JETWAY J-630AF User manual

630AF
USER'S MANUAL
M/B For Socket 370 Pentium

IIIProcessor
NO G03-630AFR2A
Release date: FEB 2001
** Year 2000 compliant **
Trademark:
* Pentium is registered trademark and MMX is a trademark o Intel Corporation,
the other names and brands are the property o their respective owners
* Speci ications and In ormation contained in this documentation are urnished or in ormation use only, and are
subject to change at any time without notice, and should not be construed as a commitment by manu acturer.

USER’S NOTICE.............................................................................1
MANUAL REVISION INFORMATION............................................2
THERMAL SOLUTIONS.....................................................................................2
CHAPTER 1 INTRODUCTION OF 630AF MOTHERBOARD
1-1 FEATURE OF MOTHERBOARD...............................................................3
1-2 SPECIFICATION...........................................................................................4
1-3 PERFORMANCE LIST.................................................................................5
1-4 LAYOUT DIAGRAM & JUMPER SETTING............................................6
CHAPTER 2 HARDWARE INSTALLATION
2-1 HARDWARE INSTALLATION STEPS......................................................8
2-2 CHECKING MOTHERBOARD'S JUMPER SETTING...........................8
2-3 INSTALL CPU................................................................................................9
2-3-1 ABOUT PENTIUMIII & CELERON™ 370-PIN CPU..........................9
2-3-2 SETTING CPU BUS CLOCK & MEMORY CLOCK JUMPER.............10
2-3-3 INSTALL CPU..............................................................................................10
2-3-4 OVERCLOCK RUNNING..........................................................................11
2-3-5 GLOSSARY..................................................................................................12
2-4 INSTALL MEMORY.....................................................................................13
2-5 EXPANSION CARD.......................................................................................14
2-5-1 PROCEDURE FOR EXPANSION CARD INSTALLATION..................14
2-5-2 ASSIGNING IRQ FOR EXPANSION CARD............................................15
2-5-3 INTERRUPT REQUEST TABLE FOR THIS MOTHERBOARD.........15
2-6 CONNECTORS, HEADERS.........................................................................16
2-6-1 CONNECTORS............................................................................................16
2-6-2 HEADERS.....................................................................................................19
2-7 STARTING UP YOUR COMPUTER..........................................................22
CHAPTER 3 INTRODUCING BIOS
3-1 ENTERING SETUP.......................................................................................23
3-2 GETTING HELP............................................................................................24
3-3 THE MAIN MENU.........................................................................................24
3-4 STANDARD CMOS FEATURES.................................................................25
3-5 ADVANCED BIOS FEATURES...................................................................27
3-6 ADVANCED CHIPSET FEATURES...........................................................29
3-6-1 ADVANCED DRAM CONTROL...............................................................30
3-7 INTEGRATED PERIPHERALS..................................................................31
3-7-1 ONCHIP IDE FUNCTION..........................................................................32
3-7-2 ONCHIP DEVICE FUNCTION..................................................................33
i
TABLE OF CONTENT

3-7-3 WINBOND SUPERIO DEVICE..................................................................33
3-8 POWER MANAGEMENT SETUP..............................................................34
3-8-1 PM WAKE UP EVENTS..............................................................................36
3-9 PNP/PCI CONFIGURATION SETUP.........................................................37
3-9-1 IRQ RESOURCES........................................................................................38
3-10 PC HEALTH STATUS.................................................................................38
3-11 FREQUENCY/VOLTAGE CONTROL .....................................................39
3-12 LOAD STANDARD/OPTIMIZED DEFAULTS........................................40
3-13 SET SUPERVISOR/USER PASSWORD....................................................40
CHAPTER 4 DRIVER & FREE PROGRAM INSTALLATION
MAGIC INSTALL SUPPORTS WINDOWS 95/98/98SE/NT4.0/2000..............41
4-1 AGPVXD INSTALL SIS 630 AGPVXD DRIVER.....................................42
4-2 VGA INSTALL SIS 630 VGA DRIVER............................................43
4-3 SOUND INSTALL SIS 018 AC'9 AUDIO DRIVER AND
APPLICATION SOFTWARE....................................................44
4-4 PC-HEALTH WINBOND HARDWARE DOCTOR MONITORING
SOFTWARE............................................................................46
4-4-1 HOW TO UTILIZE PC-HEALTH.............................................................47
4-5 PC-CILLIN INSTALL PC-CILLIN2000 ANTI-VIRUS SOFTWARE AND
APPLICATION PROGRAM......................................................4
4-6 HOW TO DISABLE ON-BOARD SOUND.................................................49
4-7 HOW TO UPDATE BIOS..............................................................................49
ii

USER’S NOTICE
COPYRIGHT OF THIS MANUAL BELONGS TO THE MANUFACTURER. NO PART OF
THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT
MAY BE REPRODUCED, TRANSMITTED OR TRANSLATED INTO ANY LANGUAGE IN
ANY FORM OR BY ANY MEANS WITHOUT WRITTEN PERMISSION OF THE
MANUFACTURER.
THIS MANUAL CONTAINS ALL INFORMATION REQUIRED TO USE 630AF MOTHER-
BOARD AND WE DO ASSURE THIS MANUAL MEETS USER’S REQUIREMENT BUT
WILL CHANGE, CORRECT ANY TIME WITHOUT NOTICE. MANUFACTURER PROVIDES
THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, AND WILL NOT BE
LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTIAL OR CONSEQUENTIAL DAMAGES
(INCLUDING DAMANGES FOR LOSS OF PROFIT, LOSS OF BUSINESS, LOSS OF USE
OF DATA, INTERRUPTION OF BUSINESS AND THE LIKE).
PRODUCTS AND CORPORATE NAMES APPEARING IN THIS MANUAL MAY OR MAY
NOT BE REGISTERED TRADEMARKS OR COPYRIGHTS OF THEIR RESPECTIVE
COMPANIES, AND THEY ARE USED ONLY FOR IDENTIFICATION OR EXPLANATION
AND TO THE OWNER’S BENEFIT, WITHOUT INTENT TO INFRINGE.
Manual Revision Information
1

Reversion Revision History Date
2.0 Second Edition Feb 2001
Item Checklist
Motherboard
Cable for IDE/Floppy
CD for motherboard utilities
□Cable for SB Port 3/4 (Option)
Cable for COM2
ser’s Manual
Intel Processor Family
Thermal Solutions
As processor technology pushes to faster speeds and higher performance, thermal
management becomes increasingly crucial when building computer systems. Maintaining
the proper thermal environment is key to reliable, long-term system operation. The
overall goal in providing the proper thermal environment is keeping the processor
below its specified maximum case temperature. Heatsinks induce improved processor
heat dissipation through increased surface area and concentrated airflow from attached
fans. In addition, interface materials allow effective transfers of heat from the
processor to the heatsink. For optimum heat transfer, Intel recommends the use of
thermal grease and mounting clips to attach the heatsink to the processor.
When selecting a thermal solution for your system, please refer to the website below
for collection of heatsinks evaluated and recommended by Intel for use with Intel
processors.
Vendor list for heatsink and fan of Pentium® !!! processor, please visit：
http://developer.intel.com/design/Pentiumiii/components/index.htm
Vendor list for heatsink and fan of Intel®Celeron™ processor, please visit：
http://developer.intel.com/design/celeron/components/index.htm
Chapter 1
2