Jabra GN9350e User manual

Jabra GN9350e
How to connect my Jabra GN9350e with Alcatel IP Touch 4028
EE, 4038 EE, 4068 EE
Jabra GN9350e + Jabra LINK 14201-20
In combination with one of the following phones:
IP Touch 4028 EE
IP Touch 4038 EE
IP Touch 4068 EE
EE = Extended Edition
Connection:
Connect the EHS adapter to the GN9350e base as follows:
1. Insert the supplied RJ9 to RJ9 connection cable into the socket of your
Jabra GN9350 base marked "phone" and the other end into the socket
of the EHS adapter marked with the "phone" symbol.
2. Now connect the end of the RJ45 to RJ45 connection cable (EHS
adapter) marked in red with the socket of the EHS adapter marked with
"AUX" and the socket of your Jabra GN9350e base marked with "AUX".
3. Now connect the RJ9 to 3.5 mm jack connection cable marked white
"D" to the socket of the EHS adapter marked with "Headset/Handset"
and with the headset socket of your phone.
4. Now connect the RJ12 to RJ12 connection cable marked orange "A" to
the socket of the EHS adapter marked "COM" and the "bell" socket of
your phone.
Please note that full functionality is only available when all the colour-
marked parts of the cables are inserted into the EHS adapter, see photo.
28/06/2021 23:48
https://www.jabra.in/supportpages/jabra-gn9350e/9356-607-403/faq/53031b6e-3f3a-
4bbe-b9ce-2d0dc8a123ba
Page 1 of 4

Software setup:
In the LCD Display, set the Jabra GN9350 to "DHSG" and press the OK
button to confirm the software setting.
Base setup:
Set the phone set-up switch to "A".
Headset answer/end:
As soon as the dial tone signal can be heard in the headset, you can answer
the call by pressing the "answer/end" button on the headset; by pressing
again the call is ended.
28/06/2021 23:48
https://www.jabra.in/supportpages/jabra-gn9350e/9356-607-403/faq/53031b6e-3f3a-
4bbe-b9ce-2d0dc8a123ba
Page 2 of 4

Phone setup with system software version 9.xx and higher:
No settings are required on the phone for the use of a headset. Following
the correct adaptation of the audio jack, a headset symbol should appear
in the "Phone display". If the headset symbol does not appear, please
check the following settings:
Menu> Settings> Phone> Audio Jack> Select/ Activate Headset.
Phone setup with system software version below version 9.xx:
Important: The "Force Headset" function must not be activated on the
phone, as otherwise it will not be possible to accept external calls!
Menu> Settings> Phone> Audio Jack> Force Headset OFF
Menu> Settings> Phone> Socket > Activate Headset
Ringtone transfer / phone setup:
Important: The dial tone signal in the headset is only transmitted if one of
the following ringtones is used, e.g., Standard / Classic / Cold River /
Dooing-Dooing. > Menu> Settings> Dial Tone > Internal / External
28/06/2021 23:48
https://www.jabra.in/supportpages/jabra-gn9350e/9356-607-403/faq/53031b6e-3f3a-
4bbe-b9ce-2d0dc8a123ba
Page 3 of 4

Should the dial tone signal transfer not work although you have set up the
correct ringtone, please check the following settings:
Menu > Settings > Phone > Internal/External, More Options
No sound, Progressive, Beeps> all points must be set to "OFF".
28/06/2021 23:48
https://www.jabra.in/supportpages/jabra-gn9350e/9356-607-403/faq/53031b6e-3f3a-
4bbe-b9ce-2d0dc8a123ba
Page 4 of 4