Jabra Evolve2 75 User manual

User manual
Jabra
Evolve2 75

5
ENGLISH
1. Welcome
Thank you for using the Jabra Evolve2 75. We
hope you will enjoy it!
Jabra Evolve2 75 features
• 8-mic technology for crystal-clear calls
• Discreet hide-away boom arm
• Up to 36 hours battery + fast charge
• Jabra Advanced Active Noise Cancellation™
• Improved comfort with dual-foam tech
• Works with all leading UC platforms

6
ENGLISH
2. Jabra Evolve2 75
overview
*requires Microsoft Teams headset variant
Left Right
Busylight
Busylight/
Microsoft Teams
status
Volume up/
Next track Answer or end call/
Open Microsoft
Teams notification*
HearThrough/ANC
O (hold)
Charging pins
for charging stand
(optional)
USB-C charge port
Status LED
Power on or o/Pairing
Play/pause music
Volume down/
Restart or prev. track
Mute or unmute
microphone/
Activate Voice
Assistant

7
ENGLISH
2.1 Included accessories
Jabra Link 380 USB-C
Bluetooth adapter
Jabra Link 380 USB-A
Bluetooth adapter
USB-A to USB-C
cable
USB-A version
USB-C version
USB-C to USB-C
cable
Carry pouch
2.2 Optional accessories
Desk stand
(charging only)
Replacement ear cushions

8
ENGLISH
3. How to wear
3.1 Adjusting the headset
Adjust the headband so that the headset fits
your head comfortably.

9
ENGLISH
3.2 Positioning the microphone
boom arm
Pull the microphone boom arm down or up in
one smooth motion.
When using the microphone, the tip of the
boom arm should be positioned close to your
mouth.

10
ENGLISH
4. How to charge
The headset can be charged using the optional
desk stand, or via a USB charging cable plugged
directly into the headset.
It takes approx. 2 hours and 40 minutes to fully
charge the battery. The headset battery life is
up to 36 hours. If the headset is out of battery,
it can be charged for 15 minutes to get 6 hours
of battery life.

11
ENGLISH
4.1 Charge using the desk stand
(optional accessory)
Connect the desk stand to a powered USB port
on your computer using the supplied USB
charging cable, and then dock the headset on
the desk stand. The desk stand is used for
charging only.
Powered USB port
The Busylight and Status LED on the headset
will flash briefly to indicate the headset has
been correctly docked with the desk stand.
The battery LED will then briefly flash green,
yellow or red to indicate the current battery
charging status. When the LED turns solid
green, the headset is fully charged.

12
ENGLISH
4.2 Charge using USB charging cable
Plug the USB charging cable into the USB-C
charging port on the left earcup and any
available USB port on your computer. It is
recommended to charge the headset using the
supplied Jabra charging cable, however it is
possible to use a compatible charger.

13
ENGLISH
4.3 Power saving modes
The headset has two levels of power saving
modes: nap mode.and sleep mode.
NAP MODE
When the headset is powered on, but not being
worn, it will automatically enter nap mode to
conserve battery. To exit nap mode, simply
wear the headset.
SLEEP MODE
When the headset has been in nap mode for 8
hours it will automatically enter sleep mode to
further conserve battery. To exit sleep mode,
simply press any button.
The length of time before the headset enters
sleep mode can be adjusted using the Jabra
Sound+ app on your smartphone or Jabra
Direct on your computer.
After 24 hours of sleep mode, the headset will
power down completely. To power the headset
on, slide the On/Off switch to Off and then On.

14
ENGLISH
5. What the LEDs mean
BUSYLIGHTMICROSOFT*LED
Busylight
Incoming call
(slow flash) Headset is trying
to connect to Microsoft
Teams. Will time out after 10
seconds*
(fast flash) Microsoft Teams
notification*
STATUS LED
Busylight
LED
Busylight/Microsoft
Teams LED
Power on/Battery full
Battery medium
Battery low
Battery critically low
Pairing mode
Resetting/Firmware
updating
Headset docked in
optional charging stand
*requires Microsoft Teams headset variant
JABRA LINK 380 LED
Microphone muted
Plugged into computer
and signed into Microsoft
Teams*
(slow flash) Headset is
trying to connect to
Microsoft Teams. Will time
out after 10 seconds*
(fast flash) Microsoft
Teams notification*
Bluetooth connection
Streaming music/media
Incoming call/Active call

15
ENGLISH
6. How to connect
6.1 Connect to computer
Plug the supplied Jabra Link 380 into a USB port
on your computer. The Jabra Evolve2 75 and the
Jabra Link 380 are pre-paired and ready for use
out of the box. The Bluetooth range is up to 30
meters or 100 feet.
To hear audio in the headset you may need to
select the Jabra Link 380 as the playback device
in your operating system’s audio settings.
To manually pair the Jabra Evolve2 75 with the
Jabra Link 380, download and use Jabra Direct.

16
ENGLISH
6.2 Pair with a smartphone
1. Slide the On/Off switch to the Bluetooth
position and hold it there until the LED
flashes blue and you hear an announcement
in the headset.
2. Go to the Bluetooth menu on your
smartphone and select the Jabra Evolve2 75
from the list of available devices.
When pairing to an Android device with Google
Fast Pair enabled, simply put the headset into
pairing mode and you will be prompted on your
nearby Android device if you wish to pair the
headset.
Left earcup

17
ENGLISH
7. How to use
Left Right
Volume down/
Restart or prev. track
*requires Microsoft Teams headset variant
Volume up/
Next track
HearThrough/ANC
O (hold)
Mute or unmute
microphone/
Activate Voice
Assistant
Power on or o/Pairing
Play/pause music
Answer or end call/
Open Microsoft
Teams notification*
7.1 Power on/o
Slide the On/Off switch to the On or Off
position to power the headset on or off.

18
ENGLISH
7. 2 Calls & music
Right earcup Calls & music
Play/pause
music
Press the Play/Pause
button
Answer call
Press the Answer/End
call button
Alternatively, move
the microphone boom
arm down to answer
an incoming call. See
section 7.10
End call Press the Answer/End
call button
Reject call
Double-press the
Answer/End call
button

19
ENGLISH
Adjust volume
Press the Volume up or
Volume down button,
when listening to music
or on a call
Next track Press and hold (1 sec)
the Volume up button
Restart track
Press and hold (1 sec)
the Volume down
button to restart the
current track
Press and hold twice to
play the previous track
Turn Busylight
on/o
Press the Volume up
and Volume down
buttons at the same
time. You will hear
‘Busy’ or ‘Available’ in
the headset
Hear battery
and connection
status
Press the Volume up or
Volume down button,
when not listening to
music or on a call

20
ENGLISH
Activate Voice
Assistant (i.e.
Siri, Google
Assistant,
Amazon Alexa)
Press the Voice button,
when not on a call
Mute/unmute
microphone
Press the Voice button,
when on a call
Alternatively, move the
microphone boom arm
up to mute, or down to
unmute. See section
7.9
Bring Microsoft
Teams to
foreground on
computer
Press the Microsoft
Teams button* (when
signed into Microsoft
Teams)
Join active
Microsoft Teams
meeting
Press the Microsoft
Teams button* (when
signed into Microsoft
Teams)
View Microsoft
Teams missed
calls and
voicemails
Press the Microsoft
Teams button* (when
signed into Microsoft
Teams)
*requires Microsoft Teams headset variant

21
ENGLISH
Left earcup Sound modes
Cycle between
ANC and
HearThrough
Press the Sound
modes button
Turn o Sound
modes
Press and hold (1 sec)
the Sound modes
button
7. 3 On-head detection
The headset has built-in sensors that can
detect when the headset is being worn and will
perform different actions depending on
whether the headset is being worn or not.

22
ENGLISH
AUTO-PAUSE MUSIC
When listening to music, taking off the headset
will automatically pause the music. Wear the
headset again to automatically resume the
music.
MUTE CALL
When you are on a call, taking off the headset
will automatically mute the call. Wear the
headset again to automatically unmute the call.
BUSYLIGHTS
The Busylight LEDs will only light up red when
the headset is being worn.
MICROSOFT TEAMS STATUS*
The Microsoft Teams status LED will only
indicate Microsoft notifications when the
headset is not being worn.
Head detection and each individual action can
be configured using the Jabra Sound+ app on
your smartphone or Jabra Direct on your
computer.
*requires Microsoft Teams headset variant

23
ENGLISH
7.4 Switching microphones
To use the earcup microphones instead of the
boom arm microphone, raise the boom arm and
then press the Voice button.
Voice
button
12
To use the boom arm microphone instead of
the earcup microphones, lower the boom arm
all the way down.
The microphone performance is best when
using the boom arm microphone.
For Microsoft Teams headset variants, this
functionality needs to be enabled using the
Jabra Sound+ app or Jabra Direct on your
computer.