care and Maintenance Instructions
Power Box
Storage Methods
Warm Tips
To treat stains on back panel,armrest,footrest ,plastic parts or air hose,spot clean
with mild detergent foam,then wipe it with a dry cleaning cloth.
To treat stains on controller,power box,spot clean with a dry cleaning cloth.
To treat stains on back cushion or pillows,use a water-based upholstery cleaner
only,wipe it with moist cloth,then air dry.
To clean the foot/calf unit covers,remove it from the chair,hand wash with a mild
detergent,then line dry.
Keep the product free from dust.Cover the product with a dust-free cloth to prevent
collection of dust if not in use for a long period of time.
Do not leave this product exposed to direct sunlight for long periods of time. This
may cause fading or damage.
Please stop using the product to avoid breakdowns or accidents if any above
symptom spotted.
Switch off the power button and disconnect the plug , contact the local distributors
or supplier for repair.
All other servicing except above care and maintenance should be serviced by an
authorized dealer or service center.
Pull out the power cord from the power strips before care and maintenance.
To avoid electrical shock or injury,do not touch the power cord with
wet hands.Do not try to dismantle or repair the product yourself,please
send your massage chair to the authorized service center.
Pull out the power cord from the power strips before care and maintenance.To
avoid electrical shock or injury,do not touch the power cord with wet hands.Make
sure no detergent enter into the power box while cleaning.
Do not use benzene,thinner or other solvents on your product,it may cause fading
or damage to the product.
Do not iron the upholstery.
CAUTION
CAUTION
CAUTION
CAUTION
WARNING
During daily use, please check for the following symptoms:
Burnt smell.
The product experiences unusual power ON/OFF when touching the power cord.
Hot power cord.
Other abnormal symptoms.
CARE AND MAINTENANCE
17
Children should be supervised to ensure that they do not play with the massage
chair to avoid accident.
Always unplug the massage chair from the electrical outlet immediately after use.
Unplug from outlet during thunder or lightening storms, and before putting on or
taking off parts.
Turn off the power switch and unplug the massage chair from the electrical outlet
while not in use to avoid children start the massage chair accidentally.
When not in use for a long period of time,we recommend that the chair be covered,
the power cord be coiled and that the unit be placed in an environment free of dust
and moisture.
LCD Display
Screen
Menu
Left
Power/Restore
Legrest Unit Up
Legrest Unit Down
Up
Down
Back Heat
Zero Gravity
Position
Shoulder Position
Adjust
Auto Program
Confirm
Right
Manual Program
Back Incline
Back Recline
NAME AND FUNCTION OF EACH COMPONENTS
Controller
Floor Protection
Installation Site
We recommend to place a piece of carpet or soft mat underneath it to avoid
Clearance Space for the massage chair:
Make sure there is an adequate clearance for the massage chair installation.Please
allocate a minimum 15 centimeter distance clearance for the back of the product.
Please allocate a minimum 20 centimeter distance clearance for the front of the
product.
damaging the floor.
Massage Chair
Floor
Carpet
Best Circumstances
Grounding
Do not use the massage chair in high moisture environment to prevent electric
shock accident.
Please keep the massage chair away from heated surfaces to prevent fire hazard
or damage to the product.
This product must be grounded, the plug must be plugged into an appropriate
3-wire grounded outlet that is properly installed and grounded in accordance
with all local codes and ordinances to reduce risk of electrical shock.
20cm 15cm
PRELIMINARY CHECKS
16

Instruction Of Controller
Power:Press this button to power on/off the remote.
Shoulder Position Adjust ( slightly adjust mechanism
up/down the shoulder)
Menu
Auto Program Button
Manual Program Button
Navigation
Heat
Turn on/off Zero Gravity Position.
Press this button while connect to power to show the menu display,
the LCD screen is lit,use the Up/Down/Left/Right buttons to navigate the
screen, press OK to select.
Press this button again to turn off the product.
Display the Auto Program,Manual Program,Airbags,Heat, Roller and
Setting function.(Check the Display Menu for detailed information)
Press and hold on Shoulder Position Adjust button to adjust the
rollers to the desired position while under manual program.
Press and hold on Shoulder Position Adjust button to adjust the
rollers to the desired position while under the body scan procedure.
Display the Auto Program menu.when an auto program is running,
press this button to toggle among the auto programs.the active program
displays at the top of the status screen.(Check the Display Menu for
detailed information.)
Display the Manual Program Menu.Press this button to toggle among
MODE,PART,WIDTH and SPPED,you may choose a desired massage
technique from 6 pre-set massage modes. (Check the Display Menu for
detailed information)
Use the Up/Down/Left/Right buttons to navigate the screen,
press OK to select.
While Auto massage program is running,press Left/Right button
to change the Airbag massage intensity.
Turn on/off back heat function.Press this button to turn on back heat function,
the heat icon on LCD display is lit;press this button again to turn off back heat
function,the heat icon on LCD display turns to gray.
Press this button to turn on zero gravity position,the zero gravity icon on
LCD display is lit;press this button again to turn off zero gravity position,
the zero gravity icon on LCD display turns to gray.
OK
NAME AND FUNCTION OF EACH COMPONENTS PRELIMINARY CHECKS
CAUTION
Do not move the chair when there is user inside.
To carry this product, do not lift by the footrest or armrest,hold the chassis and
steady the backrest(have 4 or more people to carry the product).
CAUTION
Please verify that there is no damage to the supply cord before plug in.
Please verify that the main power switch is turned off before connecting to power.
Connect this appliance to a 3-wire properly grounded
outlet.
Turn on the main power switch located to the lower
back of the right armrest.
Connect To Power
Move Method
Roll the chair on its casters to the desired location.
Incline the backrest to upright position.
Turn off the power switch and unplug the appliance from the electrical outlet.
Using two people,push down on the backrest and lift up on the front side by grabbing
the moving holder located to the front bottom of the armrest,roll the chair on its
casters to the desired location(check the sketch for reference)
15
Instruction of Display Screen Menu
AUTO PROGRAM
Press to display the Auto Program menu,press this button to toggle among 9 Auto
Program: RECOVERY,RXTEND,RELAX,REFRESH,UPPER AUTO,LOWER
AUTO, BOSS NURSING,QUEEN SUMMING, SOUL SPA.Press OK to enter the
program you desire.Selected program will show on the home screen.(Check below
Menu photo for reference)
Press and hold to incline the backrest;Release the button to stop.
Press and hold to retract the footrest;release the button to stop.(Make sure
there is no obstruction in advance)
Press and hold to extend the footrest;release the button to stop.(Make sure
there is no obstruction in advance)
Press and hold to recline the backrest,Release the button to stop.
Recovery:Designed for after work recovery,it helps to release the fatigue and speed
recovery.
Extend:Inspired by Thai style massage,featured in extension and stretching,this massage
program uses strong kneading and stretching techniques to relax tired muscles and keep
them flexible.
Relax:Designed for morning or midday relaxation,it helps to boost the viability of muscles.
ROLLER
Press arrow keys to select
ROLLER
Press arrow keys to select
RECOVERY
RXTEND
RELAX
REFRESH
UPPER AUTO
LOWER AUTO
Back Incline
Footrest Extend
Footrest Retract
Back Recline
NAME AND FUNCTION OF EACH COMPONENTS
PRELIMINARY CHECKS
Commissioning
Before Sitting
CAUTION
Use the controller to recline the backrest to the ultimate angle,lift and extend the
footrest to the maximum, make sure there is enough clearance before commissioning.
Reset the chair after commissioning and turn off the power switch.
(To choose the massage program, please check the Instruction of Controller for
reference)
Verify that the Legrest Massage Unit is well secured onto the main chair.
Make sure all components is restored.if not,switch on the power and restore
completely.
Do not take seat while the legrest is lifted.
Do not put excessive load on the legrest to avoid damage.
Connect the power cable to the product power socket located at the power box
of the product.(Check below illustration for reference)
14

Instruction Of Controller
Power:Press this button to power on/off the remote.
Shoulder Position Adjust ( slightly adjust mechanism
up/down the shoulder)
Menu
Auto Program Button
Manual Program Button
Navigation
Heat
Turn on/off Zero Gravity Position.
Press this button while connect to power to show the menu display,
the LCD screen is lit,use the Up/Down/Left/Right buttons to navigate the
screen, press OK to select.
Press this button again to turn off the product.
Display the Auto Program,Manual Program,Airbags,Heat, Roller and
Setting function.(Check the Display Menu for detailed information)
Press and hold on Shoulder Position Adjust button to adjust the
rollers to the desired position while under manual program.
Press and hold on Shoulder Position Adjust button to adjust the
rollers to the desired position while under the body scan procedure.
Display the Auto Program menu.when an auto program is running,
press this button to toggle among the auto programs.the active program
displays at the top of the status screen.(Check the Display Menu for
detailed information.)
Display the Manual Program Menu.Press this button to toggle among
MODE,PART,WIDTH and SPPED,you may choose a desired massage
technique from 6 pre-set massage modes. (Check the Display Menu for
detailed information)
Use the Up/Down/Left/Right buttons to navigate the screen,
press OK to select.
While Auto massage program is running,press Left/Right button
to change the Airbag massage intensity.
Turn on/off back heat function.Press this button to turn on back heat function,
the heat icon on LCD display is lit;press this button again to turn off back heat
function,the heat icon on LCD display turns to gray.
Press this button to turn on zero gravity position,the zero gravity icon on
LCD display is lit;press this button again to turn off zero gravity position,
the zero gravity icon on LCD display turns to gray.
OK
NAME AND FUNCTION OF EACH COMPONENTS PRELIMINARY CHECKS
CAUTION
Do not move the chair when there is user inside.
To carry this product, do not lift by the footrest or armrest,hold the chassis and
steady the backrest(have 4 or more people to carry the product).
CAUTION
Please verify that there is no damage to the supply cord before plug in.
Please verify that the main power switch is turned off before connecting to power.
Connect this appliance to a 3-wire properly grounded
outlet.
Turn on the main power switch located to the lower
back of the right armrest.
Connect To Power
Move Method
Roll the chair on its casters to the desired location.
Incline the backrest to upright position.
Turn off the power switch and unplug the appliance from the electrical outlet.
Using two people,push down on the backrest and lift up on the front side by grabbing
the moving holder located to the front bottom of the armrest,roll the chair on its
casters to the desired location(check the sketch for reference)
15
Instruction of Display Screen Menu
AUTO PROGRAM
Press to display the Auto Program menu,press this button to toggle among 9 Auto
Program: RECOVERY,RXTEND,RELAX,REFRESH,UPPER AUTO,LOWER
AUTO, BOSS NURSING,QUEEN SUMMING, SOUL SPA.Press OK to enter the
program you desire.Selected program will show on the home screen.(Check below
Menu photo for reference)
Press and hold to incline the backrest;Release the button to stop.
Press and hold to retract the footrest;release the button to stop.(Make sure
there is no obstruction in advance)
Press and hold to extend the footrest;release the button to stop.(Make sure
there is no obstruction in advance)
Press and hold to recline the backrest,Release the button to stop.
Recovery:Designed for after work recovery,it helps to release the fatigue and speed
recovery.
Extend:Inspired by Thai style massage,featured in extension and stretching,this massage
program uses strong kneading and stretching techniques to relax tired muscles and keep
them flexible.
Relax:Designed for morning or midday relaxation,it helps to boost the viability of muscles.
ROLLER
Press arrow keys to select
ROLLER
Press arrow keys to select
RECOVERY
RXTEND
RELAX
REFRESH
UPPER AUTO
LOWER AUTO
Back Incline
Footrest Extend
Footrest Retract
Back Recline
NAME AND FUNCTION OF EACH COMPONENTS
PRELIMINARY CHECKS
Commissioning
Before Sitting
CAUTION
Use the controller to recline the backrest to the ultimate angle,lift and extend the
footrest to the maximum, make sure there is enough clearance before commissioning.
Reset the chair after commissioning and turn off the power switch.
(To choose the massage program, please check the Instruction of Controller for
reference)
Verify that the Legrest Massage Unit is well secured onto the main chair.
Make sure all components is restored.if not,switch on the power and restore
completely.
Do not take seat while the legrest is lifted.
Do not put excessive load on the legrest to avoid damage.
Connect the power cable to the product power socket located at the power box
of the product.(Check below illustration for reference)
14

ROLLER
Press arrow keys to select
Refresh:Focusing on tight and sore muscles,it helps to relieve waist,back and neck
pain.
Lower Auto/Lower Auto：Choose the target zone as
desired.
Boss Nursing:Delivers an intense massage focusing on
relieving sore and tension in the neck and shoulders,
bringing utmost relief and comfort for users who spend
long hours at desk.
Queen Slimming:Adopts mild massage techniques to
relax muscles in the back and waist,helping to shape body
figure and promote metabolism.
Soul Spa:Designed for morning or midday relaxing,it
helps to boost the viability of muscles.
Press MANUAL from MENU display,press Up or Down button to navigate among:
MODE,PART,WIDTH,SPEED.
Massage Mode:Press MODE from MANUAL display,press Right button then
press UP or DOWN button to navigate among:Kneading,Knocking,Sync,Tapping,
Shiatsu,and Rhythm massage techniques.Press OK button to enter the setting you
desire.Selected mode will show on the home screen.
Back Mechanism Massage Part:Press PART from MANUAL display,press Right
button then press Up or Down button to navigate among:Whole,Partial and Point
massage zones.Press OK button to enter the setting you desire.Selected setting will
show on the home screen.
MANUAL PROGRAM
NAME AND FUNCTION OF EACH COMPONENTS
Installation Method
Step 1:
Step 2:Install the controller unit
Take all massage chair units out of the cartons
Unpack the cartons:take out all upholstery unit,accessories out of the cartons.
Before beginning installation,please verify that all components are included
(check with the packing list carefully)
Take the controller unit out of the accessories box;
Connect the data line of the controller to the port to the lower inner side of the right
armrest(pay attention to the convex and concave of the connector and port),then tighten
the screw cap clockwise.(Check the illustration below for reference)
Controller Component
PRELIMINARY CHECKS
13
ROLLER
Press arrow keys to select
Press AIRBAG from MENU display to show the AIRBAG display,press Right
button then press Up or Down button to navigate between:PART-Air pressure
region and Force-Air pressure intensity,Press OK button to enter the setting you
desire.
Part-Air pressure region:Press PART from AIRBAG display,press Right button
then press Up or Down button to navigate among: Full,Arm&Shoulder,Leg&Foot,
airbag positions.Press OK button to enter the airbag position you desire.
Force-Air pressure intensity:Press FORCE from AIRBAG display,press Right
button then press Up or Down button to navigate among: level 1,2,3,4,5 airbag
intensity, or OFF (deactivate airbag intensity function),Press OK button to enter the
airbag setting you desire.
Back Mechanism Massage Width:Press WIDTH from MANUAL display,press
RIGHT button then press Up or Down button to navigate among:Width,Medium
and Narrow mechanism roller width.Press OK button to enter the setting you desire.
Selected width will show on the home screen.
Mechanism Massage Speed:Press Speed from MANUAL display,press Right
button then press Up or Down button to navigate among: level 1,2,3,4,5,6 Mechanism
massage intensity. Press OK button to enter the intensity level you desire.
AIRBAGS
NAME AND FUNCTION OF EACH COMPONENTSPRELIMINARY CHECKS
Homescreen Display With The Auto Program Running Homescreen Display With The Manual Program Running
Tips:
1.In the process of Auto or Manual Setting,LCD screen will auto revert back to the
homescreen after 10 seconds if there is no operation entered into the remote control.
TIPS
Do not disassemble this product yourself to avoid product failure.
Make sure no water or other liquid enters into the controller to avoid fault.
Do not pinch or squeeze the controller or power cord.
CAUTION
12
While appliance is running．press twice MENU button to revert to homescreen．
Under the homescreen display, press Left or Right button to adjust the airbag
intensity(works in the process of both Auto and Manual program);
Press Auto button to select auto massage program．
EXTEND

ROLLER
Press arrow keys to select
Refresh:Focusing on tight and sore muscles,it helps to relieve waist,back and neck
pain.
Lower Auto/Lower Auto：Choose the target zone as
desired.
Boss Nursing:Delivers an intense massage focusing on
relieving sore and tension in the neck and shoulders,
bringing utmost relief and comfort for users who spend
long hours at desk.
Queen Slimming:Adopts mild massage techniques to
relax muscles in the back and waist,helping to shape body
figure and promote metabolism.
Soul Spa:Designed for morning or midday relaxing,it
helps to boost the viability of muscles.
Press MANUAL from MENU display,press Up or Down button to navigate among:
MODE,PART,WIDTH,SPEED.
Massage Mode:Press MODE from MANUAL display,press Right button then
press UP or DOWN button to navigate among:Kneading,Knocking,Sync,Tapping,
Shiatsu,and Rhythm massage techniques.Press OK button to enter the setting you
desire.Selected mode will show on the home screen.
Back Mechanism Massage Part:Press PART from MANUAL display,press Right
button then press Up or Down button to navigate among:Whole,Partial and Point
massage zones.Press OK button to enter the setting you desire.Selected setting will
show on the home screen.
MANUAL PROGRAM
NAME AND FUNCTION OF EACH COMPONENTS
Installation Method
Step 1:
Step 2:Install the controller unit
Take all massage chair units out of the cartons
Unpack the cartons:take out all upholstery unit,accessories out of the cartons.
Before beginning installation,please verify that all components are included
(check with the packing list carefully)
Take the controller unit out of the accessories box;
Connect the data line of the controller to the port to the lower inner side of the right
armrest(pay attention to the convex and concave of the connector and port),then tighten
the screw cap clockwise.(Check the illustration below for reference)
Controller Component
PRELIMINARY CHECKS
13
ROLLER
Press arrow keys to select
Press AIRBAG from MENU display to show the AIRBAG display,press Right
button then press Up or Down button to navigate between:PART-Air pressure
region and Force-Air pressure intensity,Press OK button to enter the setting you
desire.
Part-Air pressure region:Press PART from AIRBAG display,press Right button
then press Up or Down button to navigate among: Full,Arm&Shoulder,Leg&Foot,
airbag positions.Press OK button to enter the airbag position you desire.
Force-Air pressure intensity:Press FORCE from AIRBAG display,press Right
button then press Up or Down button to navigate among: level 1,2,3,4,5 airbag
intensity, or OFF (deactivate airbag intensity function),Press OK button to enter the
airbag setting you desire.
Back Mechanism Massage Width:Press WIDTH from MANUAL display,press
RIGHT button then press Up or Down button to navigate among:Width,Medium
and Narrow mechanism roller width.Press OK button to enter the setting you desire.
Selected width will show on the home screen.
Mechanism Massage Speed:Press Speed from MANUAL display,press Right
button then press Up or Down button to navigate among: level 1,2,3,4,5,6 Mechanism
massage intensity. Press OK button to enter the intensity level you desire.
AIRBAGS
NAME AND FUNCTION OF EACH COMPONENTSPRELIMINARY CHECKS
Homescreen Display With The Auto Program Running Homescreen Display With The Manual Program Running
Tips:
1.In the process of Auto or Manual Setting,LCD screen will auto revert back to the
homescreen after 10 seconds if there is no operation entered into the remote control.
TIPS
Do not disassemble this product yourself to avoid product failure.
Make sure no water or other liquid enters into the controller to avoid fault.
Do not pinch or squeeze the controller or power cord.
CAUTION
12
While appliance is running．press twice MENU button to revert to homescreen．
Under the homescreen display, press Left or Right button to adjust the airbag
intensity(works in the process of both Auto and Manual program);
Press Auto button to select auto massage program．
EXTEND

ROLLER
Press arrow keys to select
On
Off
Off
HEAT
ROLLER
Press arrow keys to select Press arrow keys to select
ROLLER
ROLLER
SETTINGS
HEAT
NAME AND FUNCTION OF EACH COMPONENTS PRELIMINARY CHECKS
Press HEAT from MENU
display,then press Up or
Down button to turn on
or off back heat function.
ROLLER
Press ROLLER from Menu
Display,then press Up or
Down button to toggle
among speed level 1,2,3
and off.
Time:
Press TIME from SETTING to show available timer:
10min,20min,30min．press Right button then press
Up or Down button to navigate,press OK button to
enter the timer you desire.
Language:
Press LANGUAGE from SETTING to show available
language:中文,EN.press Right button then press Up or
Down button to navigate,press OK button to enter the
1anguage you desire.
Bluetooth:
From BLUETOOTH.press Right button then press Up or Down button to activate
or deactivate Bluetooth function. press OK button to enter the setting you desire．
Notes：All Settings listed above will be memorized and no need to set again with
power failure.
Press SETTING from MANUAL display,press OK button to enter SETTING
display,Then press Up or Down button to navigate among:TIME,LANGUAGE,
BLUETOOTH.Press OK button to enter the setting you desire.
CAUTION
While pairing your mobile device with the massage chair,please verify that the
massage chair and the blue tooth is set to “ON”.
Download app and control the chair from an Android or iOS device,below is the
instructions:
For an iOS device:
Open the App Store on your iOS device (iPhone, iPad, or iPod touch),use keyword
“RT6602”to search,download it to your device and have it set up.while setup
completed,open it and switch the Blue Tooth to “ON”,pair it with the massage chair.
(Note:Version of iOS device need to be above 4.0)
For an Android device:
Supplier will email the app to customer,download it to your device and have it set
up.while setup completed,open it and switch the Blue Tooth to “ON”,pair it with the
massage chair.
(Note:Version of Android device need to be above 5.0 and with Blue Tooth function)
APP DOWNLOAD AND INSTALLATION
Press arrow keys to select
ROLLER