Jensen CAR710W User manual

QUICK START GUIDE
This Quick Start Guide gives you the basics to
start using your CAR710W. Please visit
https://www.jensenmobile.com/user-manuals.html
to download a complete owner’s manual or call customer
service at 1-888-921-4088 (Monday-Friday, 9AM-5PM EST).
CAR710W
Multimedia Receiver with Wireless and Wired CarPlay™and Android Auto™
featuring a 7" digital TFT Display
Designed and Engineered in USA

Wiring Diagram - Inputs/Outputs
Note:
When replacing a fuse, make sure to use the correct type and amperage. Using an incorrect fuse
could cause damage. The unit uses (1) 15 amp ATC mini style fuse located on the power connector.
Wiring Notes:
Subwoofer output
The Subwoofer preamp audio output (Blue jacket with Black RCA) is active in all audio modes.
Rear camera input
A rear view camera (not included) can be used with the Camera input.
SiriusXM
For more information on how to install the SiriusXM Connect Vehicle tuner, consult the installation guide included
with the tuner(SiriusXM connect tuner and subscription sold separely).
Note: Works for CarPlay and Android Auto only.

Before You Start
• Disconnect negative battery terminal. Consult a qualified technician for instructions.
• Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight,
or where it would be subject to dust, dirt or excessive vibration.
Installation
02817,1*6&5(:6
.YNN .YNN
75,05,1*

Main Menu
In main menu, press the desired icon to enter the corresponding mode: Radio/USB/SXM/BT Phone/
Android Auto/CarPlay/AV In/BT Audio/Equalizer/Settings.
Control Locations
SOURCE
VOICE ACTIVATION BUTTON
The radio display features the following functions and displays:
21 3 4 5 6
RESET
VOL-
VOL+
Power/Mute
1
2
3
4
5
6

Tuner Operation
Main Menu
Current Mode Indicator
Preset Stations
Local/Distance
AS/PS
Keypad
EQ
Seek Tune Up
Seek Tune Down
AM
FM
1
2
3
4
5
6
7
8
9
10
11
1 2 3
8
11 10 9
4
5
6
7
Audio Operation
Press the Settings icon on the main menu screen to adjust Fader and Balance controls, Equalizer
(8-Band Tone Control and 8 Presets EQ Settings).

USB Operation
From the main menu, touch the USB icon on the main screen.
Note: Video playback is enabled only when the vehicle is in park and the parking brake engaged.
Main Menu
Current Mode Indicator
List
Repeat
Random
Search
EQ
Track Up
Play/Pause
Track Down
1
2
3
4
5
6
7
8
9
10
12
3
4
5
6
7
10 9 8

SiriusXM®Satellite Radio Operation
From the main menu, touch the SXM icon on the main screen.
Main Menu
Band
Current Mode Indicator
Program Information
Search
Preset Channel List
Additional Options
Preset Buttons
Direct
Channel Down
Channel Up
Tune / Track Down
Play / Pause
Tune / Track Up
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1 3 4
2 6 75
9 10 11 12 13 14
8

General Operation
From the Main Menu screen, select Setup to access the Settings menu and select from nine categories
represented by the icons on the top of the screen: General, Audio, Display, Others. Select the category,
and adjust any of the available options using the touch screen.
Sync GPS Time : Synchronizes the clock time with the GPS.
Manual: Turn off GPS synchronizes and you can set the time manually.
Time Zone
: Select the time zone.

Wired & Wireless CarPlay Operation
Wired connection
1. Connect an Apple CarPlay compatible device to this unit via USB.
2. Press the Apple CarPlay icon.
The Apple CarPlay home screen appears.
Wireless connection
Before using Apple CarPlay wirelessly, turn on the Bluetooth/Wifi
function on the Phone.
1. Press icon on the main menu;
2. Press " ” to confirm to use wireless CarPlay;
3. Press " ”icon to search phone device. The available devices appear on the list;
4.
Find the desired device on the screen and press "Pair" ;
5. A pass key will be displayed on the screen
;
6. The same key appears on the iPhone, press "Pair" and then press "Allow" for the popups ;
7. Press " ” on the screen to confirm to connect ;
8. Press "Use CarPlay" on the iPhone. The unit configures the connection then starts the application.
Tip: Press " ” icon. Displays CarPlay device list. This icon appears Only When CarPlay is connected and
two or more devices can be used as CarPlay Source.

Wired & Wireless Android Auto™ Operation
Wired connection
1. Connect an Android Auto™ compatible device to this unit via USB.
2. Press the Android Auto icon.
The Android Auto home screen appears.
Wireless connection
Before using Android Auto wirelessly, turn on the Bluetooth/Wifi
function on the Android device.
1. Press icon on the main menu;
2. Press " ” to confirm to use wireless Android Auto;
3. Press " ”icon to search phone device. The available devices appear on the list;
4.
Find the desired device on the screen and press "Pair";
5. A pass key will be displayed on the screen;
6. The same key appears on the Android device, press "Pair" and then press "Allow" for the popups
;
7. Press " ” on the screen to confirm to connect ;
The unit configures the connection then starts the application.
Tip: Press " ” icon. Displays Android Auto device list. This icon appears Only When Android Auto is
connected and two or more devices can be used as Android Auto Source.