JAKO JKBTNX4 User manual

Unescalable format
www.jako.biz
Product performance:
Home door lock, suitable for the indoor door lock
Suitable to 38-50mm thickness door
1.- Determine the door direction
Stand outside of the door
adjust the direction of the handle
and latch bolt according to the
opening direction
when installing the door.
2.- Change lock body direction
When installing the lock body, the latch bolt is on the upper side,
the dead bolt is on the lower side, and the inclined surface
of the latch bolt is facing the opening direction
1.- Reserve the lock body and latch bolt is down
2.- Pusg the latch bolt lower than front plate, stopblock is down
and rotate 180 degrees
3.- Push the latch bolt into hole
4. Install lock body & Install strike box
Mounting the lock body to
the door with two screws
requires that the lock body
be installed and kept parallel
to the door panel
Strike box
Strike plate
Screw
Screw
Door panel
Lock body
3.- Cutting template
1.- Please refer template carefully
to drill hole
2.- If tere is a deviation in the hole,
the lock body and panel assembly
are put into the door and the hole
is corrected until appropriate.
Screw hole
Screw hole
Lock hole
Handle hole
Cylinder hole
Remind
Left Open Right Open
Latch bolt
Stopblock
Plate
Dead
bolt
JKBTNX4
INSTALLATION GUIDE
BLUETOOTH SMART DIGITAL DOOR LOCK

Unescalable format
Handle Reversing Method
1. Remove the cross screw as the drawing and turn the handle
180 degrees in the direction of the arrow.
2.After adjusting the direction of the handle, then install the
cross screw to the original position and tighten in to complete
the reversing
Handle reversing method as below drawing:
As shown, the “Left” and “Right” on
the spare parts as the arrow.
Please operate it and follow the left and
right as diagram
Caution:
The hexagon screw it must be
permanently fixed and the handle
reversing without
disassembling
5.- Install lock
Front panel and back panel docking
power cord
Back panel
Front panel
www.jako.biz
R
Right
single
Left
single

Unescalable format
www.jako.biz
Diagram of installation direction (X1)
Door direction: Right open
Door direction: Left open
The triangle symbol corresponds
to thw rotation to the
corresponding “double” position
Opening direction: right open
“right” on the accessories
The triangle symbol corresponds
to the rotation to the
corresponding “double” position
Back panel
Opening direction: right open
“Left” on the accessories
Front panel
Right
single
Double
Right
single