Jason.L Horizon User manual

Horizon privacy screen
Sizes: 1200 / 1600 mm wide / 820 mm height
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 1 of 5
ASSEMBLY INSTRUCTIONS

STEP 02STEP 01
Step 1: Please leave 25mm gap between table tops (A) so we can place screen between them.
Step 2: Please assemble L-shape brackets on both sides.
Horizon privacy screen
Sizes: 1200 / 1600 mm wide / 820 mm height
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Page 2 of 5
ASSEMBLY INSTRUCTIONS
A

Horizon privacy screen
Sizes: 1200 / 1600 mm wide / 820 mm height
Need help!
Call us on
1300 527 665
www.jasonl.com.au
STEP 03 STEP 04
Page 3 of 5
Step 3: Once the L-shape brackets are assembled, please place the screen in between the two L-Shape brackets.
Step 4: Please move forward the two L-shape brackets and tighten the screws to clamp screen from both sides. Repeat this step to assemble
the second pair of L-shape brackets on the other end of the workstation.
ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS
Horizon privacy screen
Sizes: 1200 / 1600 mm wide / 820 mm height
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Step 5: Please put L brackets cover on both sides and each ends.
Assembly is
fully completed
Page 4 of 5
STEP 05

Horizon privacy screen
Sizes: 1200 / 1600 mm wide / 820 mm height
Need help!
Call us on
1300 527 665
www.jasonl.com.au
ASSEMBLY INSTRUCTIONS
Page 5 of 5
STEP 06
Using an Allen key remove top 2 caps from screens uprights. The two partitions should be next to each other.
Please slide the 2 way connector rod - down between the two screen uprights.
If you purchased a 2, 4 or 6
person bench workstations.