Jenn-Air JED3430WS Parts list manual

30" (76.2 CM) AND 36" (91.4 CM) ELECTRIC
DOWNDRAFT COOKTOP
PRODUCT MODEL NUMBERS CUTOUT DIMENSIONS
JED3430W
JED3536W
JED4430W
JED4536W
36" (91.4 cm) Cooktop - for standard and electric models
A. Model/serial rating plate location
B. 20
⁹⁄₁₆ " (52.3 cm)
C. 22" (55.9 cm)
A. 35
¹¹⁄₃₂ " (89.8 cm)
B. 12
⁷⁄₈ " (32.8 cm) centerline of
product to edge of burner box
C. 12
⁷⁄₈ " (32.8 cm)
D. 34
¹⁄₈
" (86.7 cm)
E. 12
¹⁄₂ " (31.8 cm)
F. 8
¹⁷⁄₆₄ " (20.9 cm)
recommended minimum
cabinet to motor clearance
G. 18" (45.7 cm)
H. 4
⁵⁄₈ " (11.8 cm)
B
C
A
A
B
C
ED
F
G
H
PRODUCT DIMENSIONS
ELECTRICAL CONNECTION OPTIONS
A 4-wire or 3-wire, single phase, 120/240 volt, 60 Hz., AC only
electrical supply on a separate, 40-amp circuit breaker is required for
both 30" (76.2 cm) and 36" (91.4 cm) models. If a fused system is
used, fuse both sides of the line.
30" (76.2 cm) Cooktop - for standard and electric models
A. Model/serial rating plate location
B. 20
⁹⁄₁₆
" (52.3 cm)
C. 22" (55.9 cm)
A. 29
³⁄₄
" (75.6 cm)
B. 12
¹⁄₂
" (31.8 cm)
centerline of product to
edge of burner box
C. 12
¹⁄₂
" (31.8 cm)
D. 28
³⁄₈
" (72.1 cm)
E. 12
¹⁄₂
" (31.8 cm)
F. 2" (5.1 cm) recommended minimum
cabinet to motor clearance
G. 18" (45.7 cm)
H. 4
⁵⁄₈
" (11.8 cm)
A
BC
AB
C
D
F
E
G
H
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice. Ref. W10436037A
12-13-11
Page 1 of 2

CABINET DIMENSIONS
D
A
E
I
J
K
G
H
L
C
F
B
Cabinet opening dimensions shown are for 25" (64 cm) countertop depth, 24"
(61 cm) base cabinet depth and 36" (91.4 cm) countertop height. If installing a
range hood or microwave hood combination above the range, follow the range hood
or microwave hood combination installation instructions for dimensional clearances
above the cooktop surface. A freestanding range may be installed next to
combustible walls with zero clearance.
A. 30" (76.2 cm) on 30" (76.2 cm) models
36" (91.4 cm) on 36" (91.4 cm) models
B. Combustible area above countertop (shown by dashed box above)
C. 30" (76.2 cm) minimum clearance between top of cooktop platform
and bottom of uncovered wood or metal cabinet (24" [61 cm]
minimum clearance if bottom of wood or metal cabinet is covered
by not less than ¹⁄₄" [0.6 cm] flame retardant millboard covered with
not less than No. 28 MSG sheet steel, 0.015" [0.04 cm] stainless
steel, or 0.024" [0.06 cm] aluminum or 0.020" [0.05 cm] copper)
D. 13" (33 cm) recommended upper cabinet depth
E. 2" (5.1 cm)
F. 21¹⁄₈" (73.4 cm)
G. 18" (45.7 cm) minimum clearance from upper cabinet to countertop
within minimum horizontal clearances to cooktop
H. Junction box or outlet; 12" (30.5 cm) minimum from bottom of
countertop
I. Junction box or outlet; 10" (25.4 cm) from right-hand side of
cabinet
J. 28⁷⁄₈" (73.4 cm) on 30" (76.2 cm) models
34¹⁄₂" (87.6 cm) on 36" (91.4 cm) models
K. 2¹⁄₂" (6.4 cm) minimum distance to nearest left and right side
combustible surface above cooktop
L. 1¹⁄₂" (3.8 cm) minimum clearance between back wall and
countertop
NOTE: After making the countertop cutout, some installations may require
notching down the base cabinet side walls to clear the cooktop base. To avoid this
modification, use a base cabinet with sidewalls wider than the cutout.
● A minimum side clearance of 6" (15.2 cm) is recommended
between side of cooktop and side wall for maximum
ventilation performance.
● A minimum clearance of 2" (5.1 cm) is recommended between the motor/blower
and cabinet for proper cooling. A 6" (15.2 cm) clearance is recommended for
servicing access.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice. Dimensions are for planning purposes only. For complete details, see Installation Instructions packed with product. Specifications subject to change without notice. Ref. W10436037A
12-13-11
Page 2 of 2