Jason.L Horizon Workstation 2 Person Run User manual

ASSEMBLY INSTRUCTIONS
Horizon Workstation
2 Person Run
Size: 1200mm
Tools Required: Power screwdriver.
2 persons required for installation
Special Note: No pre-drilled holes or nut inserts are
provided. Wood screws will be required to be drilled
directly into underside of desk top.
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au

Screen x2 (1200mm)
Desk legs x3
Desk leg foot insert x6
L-Shaped post bracket x4
Desk top x2 (1200mm x 800mm)
Cantilever brackets x4
1
2
3
4
5
6
25mm Woodscrews x327
COMPONENTS
SCREWS
Page 2 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Horizon Workstation
2 Person Run
Size: 1200mm
5
1
2
3
4
6

Attach the top plates to the legs.
Page 3 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Horizon Workstation
2 Person Run
Size: 1200mm
Build the 2 outside legs with 1 cantilever bracket attached to each leg.
03
Build the centre leg with 2 cantilever brackets attached to the leg
(for 2 person run or more).
0201
Using an Allen key remove top 2 caps from all screens uprights. Bring two
partition towards one another and slide the 2 way connector rod - down
between the two screen uprights.
04

Page 4 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Horizon Workstation
2 Person Run
Size: 1200mm
Attach desktop to the legs.
05
06
Use l-shaped panel bracket to secure the screen to the desktop by
placing the bracket in the middle of the screen and under the desktop.