Jabra JX20 - Pura - Headset User manual

GettinG started

1
enGlish
JABRA JX20 PURA
enGlish
THANKYOU....................................................2
ABOUTYOURJABRAJX20PURA................................2
WHATYOURHEADSETDOES...................................3
GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
CHARGEYOURHEADSET.......................................4
TURNING YOUR HEADSET ON AND OFF . . . . . . . . . . . . . . . . . . . . . . . . 5
PAIRINGITWITHYOURPHONE.................................5
WEARINGSTYLE ...............................................6
HOWTO….....................................................6
WHATTHELIGHTSMEAN ......................................8
MULTIPOINTFUNCTION........................................8
TROUBLESHOOTING&FAQ ....................................9
NEEDMOREHELP?............................................10
TAKING CARE OF YOUR HEADSET . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
WARNING!....................................................10
WARRANTY...................................................12
CERTIFICATION ...............................................14
GLOSSARY....................................................14

2
enGlish
JABRA JX20 PURA
thank you
Thank you for purchasing the Jabra JX20 PURA headset. We hope
you enjoy it! This user manual will get you started and ready to
make the most of your headset.
about your Jabra JX20 Pura
JX20 PURA headset:
1
Light indicator (LED)
2
Charging socket
3
On/o switch
(rotate earpiece 90 degrees)
Fig. 1
JX20 PURA deskstand:
1
Light indicator
2Charging socket
Fig. 2
Eargel Earhooks
Fig. 3
1
3
4
2
6
2
Accessories:
5
1
4
Answer/end buttom
5
Volume up & down
6
Earhook connection

3
enGlish
JABRA JX20 PURA
What your headset does
Your Jabra JX20 PURA lets you do all this:
• Answer calls
• End calls
• Reject calls*
• Voice dialing*
• Last number redialing*
• Call waiting*
• Put call on hold*
• Multipoint - connect to two Bluetooth devices at the same time
Specications:
• Up to 6 hours talk time/standby time up to 200 hours
• Rechargeable battery with charging option from AC power
supply, PC via USB cable, or deskstand
• Less than 12 grams
• Operating range up to 10 meters (approx. 33 feet)
• Headset and hands-free Bluetooth proles
• Bluetooth specication (see glossary) version 2.0
GettinG started
You should follow three steps before using your headset:
1. Charge your headset.
2. Activate Bluetooth on your mobile phone (refer to the
manual for your mobile phone).
3. Pair your headset to your mobile phone.
The Jabra JX20 PURA is easy to operate. The answer/end button
on the headset performs dierent functions depending on how
long you press it.
* Phone dependent

4
enGlish
JABRA JX20 PURA
Instruction Duration of press
Tap Press briey
Press Approx. 1 seconds
Press and hold More than 3 seconds
CharGe your headset
Make sure that your Jabra JX20 Pura headset is fully charged
before you start using it. Use the AC adapter to charge from a
power socket, or charge directly from your PC with the USB cable
provided.
Please note: The lifetime of the battery will be signicantly reduced
if your device is left uncharged for a long period. We therefore
recommend that you recharge your device at least once a month.
1. Charging from your deskstand:
• Connect your USB cable/AC adapter to the deskstand. Place
your JX20 Pura headset in the deskstand as shown in g. 2.
2. Battery status indicators:
• When the headset is charging, it will indicate the amount of
power in the battery.
Charging your headset from AC adapter or USB cable:
What you see What this means
LED ashes once 0-25% charged
LED ashes twice 25-50% charged
LED ashes three times 50-75% charged
LED ashes four times 75%-100% charged
LED soild white Fully charged

5
enGlish
JABRA JX20 PURA
Charging your headset from your deskstand:
What you see What this means
LED o No device in deskstand
1st. LED solid Device in deskstand
1st. LED solid, 2nd. LED pulsing 0-25% charged
1+2 LED solid, 3rd. LED pulsing 25-50% charged
1+2+3 LED solid, 4th. LED pulsing 50-75% charged
1+2+3 +4 LED solid, 5th. LED pulsing 75-100% charged
All LED´s solid Fully charged
Check Battery status:
• When you are not in a call, tap either volume button.The LED
will ash in accordance with the AC adapter/USB charger
sequence above.
turninG your headset on and off
• Gently turn the earpiece 90° clockwise to turn on the headset
(see g. 1).
• Gently turn the earpiece 90° anti-clockwise to turn o the
headset (see g. 1).
PairinG it With your Phone
The rst time you turn on your Jabra JX20 Pura it will automatically
enter pairing mode. In this case skip directly to point 2 below.
When pairing with a second device, or if you need to pair
manually, start with point 1 below.
1. Put the headset in pairing mode:
• Turn the headset on.
• Press and hold the answer / end button until the LED on the
back shines continuously.

6
enGlish
JABRA JX20 PURA
2. Set your Bluetooth phone to‘discover’ the Jabra JX20 PURA:
• Follow your phone’s user manual. This usually involves going
to a “Setup,”“Connect” or “Bluetooth” menu on your phone and
selecting the option to search or add a Bluetooth device.
3. Your phone will nd the Jabra JX20 PURA:
• Your phone will nd the headset under the name “JX20 PURA”.
Your phone then asks if you want to pair with the headset.
Accept by pressing ‘Yes’ or ‘OK’ on the phone and conrm
with the passkey or PIN = 0000 (4 zeros). Your phone will
conrm when pairing is complete.
JX20 PURA
JX20 PURA
JX20 PURA
In case of unsuccessful pairing, put the Jabra JX20 PURA into
pairing mode manually (see pairing section).
WearinG style
The Jabra JX20 PURA is ready to wear without an earhook – simply
insert it in your right or left ear. If you prefer to use the earhook,
attach the earhook to the earhook connection (see g.1).
For optimal performance, wear the Jabra JX20 PURA and your
mobile phone on the same side of your body or within line of
sight. In general, you will get better performance when there are
no obstructions between your headset and your mobile phone.
hoW to
Answer a call
• Tap the answer/end button on your headset to answer a call.
End a call
• Tap the answer/end button to end an active call.

7
enGlish
JABRA JX20 PURA
Reject a call *
• Press the answer/end button when the phone rings to reject an
incoming call. Depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
hear a busy signal.
Make a call
• When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
headset. If your phone does not allow this feature, tap on the
Jabra JX20’s PURA answer/end button to transfer the call to the
headset.
Activate voice dialing*
• Tap the answer/end button. For best results, record the voice-
dialling tag through your headset. Please consult your phone’s
user manual for more information about using this feature.
Redial last number *
• Double tap the answer/end button when the headset is on
and not in use.
Adjust sound and volume *
• Press the volume buttons (up or down) to adjust the volume
(see g.1).
Call waiting and placing a call on hold*
This lets you put a call on hold during a conversation and answer
a waiting call:
• Press the answer/end button once to put the active call on hold
and answer the waiting call.
• Press the answer/end button to switch between the two calls.
• Tap the answer/end button to reject an incoming call.
* Functions marked with * are dependent on your phone
supporting these features. Check your phone’s user manual for
further information.

8
enGlish
JABRA JX20 PURA
What the liGhts mean
What you see What this means about your
headset
Solid light The headset is in pairing
mode
Quick ash every 5 seconds
for 1 minute
Connected and not on active
call (reappears if you have
asked for battery status)
LED ashing for 1 second,
then 1½ second pause then
repeats
Incoming call
LED ashing twice and then
turning o
Pairing succeeded
LED ashes once then solid
white
Pairing failed
LED ashes once 0-25% charged
LED ashes twice 25-50% charged
LED ashes three times 50-75% charged
LED ashes four times 75%-100% charged
LED soild white Fully charged
multiPoint funCtion
The Jabra JX20 Pura is capable of having two mobile phones
(or other Bluetooth devices) connected to the headset at the
same time. This will give you the freedom of having only one
headset for both of your mobile phones.
To use multipoint function:
• Pair and connect phone A (see automatic pairing section).
• Pair and connect phone B (or other Bluetooth device).

9
enGlish
JABRA JX20 PURA
The primary phone at this stage is B, as this is the last device
you paired.
• Now reconnect phone A as described in your phone’s menu.
• Press the answer/end button on the headset to switch primary
phone settings from B to A and vice-versa.
• Your headset will remember which phone you last used for an
outgoing call and this will remain the primary device.
troubleshootinG & faQ
I hear crackling noises:
• For the best audio quality, always wear your headset on the
same side of the body as your mobile phone.
I cannot hear anything in my headset:
• Increase the volume in the headset.
• Ensure that the headset is paired with the phone (see pairing
section of manual).
• Make sure that the phone is connected to the headset – if it
does not connect either from the phone’s Bluetooth menu
or by tapping the answer/end button, follow the pairing
instructions.
I am having pairing problems:
• You may have deleted your headset pairing connection in your
mobile phone. Follow the pairing instructions.
Will the Jabra JX20 PURA work with other Bluetooth equipment?
• The Jabra JX20 PURA is designed to work with Bluetooth
mobile phones. It can also work with other Bluetooth devices
that are compliant with Bluetooth version 1.1 or higher
and support a headset, hands-free and/or advance audio
distribution prole.
I cannot use reject call, call on hold, redial or voice dialling:
• These features are dependent on the ability of your phone
to support a hands-free prole. Even if the hands-free prole
is implemented, reject call, call hold and voice dialing are
optional features which are not supported by all devices. Please
consult your device manual for details.