Jason.L Switch System Boardroom User manual

INSTALLATION GUIDE
Switch System
Boardroom
Size: 2400mm x 1200mm
Tools Required: Power screwdriver.
Special Note: No pre-drilled holes or nut inserts are provided.
Wood screws will be required to be drilled directly into underside of desk top.
Page 1 of 4
Need help!
Call us on
1300 527 665
www.jasonl.com.au

Table Top x2 (1200x1200mm)
Leg x4
Leg Bracket x4
Beam Bracket x8
Switch Long Beam x2 (2000mm)
Switch Short Beam x2 (800mm)
L-Bracket x10
1
2
3
4
5
6
7
Hex Nut x4
L-Bracket screws x10
Hex Head screws x16
M8x25mm Dome Head x4
8
9
10
11
COMPONENTS
SCREWS
Page 2 of 4
INSTALLATION GUIDE
Switch System
Boardroom
Size: 2400mm x 1200mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
6
5
4
3
7
911
2
1
8

Page 3 of 4
INSTALLATION GUIDE
Switch System
Boardroom
Size: 2400mm x 1200mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Join 3 L-Bracket through each Long Beam
and 2 L-Bracket through each Short Beam.
Join Leg Brackets to each Leg using screws to secure them, as follow.
Securely connect each Beam to each Beam Bracket. Screw to secure. Insert Hex Nut on each Beam Bracket.
01
03 04
02

Page 4 of 4
INSTALLATION GUIDE
Switch System
Boardroom
Size: 2400mm x 1200mm
Need help!
Call us on
1300 527 665
www.jasonl.com.au
Position as presented, and proceed to screw
to ensure each corner of the frame.
05
Directly screw into table tops, using L-Bracket
screws through each L-Bracket.
06