Jensen JWM22 User manual

P.SCAN
HDMI
Basic Operation
AM/FM: Press to cycle through radio
source mode.
R
BT/USB: Press to cycle through
BLUETOOTH and USB source mode.
HDMI/AUX: Press to cycle through
HDMI IN and REAR AUX source mode.
VOLUME: Press the VOLUME UP
button to increase volume.
Press the VOLUME DOWN button
to decrease volume.
POWER/DIM: Press to turn ON.
Press again to switch the DIMMER
(On/Off).
Hold to turn OFF and enter standby
mode.
BACK: Press to exit any menu.
HDMI IN: Connect HDMI cable from
device.
RESET: Use a ball point pen or thin
metal object to press the reset.
AUDIO: Hold to bring up AUDIO
ADJUSTMENT options: BASS, TREBLE,
BALANCE (left to right), FADE (front to
rear), & Loudness (ON/OFF).
SPEAKER ZONE A: Press to select
speaker zone output.
SETTINGS: Hold to bring up SETTING
MENU options: BLUETOOTH Device
List, BLUETOOTH PAIR, BLUETOOTH
(ON/OFF), DIMMING (ON/OFF),
DIMMING LEVEL, PRESET VOLUME,
TIME (12/24) and RESET.
Press and buttons to select each
SETTING option except for 'RESET'.
SPEAKER ZONE B: Press to select
speaker zone output.
P.SCAN
HDMI
AM/FM: Press to change source to
radio mode.
P.SCAN: Hold to access Tuner option
menu, press again to cycle through
AUTO STORE & PRESET SCAN and
Press to select.
AUTO STORE: Store strongest
broadcast station in your area.
PRESET SCAN: Scan through
currently stored presets.
VOLUME: Press the VOLUME UP
button to increase volume. Press the
VOLUME DOWN button to
decrease volume.
TUNER/SEEK/TRACK: Press
button to tune frequency higher.
Press button to tune frequency
lower. Press and hold to scan to next
strongest station.
STATION STORE PRESETS: Hold to
store current station.
Press once to recall stored channel.
NOTE: Up to 18 FM & 12 AM channels
can be stored.
P.SCAN
HDMI
MODE: Press to cycle source to
USB mode.
VOLUME: Press the VOLUME UP
button to increase volume.
Press the VOLUME DOWN
button to decrease volume.
RANDOM: Press to play all tracks
in random order. Press again for
normal playback.
PLAY/PAUSE: Press to PAUSE or
RESUME current audio.
REPEAT: Press consecutively to
cycle through (Track, Folder, all)
playback of tracks.
TUNER/SEEK/TRACK: Press
button to advance to NEXT TRACK.
Press button to advance to
PREVIOUS TRACK. Press & Hold to
fast forward/reverse seek through the
track.
FOLDER DOWN: Press to go to
previous folder.
FOLDER UP: Press to go to next folder.
USB: Connect a USB flash/thumb drive
for audio playback.
JWM22
QUICK REFERENCE GUIDE

A B
P.SCAN
HDMI
Bluetooth Operation
MODE: Press cycle source to BT
mode.
PAIR DEVICE VIA BLUETOOTH:
Make sure the device you intend to
pair with is on and Bluetooth is
enabled.
Press & hold to start the pairing
process. The display will show 'PAIR'
and be able to be paired with for 120
seconds. With your device in Bluetooth
settings, 'JWM22' should appear as an
available device. Tap 'JWM22' to
connect.
VOLUME: Press the VOLUME UP
button to increase volume. Press
the VOLUME DOWN button to
decrease volume.
SETTINGS: Press & hold to navigate
through menu options, Press to
select BT Device LIST or PAIR.
TUNER/SEEK/TRACK: Advance or
reverse tracks on your device.
PLAY/PAUSE: Press to PAUSE or
RESUME current audio.
ANSWERING PHONE: BT audio will
automatically pause when a call is
answered. It will then resume once call
has ended. In some cases, it may be
necessary to press the play button to
resume the BT audio.
P.SCAN
HDMI
Clock With Alarm
TIME VIEW: Press to toggle clock
display or song information.
ALARM/SLEEP TIMER/TIME SET:
Hold to bring up time menu and press
again to cycle through the menu
options: ALARM (ON/OFF), ALARM
SET, SLEEP TIMER (OFF, 0, 15, 30,
45, 60 MINUTES), CLOCK SET.
Press button to adjust hour, press
button to adjust minutes either
clock or alarm time.
BACK: Press to exit time menu.
TIME (12H/24H): Hold to bring up
SETTING MENU and press repeatedly
to cycle through setting menus until
TIME (12/24) set reached.
Press and buttons to select 12
hours clock or 24 hours clock.
For owner’s manual, please visit http://www.asaelectronics.com/manuals-guides.
©Copyright 2019 ASA,LLC QRG-JWM22