jcb JCB-20LI Planning guide

POWER TOOL
INSTRUCTION & USER MANUAL
EN
JCB-20LI
JCB-30LI
JCB-40LI
JCB-50LI
IM-18BTLI-EN
Original Instructions

2JCB BATTERY PACK
Instruction & User Manual
GENERAL WARNINGS & DISPOSAL
To reduce the risk of injury, the user must read the instruction manual.
The device must not be exposed to rain or immersed in water.
Do not allow any part of the device to come into contact with flames, or to
catch fire.
Do not dispose of batteries in household waste. Return exhausted batteries
to a local collection or recycling point.
This product has been marked with a symbol relating to removing electric and
electronic waste. The product should not be discarded with household waste
but must be returned to a collection system which conforms to the European
Directive 2012/19/EU. It will then be recycled or dismantled in order to
reduce the impact on the environment. Electric and electronic equipment can
be hazardous for the environment and for human health since they contain
hazardous substances.
This symbol is used throughout this manual to warn the user about potential
risks. Please read & understand these sections before using the device.
Do not expose battery pack or tool to fire or excessive temperatures above
130°C.
The month and year of manufacture can be found within the product serial number e.g.
MMYYPPPAXXXXX. Where production month (MM) and production year (YY) are included.

3
JCB BATTERY PACK
Instruction & User Manual
Contents
BATTERY SAFETY 4
COMPONENT LIST 5
BATTERY TECHNICAL DATA 5
OPERATING INSTRUCTIONS 6
Intended Use 6
Battery 6
Maintenance 7
Transport and Storage 7

4JCB BATTERY PACK
Instruction & User Manual
m Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire when
used with another battery pack.
m Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
m When battery pack is not in use, keep
it away from other metal objects, like
paper clips, coins, keys, nails, screws
or other small metal objects, that can
make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
m Under abusive conditions, liquid
may be ejected from the battery;
avoid contact. If contact accidentally
occurs, flush with water. If liquid
contacts eyes, additionally seek
medical help. Liquid ejected from the
battery may cause irritation or burns.
m Do not use a battery pack or
tool that is damaged or modified.
Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire,
explosion or risk of injury.
m Do not expose battery pack or tool
to fire or excessive temperature.
Exposure to fire or temperatures above
130°C may cause explosion.
m Follow all charging instructions and
do not charge the battery pack or
tool outside the temperature range
specified in the instructions. Charging
improperly or at temperatures outside the
specified range may damage the battery and
increase the risk of fire.
m Have your power tool serviced by
a qualified repair person using only
identical replacement parts. This
will ensure the safety of the power tool is
maintained.
m Never service damaged battery
packs. Service of battery packs should
only be performed by the manufacturer or
authorised service providers.
BATTERY SAFETY
Read all safety warnings, instructions
and specifications provided with this
battery. Failure to follow all instructions
listed below may result in electric shock, fire
and/or serious injury. Save all warnings
and instructions for future reference.
WARNING!

5
JCB BATTERY PACK
Instruction & User Manual
COMPONENT LIST
1
LITHIUM ION BATTERY TECHNICAL DATA
2
1. BATTERY PACK - PLEASE REFER TO TABLE
BELOW FOR BATTERY INFORMATION
2. BATTERY TEST BUTTON AND
CHARGE INDICATOR
3. BATTERY RELEASE BUTTON
Battery size shown for illustrative purposes only
3
Battery
Code
Battery
Size Voltage Battery Capacity
Charge Time
(Fast Charger: JCB-18VFC)
Charge Time
(Super Fast Charger: JCB-18SFC)
JCB-20LI Small 18V 2.0Ah 50 mins 30 mins
JCB-30LI Large 18V 3.0Ah 80 mins 45 mins
JCB-40LI Large 18V 4.0Ah 100 mins 60 mins
JCB-50LI Large 18V 5.0Ah 120 mins 75 mins
Times given as a guide only. Battery charge and discharge times dependant on age, usage and condition.

6JCB BATTERY PACK
Instruction & User Manual
OPERATING INSTRUCTIONS
Intended Use
This lithium-ion battery pack is indended for
use only with a compatible JCB 18V power
tool & charger.
The component must not be modified or used
for any other purposes than the ones described
in these instructions.
Battery
Make sure the power switch is not pressed
in when inserting or replacing the battery.
NOTE
m Do not force the battery when
connecting it, use moderate pressure.
An incorrectly connected battery can
damage the battery terminals or the battery
socket on the tool.
m Use the button on the battery to check the
charging status; 4 red LEDs indicates fully
charged, where 1 indicates low battery
status.
Charging The Battery
After charging for the first time, ensure the
battery is completely discharged before
placing on charge again. Repeat this charging
and discharging cycle 4 to 5 times to ensure
battery is correctly conditioned.
WARNING!
m Place the battery charger on a level and
stable surface. Plug the charger into a 230 V
power point.
m Connect the battery to the charger so that it
clicks into place.
m Refer to the Battery Charge Level table
below for battery charger status as indicated
by LED lights.
m Unplug the charger from the power point
and remove the battery from the charger.
Battery Charge Level
Red
LED
Green
LED Battery Charge Status
Charger is connected to
mains power
Connected battery is
charging
Connected battery is fully
charged
Connected battery has a
charging fault
Charger is outside correct
operating temperature
range (<0˚C / >40˚C)
If the LEDs on the charger do not come on
when charging:
m Check that the charger’s mains adaptor is
properly plugged into the power point and
that the charger is switched on
m Check that the battery is correctly inserted
in the charger
Connecting the battery
m Connect the battery to the battery socket
on the tool so that it clicks into place.
Removing the battery
m Press the battery release button and remove
the battery from the tool.

7
JCB BATTERY PACK
Instruction & User Manual
Maintenance
Remove the battery pack from the tool or
charger before cleaning and maintenance.
This helps avoid the risk of electric shocks
and accidental injury.
WARNING!
m Wipe the battery pack with a dry or damp
cloth. Do not use a wet cloth. Do not
use detergent that contains solvent
or corrosive, abrasive additives. This
risks damaging the surfaces of the battery
pack.
m Clear the battery connection terminals and
the release button of dust and dirt after
each use. Do not clean terminals by
inserting sharp objects in them, such
as screwdrivers and other similar
objects.
m Stubborn contamination in areas hard to
access can be removed with compressed air
(max 3. bar).
m Regularly check all fasteners, screws and
bolts to make sure that they are tight.
Tighten any loose screws immediately or
serious injury could occur.
Never open the battery pack. The battery
pack has no internal parts that the user can
service or repair. Never try to repair the
battery pack yourself. Take to an authorised
service centre.
WARNING!
Transport and Storage
m If the battery pack will remain unused for
any length of time, it should be stored in the
original packaging, or in a compatible JCB
power tool storage insert.
m Store the battery pack in a dry, frost-free,
well ventilated place with a temperature of
no more than 40°C.
m Keep all battery packs out of the reach of
children.
m Always remove the battery from any tools
before transport.
m Ensure that the battery pack is not at risk of
being exposed to excessive vibration and
shocks during transport, especially if the
battery pack will be transported by car or
other vehicle.