jcb 527-58 T4F User manual

OPERATOR'S MANUAL
LOADALL (ROUGH TERRAIN VARIABLE REACH TRUCK)
527-58 T4F
EN - 9831/2450 ISSUE 3 - 04/2018
THIS MANUAL SHOULD ALWAYS STAY WITH THE MACHINE

OPERATOR'S
MANUAL
LOADALL (ROUGH TERRAIN
VARIABLE REACH TRUCK)
527-58 T4F
EN - 9831/2450 - ISSUE 3 - 04/2018
This manual contains original instructions, verified by
the manufacturer (or their authorized representative).
Copyright 2018 © JCB SERVICE
All rights reserved. No part of this publication may
be reproduced, stored in a retrieval system, or
transmitted in any form or by any other means,
electronic, mechanical, photocopying or otherwise,
without prior permission from JCB SERVICE.
www.jcb.com
Foreword
The Operator's Manual
You and others can be killed or seriously injured
if you operate or maintain the machine without
first studying the Operator's Manual. You must
understand and follow the instructions in the
Operator's Manual. If you do not understand
anything, ask your employer or JCB dealer to
explain it.
Do not operate the machine without an Operator's
Manual, or if there is anything on the machine you
do not understand.
Treat the Operator's Manual as part of the machine.
Keep it clean and in good condition. Replace the
Operator's Manual immediately if it is lost, damaged
or becomes unreadable.
Machine Delivery and Installation
Even if you have operated this type of equipment
before, it is very important that your new machines
operations and functions are explained to you by
a JCB Dealer Representative following delivery of
your new machine.
Following the installation you will know how to gain
maximum productivity and performance from your
new product.
Please contact your local JCB dealer if the
Installation Form (included in this manual) has not
yet been completed with you.
Your local JCB Dealer is
Find manuals at https://best-manuals.com

Table of Contents
i 9831/2450-3 i
Contents Page No.
Acronyms Glossary ........................................................................................................................................ ix
Introduction
About this Manual
Model and Serial Number ..................................................................................................................... 1
Using the Manual .................................................................................................................................. 1
Left-Hand Side, Right-Hand Side ......................................................................................................... 1
Cab/Canopy .......................................................................................................................................... 1
Cross References ................................................................................................................................. 2
Safety
Safety - Yours and Others .................................................................................................................... 3
Safety Warnings .................................................................................................................................... 3
General Safety ...................................................................................................................................... 4
Clothing and Personal Protective Equipment (PPE) ............................................................................ 5
About the Product
Introduction
General .................................................................................................................................................. 7
Name and Address of the Manufacturer .............................................................................................. 7
Product Compliance .............................................................................................................................. 7
Description
General .................................................................................................................................................. 8
Intended Use ......................................................................................................................................... 8
Log Moving/Object Handling ................................................................................................................. 8
Optional Equipment and Attachments .................................................................................................. 8
Danger Zone ......................................................................................................................................... 8
Main Component Locations .................................................................................................................. 8
Product and Component Identification
Machine ............................................................................................................................................... 10
Engine ................................................................................................................................................. 11
Axle(s) ................................................................................................................................................. 12
Gearbox ............................................................................................................................................... 13
Operator Protective Structure ............................................................................................................. 14
Safety Labels
General ................................................................................................................................................ 16
Safety Label Identification ................................................................................................................... 16
Operator Station
Component Locations ......................................................................................................................... 18
Interior Switches
Ignition Switch ..................................................................................................................................... 20
Multi-Purpose Switch .......................................................................................................................... 20
Cab Interior Light ................................................................................................................................ 21
Console Switches
General ................................................................................................................................................ 23
Road Lights ......................................................................................................................................... 23
Rear Fog Lights .................................................................................................................................. 23
Hazard Warning Lights ....................................................................................................................... 23
Work Lights ......................................................................................................................................... 23
Boom Work Light ................................................................................................................................ 24
Information .......................................................................................................................................... 24
Find manuals at https://best-manuals.com

Table of Contents
ii 9831/2450-3 ii
Tilt Lock ............................................................................................................................................... 24
Smooth Ride System (SRS) ............................................................................................................... 24
Beacon ................................................................................................................................................ 24
Air-Conditioning ................................................................................................................................... 24
Fan Switch .......................................................................................................................................... 24
Window Heater ................................................................................................................................... 25
Inner Boom Extend/Retract ................................................................................................................ 25
Controls Isolation ................................................................................................................................ 25
Hydraulic Function .............................................................................................................................. 25
Hydraulic Tow Hitch ............................................................................................................................ 25
Reverse Fan ....................................................................................................................................... 26
Rear Window Wiper ............................................................................................................................ 26
Roof Window Wiper ............................................................................................................................ 26
Auxiliary Hydraulic Circuit ................................................................................................................... 26
Constant Flow ..................................................................................................................................... 26
Two Speed Range .............................................................................................................................. 26
Operation
Introduction
General ................................................................................................................................................ 29
Operating Safety
General ................................................................................................................................................ 30
Worksite Safety ................................................................................................................................... 32
Risk Assessment ................................................................................................................................ 33
Walk-Around Inspection
General ................................................................................................................................................ 35
Entering and Leaving the Operator Station
General ................................................................................................................................................ 36
Emergency Exit ................................................................................................................................... 37
Doors
Operator Door ..................................................................................................................................... 38
Windows
Rear Window ...................................................................................................................................... 40
Battery Isolator
General ................................................................................................................................................ 41
Before Starting the Engine
General ................................................................................................................................................ 42
Operator Seat
General ................................................................................................................................................ 43
Suspension Seat ................................................................................................................................. 43
Heated Seat Controls ......................................................................................................................... 44
Seat Belt
General ................................................................................................................................................ 46
Inertia Reel Seat Belt ......................................................................................................................... 46
Static Seat Belt ................................................................................................................................... 47
Mirrors
General ................................................................................................................................................ 49
Starting the Engine
General ................................................................................................................................................ 50
Immobiliser .......................................................................................................................................... 52
Stopping and Parking
General ................................................................................................................................................ 56
Find manuals at https://best-manuals.com

Table of Contents
iii 9831/2450-3 iii
Preparing for Travel
General ................................................................................................................................................ 57
Preparing for Road Travel .................................................................................................................. 57
Preparing for Worksite Travel ............................................................................................................. 59
Smooth Ride System (SRS) ............................................................................................................... 60
Beacon ................................................................................................................................................ 61
Safety Equipment
Control Lock ........................................................................................................................................ 63
Drive Controls
Steering Wheel ................................................................................................................................... 64
Steering Column ................................................................................................................................. 64
Accelerator Pedal ................................................................................................................................ 64
Hand Throttle Control ......................................................................................................................... 64
Travel Speed Selector ........................................................................................................................ 65
Service Brake Pedal ........................................................................................................................... 66
Inching Pedal ...................................................................................................................................... 67
Park Brake .......................................................................................................................................... 67
Transmission Drive Lever ................................................................................................................... 67
Steer Mode Control ............................................................................................................................ 69
Instruments
Instrument Panel ................................................................................................................................. 71
Getting the Machine Moving
General ................................................................................................................................................ 90
Slopes
General ................................................................................................................................................ 92
Driving on Slopes ............................................................................................................................... 92
Working on Slopes ............................................................................................................................. 93
Driving the Machine
Steer Modes ........................................................................................................................................ 95
Limited Slip Differential (LSD) ............................................................................................................ 96
Towing Other Equipment .................................................................................................................... 96
Operating Levers/Pedals
General .............................................................................................................................................. 104
Control Layouts ................................................................................................................................. 104
Boom Controls .................................................................................................................................. 104
Chassis Levelling Controls ............................................................................................................... 105
Auxiliary Circuit Controls ................................................................................................................... 106
Lifting and Loading
General .............................................................................................................................................. 109
Load Charts ...................................................................................................................................... 109
Boom Indicators ................................................................................................................................ 112
Inclinometers ..................................................................................................................................... 112
Longitudinal Load Moment Indicator (LLMI) ..................................................................................... 113
Longitudinal Load Moment Control (LLMC) ..................................................................................... 115
Working with the Boom
General .............................................................................................................................................. 120
Fork Ratings ...................................................................................................................................... 121
Repositioning the Forks .................................................................................................................... 121
Working with Pallets ......................................................................................................................... 122
Working with Bales ........................................................................................................................... 124
Working with Irregular Loads ............................................................................................................ 125
Find manuals at https://best-manuals.com

Table of Contents
iv 9831/2450-3 iv
Stacking Loads ................................................................................................................................. 126
Filling the Shovel .............................................................................................................................. 127
Loading a Truck ................................................................................................................................ 128
Adjusting the Boom .......................................................................................................................... 128
Heating, Ventilating and Air-Conditioning (HVAC)
General .............................................................................................................................................. 130
Air-Conditioning Controls .................................................................................................................. 130
Face Level Fan ................................................................................................................................. 131
Fire Extinguisher
General .............................................................................................................................................. 132
Moving a Disabled Machine
General .............................................................................................................................................. 133
Jump-Starting the Engine ................................................................................................................. 134
Recovery Hitch .................................................................................................................................. 135
Lifting the Machine
General .............................................................................................................................................. 137
Transporting the Machine
General .............................................................................................................................................. 138
Loading the Machine onto the Transporting Vehicle/Trailer ............................................................. 138
Operating Environment
General .............................................................................................................................................. 140
Operating in Low Temperatures ....................................................................................................... 140
Operating in High Temperatures ....................................................................................................... 140
Cab Filters ......................................................................................................................................... 141
Refuelling
General .............................................................................................................................................. 142
Low Fuel Levels ................................................................................................................................ 142
Filling the Tank .................................................................................................................................. 142
Attachments
Working with Attachments
Introduction ........................................................................................................................................ 145
Attachments for your Machine .......................................................................................................... 145
Connecting/Disconnecting Hydraulic Hoses ..................................................................................... 147
Tool Carrier
General .............................................................................................................................................. 151
Quick-fit Carriage
General .............................................................................................................................................. 156
Tow Hitches
General .............................................................................................................................................. 161
Ladder Hitch ...................................................................................................................................... 164
Hydraulic Tow Hitch .......................................................................................................................... 168
Mechanical Tow Hitch ....................................................................................................................... 170
Side-Shift Carriage
General .............................................................................................................................................. 173
Jibs
General .............................................................................................................................................. 178
Extension Jib ..................................................................................................................................... 178
Roof Truss Jib ................................................................................................................................... 179
Hooks
General .............................................................................................................................................. 182
Fork-Mounted Hook .......................................................................................................................... 182
Find manuals at https://best-manuals.com

Table of Contents
v 9831/2450-3 v
Work Platforms
General .............................................................................................................................................. 185
Preservation and Storage
Cleaning
General .............................................................................................................................................. 187
Preparation ........................................................................................................................................ 188
Checking For Damage
General .............................................................................................................................................. 189
Storage
General .............................................................................................................................................. 190
Put into Storage ................................................................................................................................ 190
During Storage .................................................................................................................................. 191
Take out of Storage .......................................................................................................................... 191
Security
General .............................................................................................................................................. 192
JCB Plantguard ................................................................................................................................. 192
Construction Equipment Security and Registration Scheme (CESAR) ............................................ 192
LiveLink ............................................................................................................................................. 192
Maintenance
Introduction
General .............................................................................................................................................. 193
Owner/Operator Support ................................................................................................................... 193
Service/Maintenance Agreements .................................................................................................... 194
Initial Service and Inspection ............................................................................................................ 194
Obtaining Spare Parts ...................................................................................................................... 194
Maintenance Safety
General .............................................................................................................................................. 195
Fluids and Lubricants ....................................................................................................................... 196
Maintenance Schedules
General .............................................................................................................................................. 200
How to Use the Maintenance Schedules ......................................................................................... 200
Maintenance Intervals ....................................................................................................................... 200
Pre-start Cold Checks, Service Points and Fluid Levels .................................................................. 201
Functional Tests and Final Inspection .............................................................................................. 203
Maintenance Positions
General .............................................................................................................................................. 205
Maintenance Position - Boom Lowered ............................................................................................ 205
Maintenance Position - Boom Raised .............................................................................................. 206
Service Points
General .............................................................................................................................................. 209
Access Apertures
General .............................................................................................................................................. 213
Battery Cover .................................................................................................................................... 213
Engine Compartment Cover ............................................................................................................. 214
Rear Cover ........................................................................................................................................ 214
Undershield ....................................................................................................................................... 215
Deck Plate ......................................................................................................................................... 219
Tools
General .............................................................................................................................................. 221
Find manuals at https://best-manuals.com

Table of Contents
vi 9831/2450-3 vi
Lubrication
General .............................................................................................................................................. 222
Preparation ........................................................................................................................................ 222
Attachments
General ............................................................................................................................................. 223
Body and Framework
General ............................................................................................................................................. 224
Pivot Pins .......................................................................................................................................... 224
Boom
General ............................................................................................................................................. 226
Operator Station
General ............................................................................................................................................. 228
Operator Protective Structure ........................................................................................................... 228
Seat ................................................................................................................................................... 229
Seat Belt ........................................................................................................................................... 229
Controls ............................................................................................................................................. 230
Heating, Ventilating and Air-Conditioning (HVAC)
Air-Conditioning ................................................................................................................................ 231
Engine
General ............................................................................................................................................. 232
Oil ...................................................................................................................................................... 233
Drive Belt .......................................................................................................................................... 235
Emissions Control System ............................................................................................................... 236
Air Filter
General ............................................................................................................................................. 239
Outer Element .................................................................................................................................. 239
Dust Valve ........................................................................................................................................ 240
Fuel System
General ............................................................................................................................................. 241
Tank .................................................................................................................................................. 242
Fuel Filter .......................................................................................................................................... 242
Water Separator ............................................................................................................................... 243
Cooling System
General ............................................................................................................................................. 245
Coolant .............................................................................................................................................. 245
Cooling Pack .................................................................................................................................... 246
Brakes
General ............................................................................................................................................. 248
Park Brake ........................................................................................................................................ 249
Service Brake ................................................................................................................................... 251
Gearbox
Oil ...................................................................................................................................................... 252
Axles
Oil ...................................................................................................................................................... 254
Breather ............................................................................................................................................ 254
Hubs
General ............................................................................................................................................. 256
Oil ...................................................................................................................................................... 256
Wheels
General ............................................................................................................................................. 259
Find manuals at https://best-manuals.com

Table of Contents
vii 9831/2450-3 vii
Tyres
General ............................................................................................................................................. 261
Propshafts
General ............................................................................................................................................. 263
Hydraulic System
General ............................................................................................................................................. 264
Services ............................................................................................................................................ 265
Oil ...................................................................................................................................................... 265
Cylinders / Rams .............................................................................................................................. 266
Hose Burst Check Valves ................................................................................................................. 266
Electrical System
General ............................................................................................................................................. 268
Battery ............................................................................................................................................... 269
Battery Isolator ................................................................................................................................. 270
Fuses ................................................................................................................................................ 270
Relays ............................................................................................................................................... 271
Window Washer ................................................................................................................................ 272
Miscellaneous
Fire Extinguisher ............................................................................................................................... 274
Technical Data
Static Dimensions
Dimensions ........................................................................................................................................ 275
Weights ............................................................................................................................................. 276
Visibility Diagrams ............................................................................................................................. 277
Performance Dimensions
General .............................................................................................................................................. 280
Boom Dimensions and Performance ................................................................................................ 281
Towing Weights ................................................................................................................................. 281
Noise Emissions
General .............................................................................................................................................. 283
Noise Data ........................................................................................................................................ 283
Vibration Emissions
General .............................................................................................................................................. 284
Vibration Data ................................................................................................................................... 285
Fluids, Lubricants and Capacities
General .............................................................................................................................................. 287
Fuel ................................................................................................................................................... 288
Diesel Exhaust Fluid (DEF) .............................................................................................................. 291
Coolant .............................................................................................................................................. 293
Torque Values
General .............................................................................................................................................. 294
Electrical System
General .............................................................................................................................................. 295
Fuses ................................................................................................................................................. 295
Relays ............................................................................................................................................... 299
Engine
Exhaust After Treatment (EAT) ......................................................................................................... 301
Wheels and Tyres
General .............................................................................................................................................. 305
Tyre Sizes and Pressures ................................................................................................................ 306
Find manuals at https://best-manuals.com

Table of Contents
viii 9831/2450-3 viii
Declaration of Conformity
General .............................................................................................................................................. 307
Data ................................................................................................................................................... 307
Warranty Information
Service Record Sheet ....................................................................................................................... 309

Table of Contents
ix 9831/2450-3 ix
Acronyms Glossary
ARV Auxiliary Relief Valve
CESAR Construction Equipment Security and Registration
DEF Diesel Exhaust Fluid
ECU Electronic Control Unit
FEAD Front End Accessory Drive
FOPS Falling Object Protective Structure
HVAC Heating Ventilation Air Conditioning
ISO International Organization for Standardization
LCD Liquid Crystal Display
LED Light Emitting Diode
LLMC Longitudinal Load Moment Control
LLMI Longitudinal Load Moment Indicator
LMI Load Moment Indicator
LSD Limited Slip Differential
MRV Main Relief Valve
PIN Product Identification Number
PPE Personal Protective Equipment
RMS Root Mean Square
ROPS Roll-Over Protective Structure
RPM Revolutions Per Minute
SCR Selective Catalytic Reduction
SRS Smooth Ride System
SWL Safe Working Load

Notes:
x 9831/2450-3 x

Introduction
About this Manual
1 9831/2450-3 1
Introduction
About this Manual
Model and Serial Number
This manual provides information for the following model(s) in the JCB machine range:
Model From: To:
1473000 1473999527-58 T4F
2330671 2332671
Using the Manual
This operator's manual is arranged to give you a good understanding of the machine and its safe operation.
It also contains maintenance and technical data.
Read this manual from the front to the back before you use the machine for the first time, even if you have used
machines of a similar/same type before as the technical specification, systems and controls of the machine
may have changed. Particular attention must be given to all the safety aspects of operating and maintaining
the machine.
If there is anything you are not sure about, ask your JCB dealer or employer. Do not guess, you or others could
be killed or seriously injured.
The general and specific warnings in this section are repeated throughout the manual. Read all the safety
statements regularly, so you do not forget them. Remember that the best operators are the safest operators.
The illustrations in this manual are for guidance only. Where the machines are different, the text and or the
illustration will specify.
The manufacturer's policy is one of continuous improvement. The right to change the specification of the
machine without notice is reserved. No responsibility will be accepted for discrepancies which may occur
between specifications of the machine and the descriptions contained in this manual.
All of the optional equipment included in this manual may not be available in all territories
Left-Hand Side, Right-Hand Side
In this manual, 'left' and 'right' mean your left and right when you are seated correctly in the machine.
Figure 1.
A
B
ALeft BRight
Cab/Canopy
This manual frequently makes references to the cab. For example, 'do not operate the machine without an
operator's manual in the cab'. These statements also apply to canopy build machines.

Introduction
About this Manual
2 9831/2450-3 2
Cross References
In this manual, cross references are made by presenting the subject title in blue (electronic copy only). The
number of the page upon which the subject begins is indicated within the brackets. For example: Refer to:
Cross References (Page 2).

Introduction
Safety
3 9831/2450-3 3
Safety
Safety - Yours and Others
All machinery can be hazardous. When a machine is correctly operated and maintained, it is a safe machine
to work with. When it is carelessly operated or poorly maintained it can become a danger to you (the operator)
and others.
In this manual and on the machine you will find warning messages, you must read and understand them. They
inform you of potential hazards and how to avoid them. If you do not fully understand the warning messages,
ask your employer or JCB dealer to explain them.
Safety is not just a matter of responding to the warnings. All the time you are working on or with the machine
you must be thinking of what hazards there might be and how to avoid them.
Do not work with the machine until you are sure that you can control it.
Do not start any work until you are sure that you and those around you will be safe.
If you are not sure of anything, about the machine or the work, ask someone who knows. Do not assume
anything.
Remember:
• Be careful
• Be alert
• Be safe.
Safety Warnings
In this manual there are safety notices. Each notice starts with a signal word. The signal word meanings are
given below.
The signal word 'DANGER' indicates a hazardous situation which, if not avoided, will result in death or serious
injury.
The signal word 'WARNING' indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
The signal word 'CAUTION' indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
The signal word 'Notice' indicates a hazardous situation which, if not avoided, could result in machine damage.
The safety alert system symbol (shown) also helps to identify important safety messages in this manual. When
you see this symbol your safety is involved, carefully read the message that follows.
Figure 2. The safety alert system symbol

Introduction
Safety
4 9831/2450-3 4
General Safety
Training
To operate the machine safely you must know the machine and have the skill to use it. You must abide by
all relevant laws, health and safety regulations that apply to the country you are operating in. The operator's
manual instructs you on the machine, its controls and its safe operation; it is not a training manual. Ensure that
you receive the correct training before operating any machinery. Failing to do so will result in incorrect operation
of the machine and you will be putting yourself and others at risk. In some markets, and for work on certain
jobsites, you may be required to have been trained and assessed in accordance with an operator competence
scheme. Make sure that you and your machine comply with relevant local laws and jobsite requirements – it
is your responsibility.
Care and Alertness
All the time you are working with or on the machine, take care and stay alert. Always be careful. Always be
alert for hazards.
Clothing
You can be injured if you do not wear the correct clothing. Loose clothing can get caught in the machinery.
Keep cuffs fastened. Do not wear a necktie or scarf. Keep long hair restrained. Remove rings, watches and
personal jewellery.
Alcohol and Drugs
It is extremely dangerous to operate machinery when under the influence of alcohol or drugs. Do not consume
alcoholic drinks or take drugs before or while operating the machine or attachments. Be aware of medicines
which can cause drowsiness.
Feeling Unwell
Do not attempt to operate the machine if you are feeling unwell. By doing so you could be a danger to yourself
and those you work with.
Mobile Phones
Switch off your mobile phone before entering an area with a potentially explosive atmosphere. Sparks in such
an area could cause an explosion or fire resulting in death or serious injury.
Switch off and do not use your mobile phone when refuelling the machine.
Lifting Equipment
You can be injured if you use incorrect or faulty lifting equipment. You must identify the weight of the item to
be lifted then choose lifting equipment that is strong enough and suitable for the job. Make sure that lifting
equipment is in good condition and complies with all local regulations.
Raised Equipment
Never walk or work under raised equipment unless it is supported by a mechanical device. Equipment which
is supported only by a hydraulic device can drop and injure you if the hydraulic system fails or if the control
is operated (even with the engine stopped).
Make sure that no-one goes near the machine while you install or remove the mechanical device.
Raised Machine
Never position yourself or any part of your body under a raised machine which is not correctly supported. If the
machine moves unexpectedly you could become trapped and suffer serious injury or be killed.
Lightning
Lightning can kill you. Do not use the machine if there is lightning in your area.
Machine Modifications
This machine is manufactured in compliance with prevailing legislative requirements. It must not be altered in
any way which could affect or invalidate its compliance. For advice consult your JCB dealer.

Introduction
Safety
5 9831/2450-3 5
Clothing and Personal Protective Equipment (PPE)
Do not wear loose clothing or jewellery that can get caught on controls or moving parts. Wear protective clothing
and personal safety equipment issued or called for by the job conditions, local regulations or as specified by
your employer.

Notes:
6 9831/2450-3 6

About the Product
Introduction
7 9831/2450-3 7
About the Product
Introduction
General
Before you start using the machine, you must know how the machine operates. Use this part of the manual
to identify each control lever, switch, gauge, button and pedal. Do not guess, if there is anything you do not
understand, ask your JCB dealer.
Name and Address of the Manufacturer
JCB Excavators Limited, Lakeside Works, Rocester, Uttoxeter, United Kingdom, ST145JP
Product Compliance
Your JCB product was designed to comply with the laws and regulations applicable at the time of its manufacture
for the market in which it was first sold. In many markets, laws and regulations exist that require the owner to
maintain the product at a level of compliance relevant to the product when first produced. Even in the absence
of defined requirements for the product owner, JCB recommend that the product compliance be maintained
to ensure safety of the operator and exposed persons and to ensure the correct environmental performance.
Your product must not be altered in any way which could affect or invalidate any of these requirements. For
advice consult your JCB dealer.
For its compliance as a new product, your JCB and some of its components may bear approval numbers
and marking's, and may have been supplied with a Declaration/Certificate of Conformity. These marking's and
documents are relevant only for the country/region in which the product was first sold to the extent that the
laws and regulations required them.
Re-sales and import/export of products across territories with different laws and regulations can cause new
requirements to become relevant for which the product was not originally designed or specified. In some cases,
pre owned products irrespective of their age are considered new for the purposes of compliance and may be
required to meet the latest requirements which could present an insurmountable barrier to their sale/use.
Despite the presence of any compliance related marking's on the product and components, you should not
assume that compliance in a new market will be possible. In many cases it is the person responsible for import
of a pre owned product into a market that becomes responsible for compliance and who is also considered
the manufacturer.
JCB may be unable to support any product compliance related enquiry for a product which has been moved out
of the legislative country/region where it was first sold, and in particular where a product specification change
or additional certification would have been required in order for the product to be in compliance.
Table of contents
Other jcb Compact Loader manuals
Popular Compact Loader manuals by other brands

Case
Case NHC740665 Service manual

Toro
Toro TXL 2000 Operator's manual

Worldwide Construction And Forestry Division
Worldwide Construction And Forestry Division 444J Technical manual

Thomas
Thomas 35DT Operator and parts manual

Volvo
Volvo SDLG LG918 Operation & maintenance manual

Bush Hog
Bush Hog TOUGH 4045 Specifications