Jetson Hex Kick Scooter User manual

Hex Big Wheel Kick Scooter.
A guide for your ride.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
MODEL: JHEXBLU  JHEXPNK  JHEXRED  JHEXGRN
Designed in Brooklyn | Made in China

Remember to be safe and,
most importantly, have fun!

3
Table of Contents
Safety Warnings
What’s in the Box
Specs & Features
Unfolding / Folding the Hex
Assembly
Adjusting the Handlebar
Using the Brake
Helmet Safety
Riding the Hex
Care & Maintenance
...............................................................................................................4
..............................................................................................................6
.............................................................................................................9
.................................................................................................10
......................................................................................................................13
....................................................................................................14
..............................................................................................................16
................................................................................................................17
................................................................................................................18
.........................................................................................................19

4
Safety Warnings
• Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety
instructions. The user will be responsible for any loss or damage caused by improper use.
• Before each cycle of operation, the operator shall perform the preoperation checks speciied by the manufacturer: That
all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition; That the
braking system is functioning properly; That any and all axle guards, chain guards, or other covers or guards supplied by the
manufacturer are in place and in serviceable condition; That tires are in good condition, inlated properly, and have suicient
tread remaining; The area that the product is to be operated should be safe and suitable for safe operation.
• Components shall be maintained and repaired in accordance with the manufacturer’s speciications and using only the
manufacturer’s authorized replacement parts with installation performed by dealers or other skilled persons.
• Warning against recharging non-rechargeable batteries.
• Don’t allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or drive
train, while the motor is running.
• This product should not be used by children or persons with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction (IEC 60335-1/A2:2006).
• Unsupervised children should not play with the product (IEC 60335-1/A2:2006).
• Adult supervision is required.
• The rider should not exceed 220 lb.
• Units shall not be operated to perform racing, stunt riding, or other maneuvers, which may cause loss of control, or may cause
uncontrolled operator/passenger actions or reactions.
• Never use near motor vehicles.
• Avoid sharp bumps, drainage grates, and sudden surface changes. Scooter may suddenly stop.
• Avoid streets and surfaces with water, sand, gravel, dirt, leaves, and other debris. Wet weather impairs traction, braking, and visibility.
• Avoid riding around lammable gas, steam, liquid, or dust that could cause ire.
• Operators shall adhere to all of the manufacturer’s recommendations and instructions, as well as comply with all laws and
ordinances: Units without headlights shall be operated only with adequate daylight conditions of visibility, and; Owners shall be
encouraged to highlight (for conspicuity) using lighting, relectors, and for low-riding units, signal lags on lexible poles.
• Persons with the following conditions shall be cautioned not to operate: Those with heart conditions; Pregnant women;
Persons with head, back, or neck ailments, or prior surgeries to those areas of the body; and persons with any mental or physical
conditions that may make them susceptible to injury or impair their physical dexterity or mental capabilities to recognize,
understand, and perform all of the safety instructions and to be able to assume the hazards inherent in unit use.
• Do not ride at night.
• Do not ride after drinking or taking prescription medication.
• Do not carry items when riding.
• Never operate the product barefooted.
• Always wear shoes and keep shoelaces tied.
• Make sure your feet are always placed securely on the deck.

5
• Operators always shall use appropriate protective clothing, including but not limited to a helmet, with appropriate certiication,
and any other equipment recommended by the manufacturer: Always wear protective equipment such as helmet, knee pads,
and elbow pads.
• Always give way to pedestrians.
• Be alert to things in front and far away from you.
• Do not allow distractions when riding, such as answering the phone or engaging in any other activities.
• The product cannot be ridden by more than one person.
• When you ride the product along with other riders, always keep a safe distance to avoid a collision.
• When turning, be sure to maintain your balance.
• Riding with improperly adjusted brakes is dangerous and can result in serious injury or death.
• The brake may become hot while operating, do not touch the brake with your bare skin.
• Applying brakes too hard or too suddenly can lock up a wheel, which could cause you to lose control and fall. Sudden or
excessive application of the brake may result in injury or death.
• If the brake loosens, please adjust with the hexagon wrench, or please contact Jetson Customer Care.
• Replace worn or broken parts immediately.
• Check whether all safety labels are in place and understood before riding.
• The owner shall allow the use and operation of the unit after a demonstration that such operators can understand and operate
all components of the unit before use.
• Do not ride without proper training. Do not ride at high speeds, on uneven terrain, or on slopes. Do not perform stunts or
turn abruptly.
• Recommended for indoor use.
• Prolonged exposure to UV rays, rain and the elements may damage the enclosure materials, store indoors when not in use.
California Proposition 65
WARNING:
This product can expose you to a chemical such as Chromium that is known to the state of California to cause cancer or birth
defects or other reproductive harm. For more information go to www.p65warnings.ca.gov/product
MODIFICATIONS
Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from Jetson
Customer Care. This will void any warranty, and can lead to malfunctions which may cause injury.
ADDITIONAL OPERATION CAUTIONS
Do not lift the product o the ground while it is on and the wheels are in motion. This can result in freely spinning wheels, which
may cause injury to yourself or others nearby. Do not jump on or o the product, and do not jump while using it. Always keep
your feet firmly planted on the foot rest while in operation. Always check the battery charge before using.

6
What’s in the Box
*ADULTS MUST ASSIST CHILDREN IN THE INITIAL ADJUSTMENT PROCEDURES OF THE PRODUCT.
1. HANDLEBAR
2. STEM CLAMP
3. FRONT WHEEL
4. FOLDING LEVER
5. KNOB & LOCKING LEVER ON OPPOSITE SIDE
6. KICKSTAND
7. DECK
8. REAR FOOT BRAKE
9. REAR WHEEL
TOOLS INCLUDED:
ALLEN KEY

7
1
3 9
4
7
6
8
5
2
PLEASE NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.

9
Specs & Features
• WEIGHT LIMIT: 220 LB
• PRODUCT WEIGHT: 9.8 LB
• WHEEL SIZE: 8”
• FOLDED DIMS: 31.7" X 15.6" X 12.4"
• UNFOLDED DIMS: 35.6" X 15.6" X 35.6"
• DECK DIMS: 23.2” X 6”
• STEM HEIGHT: 35.6” 39.2”
• 3AA BATTERIES REQUIRED NOT INCLUDED
• RECOMMENDED AGE: 8+

10
1.1 Unfolding / Folding the Hex
LOOSEN KNOB
1. Get Started

11
OPEN THE LOCKING LEVER
LOCATED ON THE RIGHT
SIDE OF THE HEX

12
LIFT UP THE FOLDING LEVER
• RAISE STEM UP. ONCE YOU HEAR IT CLICK, IT’S FULLY UNFOLDED.
• TIGHTEN THE KNOB AND CLOSE THE LOCKING LEVER.
• REVERSE THESE STEPS TO FOLD THE HEX.

13
1.2 Assembly
•ALIGN THE TOP OF THE HANDLEBAR CLAMP AND THE HANDLEBAR WITH THE PREDRILLED HOLES IN THE
BOTTOM OF THE HANDLEBAR CLAMP.
•PLACE BOLTS THROUGH THE TOP OF THE HANDLEBAR CLAMP, HANDLEBAR, AND THE BOTTOM OF THE
HANDLEBAR CLAMP.
•TIGHTEN BOLTS. CHECK THAT THE HANDLEBAR IS SECURE.
NOTE: ALWAYS ENSURE THE BOLTS ARE TIGHT PRIOR TO RIDING.
BOLT

14
1.3 Adjusting the Handlebar
• OPEN THE STEM CLAMP.
• WHILE PRESSING DOWN THE BUTTON,
LIFT OR LOWER THE HANDLEBAR.
STEM CLAMP
BUTTON

15
• WHEN YOU HEAR IT CLICK, TIGHTEN &
CLOSE STEM CLAMP TO LOCK. MAKE SURE
THE HANDLEBAR IS SECURE.
CAUTION: THE STEM PIN WILL NOT KEEP
THE STEM SECURE, PLEASE MAKE SURE
THE STEM CLAMP IS TIGHTENED AND
CLOSED PRIOR TO RIDING.

16
1.4 Using the Brake
PRESS DOWN TO COME TO A COMPLETE STOP

17
1.5 Helmet Safety
THE FOREHEAD IS EXPOSED.
COULD CAUSE SERIOUS INJURY.
THE FOREHEAD IS COVERED
BY THE HELMET.

18
2.1 Riding the Hex
2. Make Moves
•PLACE ONE FOOT IN FRONT.
•PLACE THE OTHER FOOT IN
BACK AT 70  90°ANGLE.
•TURN THE HANDLEBAR TO THE
LEFT OR RIGHT TO MAKE TURNS.
NOTE: ALWAYS BE SURE TO FOLD
AWAY THE KICKSTAND WHEN IT
IS NOT IN USE.