JETWAY NMF891 Series User manual

NMF891Series
User sManual
G03-NMF891-F
Rev:1.0
Release date:February11,2019
Trademark:
*SpecificationsandInformation containedinthisdocumentationarefurnishedforinformationuseonly, andare
subjecttochangeatanytimewithoutnotice, and shouldnotbeconstruedas acommitmentbymanufacturer.

ii
ENVIRONMENTAL SAFETYINSTRUCTION........................................................................iii
ENVIRONMENTAL PROTECTIONANNOUCEMENT...........................................................iii
USER SNOTICE..................................................................................................................iv
MANUAL REVISIONINFORMATION...................................................................................iv
ITEMCHECKLIST................................................................................................................iv
CHAPTER1INTRODUCTIONOF THEMOTHERBOARD
1-1SPECIFICATION.....................................................................................................1
1-2LAYOUT DIAGRAM................................................................................................2
CHAPTER2HARDWAREINSTALLATION
2-1JUMPERSETTING.................................................................................................6
2-2CONNECTORSANDHEADERS............................................................................10
2-2-1REAR I/OBACK PANEL CONNECTORS.................................................10
2-2-2MOTHERBOARD INTERNAL CONNECTORS..........................................11
2-2-3HEADERPINDEFINITION........................................................................15
CHAPTER3INTRODUCINGBIOS
3-1ENTERNINGSETUP...............................................................................................19
3-2BIOSMENUSCREEN............................................................................................20
3-3FUNCTIONKEYS...................................................................................................20
3-4GETTINGHELP......................................................................................................21
3-5MENUBARS...........................................................................................................21
3-6MAINMENU............................................................................................................21
3-7ADVANCEDMENU.................................................................................................22
3-8CHIPSET MENU .....................................................................................................30
3-9SECURITYMENU...................................................................................................32
3-10BOOT MENU ..........................................................................................................34
3-11SAVE&EXIT MENU...............................................................................................35
TABLEOF CONTENT

iii
EnvironmentalSafetyInstruction
lAvoidthe dusty,humidityand temperatureextremes.Donot placethe productin
anyarea whereitmaybecomewet.
l0to40centigrade isthe suitabletemperature. (The figurecomesfromtherequest
of the mainchipset)
lGenerallyspeaking,dramaticchangesintemperaturemaylead tocontact
malfunction and cracklesdue toconstant thermalexpansion and contraction from
the welding spots thatconnectcomponentsand PCB.Computershouldgo
through an adaptivephasebeforeitbootswhen itismoved fromacold
environmenttoawarmerone toavoidcondensation phenomenon.Thesewater
dropsattached on PCBorthe surfaceofthecomponentscan bring about
phenomena asminorascomputerinstabilityresultedfromcorrosion and oxidation
fromcomponentsand PCBorasmajorasshortcircuitthatcan burnthe
components. Suggeststarting the computeruntil the temperaturegoesup.
lTheincreasingtemperatureofthe capacitormaydecreasethe lifeofcomputer.
Using the closecasemaydecreasethelifeofotherdevicebecausethe higher
temperatureinthe innerof the case.
lAttentiontothe heatsinkwhenyou over-clocking.The highertemperaturemay
decreasethe lifeof the deviceand burned thecapacitor.
EnvironmentalProtectionAnnouncement
Donotdisposethiselectronicdeviceintothetrashwhilediscarding.Tominimize
pollution and ensureenvironment protection ofmotherearth, pleaserecycle.

iv
USER SNOTICE
COPYRIGHTOFTHISMANUALBELONGSTOTHEMANUFACTURER.NOPARTOFTHISMANUAL,
INCLUDINGTHEPRODUCTSANDSOFTWAREDESCRIBEDINITMAYBEREPRODUCED, TRANSMITTED
ORTRANSLATEDINTOANYLANGUAGEINANYFORMORBYANYMEANSWITHOUTWRITTEN
PERMISSIONOFTHEMANUFACTURER.
THISMANUALCONTAINSALL INFORMATIONREQUIREDTOUSETHISMOTHER-BOARDSERIESANDWE
DOASSURETHISMANUALMEETSUSER SREQUIREMENTBUTWILL CHANGE,CORRECTANYTIME
WITHOUTNOTICE.MANUFACTURERPROVIDESTHISMANUAL “ASIS”WITHOUTWARRANTYOFANY
KIND,ANDWILL NOTBELIABLEFORANYINDIRECT,SPECIAL,INCIDENTALORCONSEQUENTIAL
DAMAGES (INCLUDINGDAMAGES FORLOSSOFPROFIT, LOSSOFBUSINESS, LOSS OFUSE OFDATA,
INTERRUPTIONOFBUSINESSANDTHELIKE).
PRODUCTSANDCORPORATENAMES APPEARINGINTHISMANUALMAYORMAYNOTBE
REGISTEREDTRADEMARKSORCOPYRIGHTSOFTHEIRRESPECTIVECOMPANIES,ANDTHEY ARE
USEDONLYFORIDENTIFICATIONOREXPLANATIONANDTOTHEOWNER SBENEFIT,WITHOUT
INTENTTOINFRINGE.
Manual Revision Information
Reversion Revision HistoryDate
1.0FirstEdition February11, 2019
ItemChecklist
RMotherboard
RUser sManual
RDVDformotherboardutilities
RCable(s)
RI/O Back panelshield

1
Chapter 1
IntroductionoftheMotherboard
1-1Specification
Spec
Description
Design
lm-ATXformfactor; PCBsize: 24.4x24.4cm
Chipset
l
Intel
®
H
3
10
Express
Chipset
CPUSocket lIntel®LGA1151 SocketforIntel®8th Generation Coffee
Lakeseriesprocessors(TDP65W)
*Note: fordetailed CPUsupport information pleasevisit our
website
MemorySlots l2*DDR4U-DIMM slot for2*DDR4RAMModule
lSupport dualchannelfunction
Maximumcapacity: up to32GB
Maximumfrequency: up to2666MHz
Expansion Slots
l1*PCI-Express x16 slot (PCIE1)
l1*PCI-Express x1slot (PCIE2)
l2*PCIslot (PCI1/2)
l1*Full-sizeMini-PCIEslot (MPE)
Storage l3*SATAIII6Gb/sport (SATA1/2/3)
l1*M.2M-keyslot, type-2242/2260/2280/22110
withSATA
interface(M2M)
LANChip
lIntegrated with2*RealtekRTL8111HGigabit PCI-ELAN
chip
lSupport Fast Ethernet LANfunction ofproviding
10/100/1000MbpsEthernet datatransferrate
AudioChip lRealtekALC662 6-channelAudioCodecintegrated
lAudiodriverand utilityincluded
BIOS
lAMIFlashROM
Multi I/O
RearPanelI/O:
l1*RS232/422/485 COMport (COM1)
l1*DPport
l1*HDMIport
l1*DVI-Dport
l1*VGAport
l2*USB 2.0port connector
l2*RJ-45 LANportconnector
l4*USB 3.1(Gen.1)port connector
l1*3-phone audiojack (Line-in, Line-out, MIC)
InternalI/OConnectors&Headers:
l1*24-pinmainpowerconnector
l1*8-pin12Vpowerconnector
l1*CPUFANconnector&2*SYSFANconnector

2
l1*Front panelheader
l1*PowerLED&Speakerheader
l1*Front panelaudioheader
l1*HDMI_SPDIFout header
l2*LANStatusindicatorheader(LAN1_LED/LAN2_LED)
l1*PS/2keyboard&mouseheader
l1*GPIOheader
l1*SMBUSheader
l1*9-pinfront panelUSB 2.0headerfor2*expansion
USB
2.0port
l1*RS232/422/485 COMport header(COM2)
l8*RS232 COMport header (COM3/4/5/6/7/8/9/10 )
1-2LayoutDiagram
RearIODiagram
USB2.0Ports
COM1
RS232/422/485
SerialPort VGAPort
DVI-DPort
USB3.1(Gen.1)
Ports
RJ-45LANPorts
Line-In
Line-Out
MIC
DPPort
HDMIPort

3
Motherboard InternalDiagram
*Note: SIMcardslot onlywork when compatibleSIMcardinstalled&LANexpansioncardinstalled in
MPE Mini-PCIEslot.
USB2.0
Header
*RearIO
Connector
(RefertoPage-2)
LGA1151
CPUSocket
ATX12V
PowerConnector
CPUFAN
Connector
ATXPower
Connector
S
YS
FAN
1
Connector
SYS
FAN
2
Connector
M.2M
-
KeySlot
(M2M)
PCIExpress x16Slot(PCIE1)
PCIExpress x1 Slot(PCIE2)
PCISlot
s
(PCI1/2)
HDMI_SPDIF
Header
LANLED
Headers
FrontPanel
Audio
Header
SATAIII Ports
(SATA1/2/3)
PWRLED
&
Speak
erHeader
FrontPanel
Header
*SIMCard
Slot
SMBUS
Header
Full
-
size
Mini-PCIE
Slot(*MPE)
DDR4
DIMMSlotx2
PS2KBMSHeader
GPIO
Header
Serial
Port
Headers
(COM8/7/6/5/4/3)
Serial
Port
Headers
(COM10/9)
Serial
Port
Header
(COM2)
IntelChipset
Buzzer

4
MotherboardJumperPosition
Jumper
Jumper
Na
me
Description
JPCOM1 COM1Port Pin9 Function Select4-pinBlock
JPCOM2 COM2HeaderPin9 Function Select 4-pinBlock
JPCOM3 COM3HeaderPin9 Function Select4-pinBlock
JPCOM4 COM4HeaderPin9 Function Select 4-pinBlock
JPCOM5 COM5HeaderPin9 Function Select 4-pinBlock
JPCOM6 COM6HeaderPin9 Function Select 4-pinBlock
JBAT ClearCMOSRAMSettings 3-pinBlock
JAT_ATX ATX/ATMode Select 3-pinBlock
JP1 MEFeaturesSelect 2-pinBlock
COPEN CaseOpen Message DisplayDetect 2-pinBlock
JP2 MPE (MiniPCI-E)Slot VCC3.3V/3.3VSBSelect 3-pinBlock
JAT_ATX
JBAT
JPCOM5
JPCOM6
JPCOM3
JPCOM4
JPCOM1
JP2
COPEN
JP1
JPCOM2

5
Connectors
Connector
Name
COM1RS232/422/485 SerialPort Connector
DP DisplayPort Connector
HDMI High-Definition MultimediaInterface
Connector
USB1 USB 2.0Port ConnectorX2
CRT VGAPort Connector
DVI1 DVI-DPort Connector
UL1/UL2
Top:
RJ
-
45 LANConnector
X2
Middle&Bottom: USB 3.1(Gen.1)Port
ConnectorX4
AUDIO
Top:
Line
-
in
Connector
Middle: Line-out Connector
Bottom: MICConnector
ATXPWR ATXType MainPowerConnector
ATX12V ATX12VPowerConnector
CPUFAN CPUFANConnector
SYSFAN1/2 SystemFANConnector
SATA1/2/3 SATAIIIConnectorX3
Headers
Header
Name
Description
FP
(Front PanelHeader)
PWRLED/HD LED/PowerButton
/Reset 9-pinBlock
SPK_LED PowerLED&SpeakerHeader 7-pinBlock
FP_AUDIO Front PanelAudioHeader 9-pinBlock
HDMI_SPDIF HDMI_SPDIFOut Header 2-pinBlock
LAN1_LED
/ LAN2_LED LANLEDActivityHeader 2-pinBlock
PS2KBMS PS2Keyboard&MouseHeader 6-pinBlock
GPIO_CON GPIOHeader 10-pinBlock
SMBUS SMBUSHeader 5-pinBlock
USB2 USB 2.0Port Header9-pinBlock
COM2RS232/422/485 SerialPort Header
9-pinBlock
COM3/4/5/6/7/8/9/10
RS232 SerialPort Header 9-pinBlock

6
Chapter 2
Hardware Installation
2-1JumperSetting
JPCOM1(4-pin):COM1PortPin9Function Select
JPCOM1
COM1Port
6
4
2
3
1
5
1
2
4
6
3
5
2
4
6
1
3
5
2-4Closed:
RI=RS232; 3-4Closed: RI=5V; 4-6 Closed:
RI=12V;
JPCOM2(4-pin):COM2HeaderPin9FunctionSelect
JPCOM2
COM2Header
4-6 Closed:
RI=12V.
6
4
2
3-4 Closed:
RI=5V;
2-4 Closed:
RI=RS232;
3
1
5
6
4
2
3
5
1
5
3
1
6
4
2
JPCOM3(4-pin):COM3HeaderPin9FunctionSelect
JPCOM3
COM3Header
4-6Closed:
RI=12V.
6
4
2
3-4Closed:
RI=5V;
2-4Closed:
RI=RS232;
3
1
5
6
4
2
3
5
1
5
3
1
6
4
2
COM2
JPCOM2
COM3
JPCOM3
JPCOM1

7
JPCOM4(4-pin):COM4HeaderPin9FunctionSelect
JPCOM4
COM4Header
4-6Closed:
RI=12V.
6
4
2
3-4Closed:
RI=5V;
2-4Closed:
RI=RS232;
3
1
5
6
4
2
3
5
1
5
3
1
6
4
2
JPCOM5(4-pin):COM5HeaderPin9FunctionSelect
JPCOM5
COM5Header
4-6Closed:
RI=12V.
6
4
2
3-4Closed:
RI=5V;
2-4Closed:
RI=RS232;
3
1
5
6
4
2
3
5
1
5
3
1
6
4
2
JPCOM6(4-pin):COM6HeaderPin9FunctionSelect
JPCOM6
COM6Header
4-6Closed:
RI=12V.
6
4
2
3-4Closed:
RI=5V;
2-4Closed:
RI=RS232;
3
1
5
6
4
2
3
5
1
5
3
1
6
4
2
COM4
JPCOM4
COM5
JPCOM5
COM6
JPCOM6

8
JBAT(3-pin): ClearCMOSRAMSettings
2-3Closed:ClearCMOS.
1-2Closed:Normal
1
3
1
3
JBAT ClearCMOS
JAT_ATX(3-pin): ATMode/ATXModeSelect
1
3
1
3
JAT_ATX ATX/ATModeSelect
1-2Closed:ATXModeSelected;
2-3Closed:ATModeSelected.
*ATXModeSelected: Press powerbutton topoweron afterpowerinput ready;
ATModeSelected: Directlypoweron aspowerinput ready.
JP1(2-pin): MEFeatures Select
1-2Closed:MEFeatures Disabled.
JP1 MEFeatures
2
1
1
-
2
Open
:MEFeaturesEnabled;
1
2
JBAT
JAT_ATX
JP1

9
COPEN(2-pin):Case OpenMessageDisplayFunction
Pin1 2
COPEN CaseOpenDetection
CASE
OPEN
GND
Pin1-2Short:When Caseopen functionpinshorttoGND,the Caseopenfunction
wasdetected.WhenUsed,needstoenterBIOSand enable CaseOpen Detect’
function.Inthiscaseifyourcaseisremoved,nexttimewhen you restartyour
computer, amessagewillbe displayedon screen toinformyou ofthis.
JP2(3-pin): MPE (MiniPCI-E)SlotVCC 3.3V/3.3VSBSelect
2-3Closed:MINI PCI-ESlotVCC =3.3VSB.
JP2→Mini-PCIESlotVCCSelect
1-2Closed:MINI PCI-ESlotVCC=3.3V;
3
1
1
3
COPEN
JP2

10
2-2ConnectorsandHeaders
2-2-1RearI/OBackPanelConnectors
Icon NameFunction
RS232/422/485
SerialPort
MainlyforusertoconnectexternalMODEMor
otherdevicesthatsupports
SerialCommunicationsInterface.
*Note: COM1supportsRS232/422/485 function.
DisplayPort Tothesystemtocorresponding displaydevice
withcompatibleDPcable.
HDMIPort Toconnect displaydevicethat support HDMI
specification.
DVI-DPort
Toconnect displaydevicethat support DVI
specification.
VGAPort VGAconnectoristhe15-pinD-subminiature
femaleconnector;itisforthedisplaydevices,
suchastheCRTmonitor, LCD monitorand soon.
USB2.0Port Toconnect USB keyboard, mouseorother
devicescompatiblewithUSB 2.0specification.
USB3.1(Gen.1)
Port
Toconnect USB keyboard, mouseorother
devicescompatiblewithUSB 3.1(Gen.1)
specification. Portssupport up to5Gbpsdata
transferrate.
RJ-45 LANPortThisconnectorisstandardRJ-45 LANjackfor
Networkconnection.
Audio Connectors
BLUE: Line-inConnector
GREEN:Line-out Connector
PINK: MICConnector
USB2.0Ports
COM1
RS232/422/485
SerialPort VGAPort
DVI-DPort
USB3.1(Gen.1)
Ports
RJ-45LANPorts
Line-In
Line-Out
MIC
DPPort
HDMIPort

11
COM1(9-pinBlock):RS232/422/485 Port
COM1portcanfunctionasRS232/422/485 port. InnormalsettingsCOM1functions
asRS232 port. WithcompatibleCOMcableCOM1can function asRS422 orRS485
port. Useralsoneedstogo toBIOStoset ‘Transmission ModeSelect forCOM1
at first, beforeusing specialized cabletoconnect different pinsof thisport.
ForRS422 Mode
RS422TX
-
(B)
RS422TX+(A
)
RS422RX+(A
)
RS422
R
X
-
(B)
(B)
ForRS485 Mode
RS4
85
D
-
(B)
RS4
85
D+
(
A
)
2-2-2Motherboard Internal Connectors
(1)ATXPWR(24-pinblock):MainPowerConnector
ATXPowerSupplyconnector:Thisisanewdefined 24-pinsconnectorthatusually
comeswithATXcase.The ATXPowerSupplyallowsusing soft poweron momentary
switchthatconnect fromthe frontpanelswitchto2-pinsPowerOnjumperpoleonthe
motherboard.When the powerswitchon the backofthe ATXpowersupplyturned
on,the full powerwill notcomeintothe systemboarduntil the frontpanelswitchis
momentarilypressed.Pressthisswitchagainwill turnoff the powertothe system
board.
** Werecommendthatyou usean ATX12VSpecification 2.0-compliantpowersupply
unit(PSU)withaminimumof350Wpowerrating.Thistype has24-pinand4-pin
powerplugs.
**Ifyou intend touseaPSUwith20-pinand4-pinpowerplugs,makesurethatthe
20-pinpowerplug can provide at least 15Aon +12Vand the powersupplyunit hasa
minimumpowerrating of350W.The systemmaybecomeunstableormaynotboot
up if the powerisinadequate.
** Ifyou areusing a20-pinpowerplug,pleaserefertoFigure1 forpowersupply
connection.Powerplug formpowersupplyand powerconnectorsfrommotherboard
bothadoptkeydesign toavoidmistakeinstallation. You caninsert thepowerplug into
the connectorwitheaseonlyinthe right direction. If the directioniswrong it ishardto
fit inandif you makethe connection byforceif ispossible.
PIN
ROW1 ROW2
1 +3.3V +3.3V
2 +3.3V -12V
3 GND GND
4 +5V SoftPoweron
5 GND GND
6 +5V GND
7 GND GND
8 PowerOK -5V
9 +5VStandby
+5V
10 +12V +5V
11 +12V +5V
12 +3.3V GND
24-pinMainPowerConnector

12
Figure1 20-pinpowerplugFigure2 24-pinpowerplug
(2)ATX12V(8-pinblock):12VPowerConnector
Thisisanewdefined 8-pinconnectorthat usuallycomeswithATXPowerSupplythat
supportsextra12Vvoltage tomaintainsystempowerconsumption.Withoutthis
connectormightcausesystemunstablebecausethepowersupplycan notprovide
sufficientcurrent forsystem.
Pin1
4
PinNo.Definition
PinNo.
Definition
1 GND 5 +12V
2 GND 6 +12V
3
GND
7
+12V
4
GND
8
+12V
(3)SATA1/2/3(7-pin):SATAIII Portconnector
Theseconnectorsarehigh-speed SATAIIIportsthat support 6GB/stransferrate.
PinNo. Definition
1 GND
2 TXP
3 TXN
4 GND
5 RXN
6 RXP
7 GND

13
(4)CPUFAN/SYSFAN1/SYSFAN2(4-pin):FanConnectors
Pin
1
+12V Fan Power
GND
FanSpeed
Control
SYSFAN2
FanSpeed
GND
Pin1
+12V Fan Power
Control
CPUFAN/SYSFAN1
(5)M2M:M.2M-KeySlot
M2MM.2M-Keyslotsupportscompatibletype 2242/2260/2280/22110SATAmodule.
M2
MSlot:
M.2ModuleInstallation Guide
1.PreparecompatibleM.2SATAorM.2SSDcard. Deferent typeofcardshasdifferent
length. Findcorrespondingnutlocationforfurtherinstallation.
NutLocation MH1 MH2 MH3 MH4
Card Length 4.2cm 6cm 8cm 11 cm
ModuleType Type-2242
Type-2260
Type-2280
Type-22110
CPUFAN
SYSFAN1
SYSFAN2

14
2.Removethescrewpost and nutfixed at
location MH4 bydefault(Skipstep2&3
andgostraighttoStep 4ifyouaregoing
tousethedefaultnut).
3.Lockthescrewpost intothelocation
correspondingtothelengthofthe
module.
4.Alignandinsert correspondingM.2
module, asthephotoshows. 5.Tighten upthescrewtosecurethe moduleintotheM.2connector.Mare
surenot overtightenthescrewtoavoid
possibledamagetothemodule.
(6)Dual Channel MemoryInstallation
Notice!
lFordualchannelinstallation, you need toinstallthe samebrand, speed,sizeand
type memorymodule.
lItisunabletoactivatedualchannelfeatureifyou install onlyonememorymodule.
Slot ordercanbe fromleft-to-right orright-to-left, and itmust be installedinpairs.
lIfyou installmemorymodulesinwrong direction,it will damage themotherboard
and memorymodule.
config DIMM1DIMM2
1 install --
2 -- install
3 install install

15
2-2-3HeaderPin Definition
(1)FP(9-pin):FrontPanel Header
HDD LED+
GND
HDDLED-
GND
RSTSW
PWRBTN
Pin1
2
VCC
PWRLED+
PWRLED-
(2)SPK_LED(7-pin):PWRLEDHeader&SpeakerHeader
Pin1
PWRLED+
SPEAK+
NC SPEAK-
NC
PWRLED
-
PWRLED
-
(3)FP_AUDIO(9-pin):Line-Out, MIC-InHeader
ThisheaderisconnectedtoFront PanelLine-out, MICconnectorwithcable.
Pin1
MIC2-L
LINE OUT-L
MIC
2
-
R
LINE OUT-R
SENSE
GND
LINE_OUT_JD
MIC_JD
DETECT
2
FP
SPK_L
ED
FP_AUDIO

16
(4)HDMI_SPDIF(2-pin):HDMI-SPDIFOutheader
Pin
1
SPDIF_OUT
GND
(5)LAN1_LED/ LAN2_LED(2-pin):LANLEDHeader
Pin
1
LAN
LED
-
LAN
LED
+
(6)PS2KBMS(6-pin):PS/2Keyboard&Mouse Header
GND
KB_CLK
KB_DATA
Pin1
MS_DATA
VCC
MS_CLK
LAN1_LED
LAN2_LED
HDMI_SPDIF
PS2KBMS