Jason.L Horizon Workstation 3 Person Run User manual

ASSEMBLY INSTRUCTIONS
Horizon Workstation
3 Person Run
Size: 1600mm
Tools Required: Power screwdriver.
2 persons required for installation
Special Note: No pre-drilled holes or nut inserts are
provided. Wood screws will be required to be drilled
directly into underside of desk top.
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au

Screen x3 (1600mm)
Desk legs x4
Desk leg foot insert x8
L-Shaped post bracket x6
Desk top x3 (1600mm x 800mm)
Cantilever brackets x6
1
2
3
4
5
6
25mm Woodscrews x487
COMPONENTS
SCREWS
Page 2 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Horizon Workstation
3 Person Run
Size: 1600mm
5
1
2
3
4
6

Attach the top plates to the legs.
Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Horizon Workstation
3 Person Run
Size: 1600mm
Build the 2 outside legs with 1 cantilever bracket attached to each leg.
03
Build the centre legs with 2 cantilever brackets attached to each leg
(for 2 person run or more).
0201
Using an Allen key remove top 2 caps from all screens uprights. Bring two
partition towards one another and slide the 2 way connector rod - down
between the two screen uprights.
04

Page 4 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Horizon Workstation
3 Person Run
Size: 1600mm
Attach desktops to the legs.
05
06
Use l-shaped panel bracket to secure the screen to the desktop by
placing the bracket in the middle of the screen and under the desktop.