jettools.com
SANDSMART™
SandSmart™
The SandSmart control continuously monitors the load
on the drum motor, and automatically regulates the
speed of the conveyor motor to maintain the highest
feed rate without overload. If the load on the drum
motor increases, the SandSmart control will decrease
the conveyor feed rate and will stop the conveyor under
extreme conditions. If the load on the drum decreases,
SandSmart will increase it faster than the manual set-
ting on the speed adjustment label. Red indicator light
goes on when SandSmart control
has detected too great a depth of
cut and/or too fast a speed rate. SMART
Sand
™
STOCK NUMBER 629004K 649003K 649004K 649005K 638003 638003DXK
Model Number 16-32 Plus 22-44 Plus 22-44 Plus 22-44 Plus 22-44 Pro 22-44 Pro Deluxe
Style Open Stand Benchtop Open Stand Closed Stand Open Stand Open Stand
Max. Sanding Width (in.) 32 (Two Passes) 44 (2 passes) 44 (2 passes) 44 (2 passes) 44 (2 passes) 44 (2 passes)
Min. Sanding Length (in.) 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 2-1/4
Max. Sanding Thickness (in.) 344444
Min. Sanding Thickness (in.) 1/32 1/32 1/32 1/32 1/32 1/32
Drum Dimensions (diam. x L/in.) 5 x 16 5 x 22 5 x 22 5 x 22 5 x 22 5 x 22
Drum Speed (RPM) 1720 1700 1700 1700 1600 1600
Dust Port Diameter (in.) 444444
Conveyor Motor 43 in.-lbs. Torque,
Direct Drive, DC
43 in.-lbs. Torque,
Direct Drive, DC
43 in.-lbs. Torque,
Direct Drive, DC
43 in.-lbs. Torque,
Direct Drive, DC
43 in.-lbs. Torque,
Direct Drive, DC
43 in.-lbs. Torque,
Direct Drive, DC
Conveyor Variable
Feed Rate (FPM) 0 to 10 0 to 10 0 to 10 0 to 10 0 to 10 0 to 10
Motor (TEFC) 1-1/2HP, 1Ph, 115V 1-3/4HP, 1Ph, 115V 1-3/4HP, 1Ph, 115V 1-3/4HP, 1Ph, 115V 1-3/4HP, 1Ph, 115V 1-3/4HP, 1Ph, 115V
Net Weight (lbs.) 164 254 296 345 379 402
SMART
Sand
™
SandSmart
indicator
light
