Jack Richeson Bassett 886044 Administrator Guide

HOW TO ASSEMBLE THE
Bassett Easel
#886044 Made from Lyptus® Wood
Lyptus®is a registered trademark of Weyerhaueser.
Imported Easels by Jack Richeson & Co., Inc. - Kimberly, WI - Phone: [phone] - www.richesonart.com 11/02
PICTURE #3
PICTURE #1 3⁄4" Round
Head Screws
2" Round
Head Screws
w/ Plastic Socket
PICTURE #2
5⁄8" Countersunk
Head Screws
2" Round
Head Screws
w/ Plastic Socket
11⁄2" Countersunk
Head through Mast
Guide Block
PICTURE #4
1⁄2" Round Head
Screw for Tray Lock

HOW TO ASSEMBLE THE
Bassett Easel
#886044 Made from Lyptus® Wood
Lyptus®is a registered trademark of Weyerhaueser.
Jack Richeson & Co., Inc. P.O. Box 60, Kimberly, WI 54136-0160 1-800-833-2378 fax:[phone] richesonart.com
NOTE: To assure stability of easel, use wood glue.
Make sure the easel is put together correctly FIRST, before using glue to permanently insert wooden dowels.
PICTURE #5
PICTURE #6
11⁄2" Round
Head Screw
11⁄2" Carriage Bolt
w/ Wing Nut
Thumb Screw
Pre-Inserted
2" Carriage Bolt
w/ Wing Nut and
Plastic Washer