4
1.Declarationofconformity
Onourownresponsibilityweherebydeclarethatthis
productcomplieswiththeregulationslistedonpage
2.Designedinconsiderationwiththestandards.
2.Warranty
TOOL France SARL guarantees that the supplied
product(s) is/are free from material defects and
manufacturingfaults.
Thiswarrantydoesnotcoveranydefectswhichare
caused,eitherdirectlyorindirectly,byincorrectuse,
carelessness, damage due to accidents, repairs or
inadequate maintenance or cleaning as well as
normalwearandtear.
Furtherdetailsonwarranty(e.g.warrantyperiod)can
befoundintheGeneralTermsandConditions(GTC)
thatareanintegralpartofthecontract.
TheseGTCmaybeviewedonthewebsiteofyour
dealerorsenttoyouuponrequest.
TOOLFranceSARLreservestherighttomakechanges
totheproductandaccessoriesatanytime.
3.Safety
3.1Authorizeduse
Thisdrumsanderisdesignedforsandingwoodand
similar materials only. Sanding of other materials is
not permitted and may be carried out in specific
casesonlyafterconsultingwiththemanufacturer.
Themachineisnotsuitableforwetsanding.
The proper use also includes compliance with the
operatingandmaintenance instructions giveninthis
manual.
The machine must be operated only by persons
familiarwithitsoperationandmaintenanceandwho
arefamiliarwithitshazards.
Therequiredminimumagemustbeobserved.
The machine must only be used in a technically
perfectcondition.
Whenworkingonthemachine,allsafetymechanisms
andcoversmustbemounted.
In addition to the safety requirements contained in
these operating instructions and your country’s
applicable regulations, you should observe the
generally recognized technical rules concerning the
operationofwoodworkingmachines.
Any other use exceeds authorization.
Intheeventofunauthorizeduseofthemachine,the
manufacturer renounces all liability and the
responsibility is transferred exclusively to the
operator.
3.2Generalsafetynotes
Woodworking machines can be dangerous if not used
properly. Therefore the appropriate general technical
rulesaswellasthefollowingnotesmustbeobserved.
Read and understand the entire instruction manual
beforeattemptingassemblyoroperation.
Keep this operating instruction close by the machine,
protectedfromdirtandhumidity,andpassitovertothe
newownerifyoupartwiththetool.
Nochangestothemachinemaybemade.
Daily inspect the function and existence of the safety
appliances before you start the machine.
Donotattemptoperationinthiscase,protectthe
machinebyunpluggingthepowercord.
Before operating the machine, remove tie, rings,
watches,otherjewellery, and rollupsleevesabovethe
elbows.Removealllooseclothingandconfinelonghair.
Wearsafetyshoes;neverwearleisureshoesorsandals.
Alwaysweartheapprovedworkingoutfit:
‐ eyeprotection
‐ expiratoryprotection
‐ dustprotection
Donotwearlooseclothesandgloveswhileoperating
thismachine.
Install the machine so that there is sufficient space for
safeoperationandworkpiecehandling.
Keepworkareawelllighted.
Themachineisdesignedtooperateinclosedroomsand
mustbeboltedstableonfirmandlevelledtablesurface
oronthesuppliedcabinetstand.
Make sure that the power cord does not impede work
and cause people to trip. Keep the floor around the
machinecleanandfreeofscrapmaterial,oilandgrease.
Stayalert!Giveyourworkundividedattention.
Usecommonsense.Do not operatethemachinewhen
youaretired.
