Johnson & Johnson DePuy Synthes Small Battery Drive II Configuration guide

Small Battery Drive II
Manual and Mechanical
Cleaning Instructions
Cleaning Guide

Cleaning Guide
Small Battery Drive II
1 Remove debris.
Rinse the device under running cold tap water for a
minimum of 2 minutes. Use a sponge, soft lint-free cloth,
or soft-bristled brush to assist in removing gross soil.
For cannulations of the handpiece and attachments, the
cleaning brush (519.40) should be used.
Note: Do not use pointed objects for cleaning.
2 Manipulate moving parts.
Manipulate all moving parts such as the triggers, sleeves,
and switches under running tap water to loosen and
remove gross debris.
Manual Cleaning Instructions
3 Spray and wipe.
Spray and wipe the device using a neutral pH enzymatic
solution for a minimum of 2minutes.
Follow the enzymatic detergent manufacturer’s
directions for correct temperature, water quality
(i.e., pH, hardness) and concentration/dilution.
4 Clean with detergent.
Clean the device manually under running warm water
using an enzymatic cleaner or detergent for a minimum
of 5minutes. Manipulate all moving parts under running
water. Use a soft-bristled brush and/or soft lint-free cloth
to remove all visible soil and debris.
Follow the enzymatic cleaner or detergent manufacturer’s
instructions for use for correct temperature, water
quality, and concentration/dilution.
Handpieces, battery casings, sterile covers and
attachments must be processed using
a) manual cleaning and / or
b) automated cleaning with manual pre-cleaning.
(78 mm) (61 mm)
(265 mm)
(B3,6 mm)
Cleaning Brush (519.400)

Mechanical/Automated Cleaning Instruction with Manual Pre-cleaning
Important:
• Manual pre-cleaning prior to automated cleaning/
disinfection is important to ensure that cannulations
and other difficult to access areas are clean.
5 Rinse with tap water.
Rinse the device thoroughly using cool to lukewarm
running water for a minimum of 2minutes. Use a
syringe, pipette, or water jet to flush lumens and
channels. Actuate joints, handles, and other movable
device features in order to rinse thoroughly under
running water.
6 Visually inspect device.
Inspect the cannulations, coupling sleeves, etc., for visible
soil. Repeat steps 1 to 6 until no visible soil remains.
7 Final rinse with de-ionized/
purified water.
Final rinse with de-ionized or purified water for a
minimum of 2minutes.
8 Dry.
Dry device using a soft lint-free cloth or clean
compressed air.
9 Sterilize.
Sterilize device per sterilization instructions
located in Manual.
Follow steps 1 through 6 of the
Manual Cleaning Instructions.
7 Load washing basket.
Place devices in the specially designed tray for machine
washing supplied by DePuy Synthes Power Tools
(68.001.610). Ensure that all cannulations (handpiece
and attachments), if applicable, are positioned vertically,
i.e., in an upright position as shown.
Note: Specific lid (68.001.602) is available for the
washing basket.

9 Inspect the device.
Remove all the devices from the washing basket. Inspect the cannulations,
coupling sleeves, etc., for visible soil. If necessary, repeat the manual
preclean/automated cleaning cycle. Confirm that all parts are completely dry.
Mechanical cleaning/disinfection is an additional stress for power equipment,
especially for seals and bearings. Therefore, systems must be properly
lubricated and regularly sent to be serviced at least once per year.
10 Sterilize.
Sterilize device per sterilization instructions located in Manual.
Step Duration Cleaning instructions
(minimum)
Rinse 2 minutes Cold tap water
Pre-wash 1 minute Warm water (≥40°C); use detergent
Cleaning 2 minutes Warm water (≥45°C); use detergent
Rinse 5 minutes Rinse with de-ionized (DI) or purified water (PURW)
Thermal disinfection 5 minutes Hot DI water, ≥93°C
Dry 40 minutes ≥90°C
8 Automated cleaning cycle parameters
Note: The washer/disinfector should fulfill the requirements as specified in ISO 15883.

© DePuy Synthes 2020. All rights reserved.
DSUS/PWT/0714/0051 Rev 2
Manufactured or distributed by:
Synthes USA, LLC.
1101 Synthes Avenue
Monument, CO 80132
USA
To order (USA): 800-327-6887
To order (Canada): 855-946-8999
Note: For recognized manufacturer, refer to the product label.
www.jnjmedicaldevices.com
Limited Warranty and Disclaimer: DePuy Synthes Companies products are sold with a limited
warranty to the original purchaser against defects in workmanship and materials. Any other express
or implied warranties, including warranties of merchantability or fitness, are hereby disclaimed.
Please also refer to the package insert(s) or other labeling associated with the devices identified in
this user‘s manual.
CAUTION: USA Law restricts these devices to sale by or on the order of a physician.
Some devices listed in this user‘s manual may not have been licensed in accordance with Canadian
law and may not be for sale in Canada. Please consult your sales consultant for items approved for
sale in Canada.
Not all products are currently commercially available in all markets.