Johnson Controls tyco Power Neo HS2016 User manual

*29009812R006*
PowerSeries Neo HS2016/HS2016-4/
HS2032/HS2064/HS2064 E/HS2128/
HS2128 E Alarm Controller Reference
Manual
29009812R006

2PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual

Contents
ContentsSafety Instructions for Service Personnel................................................................................................... 13
Introduction.................................................................................................................................................... 15
About the System.................................................................................................................................15
Features................................................................................................................................................ 15
Zones, Wireless Keypads, Wireless Keys, Panic Pendants and Proximity Tags.................................. 15
Access codes............................................................................................................................................... 16
Programmable Outputs (PGMs)...............................................................................................................16
System Supervision Features....................................................................................................................16
Additional Features....................................................................................................................................16
Available Models..................................................................................................................................16
Model Differences......................................................................................................................................17
Compatible Devices.............................................................................................................................18
Introduction.................................................................................................................................................... 21
Installation...................................................................................................................................................... 22
Overview of Installation Process........................................................................................................22
Alarm Controller Installation..............................................................................................................23
Mounting the Enclosure............................................................................................................................23
Wiring....................................................................................................................................................23
Terminal Descriptions................................................................................................................................23
Wire Routing for Power & Non-Power Limited.......................................................................................23
Corbus Wiring.............................................................................................................................................25
Installing Modules............................................................................................................................... 28
Zone Expander........................................................................................................................................... 28
Output Expander........................................................................................................................................29
Wireless Transceiver Module....................................................................................................................29
Power Supply Wiring..................................................................................................................................30
Keypad Wiring............................................................................................................................................ 30
HSM2955 Wiring......................................................................................................................................... 31
Alternate Communicator Wiring.............................................................................................................. 31
Zone Wiring.................................................................................................................................................31
PGM Wiring................................................................................................................................................. 34
Bell Wiring...................................................................................................................................................34
Telephone Line Wiring...............................................................................................................................34
Smoke Detector Wiring............................................................................................................................. 35
CO Detector.................................................................................................................................................36
Ground Wiring............................................................................................................................................ 38
Connecting Power......................................................................................................................................38
Configuration..................................................................................................................................................40
Basic Configuration Steps...................................................................................................................40
Using the Keypad.................................................................................................................................40
Special Keys.................................................................................................................................................40
LED Indicators.............................................................................................................................................40
PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual 3

Enrollment............................................................................................................................................ 42
Enrolling Modules...................................................................................................................................... 42
Module Supervision................................................................................................................................... 43
Enroll Wireless Devices..............................................................................................................................43
Working with Partitions...................................................................................................................... 44
Setting Up a Partition................................................................................................................................ 44
Bell/Siren Operation.................................................................................................................................. 44
Interconnected Smoke Detector Operation........................................................................................... 44
Trouble Indicators............................................................................................................................... 45
Keypad Partition Setup....................................................................................................................... 45
Loaned Partition Setup..............................................................................................................................45
Global Zones...............................................................................................................................................45
Fire and CO Zone Types.............................................................................................................................46
Bell/PGM Support...................................................................................................................................... 46
Communications........................................................................................................................................ 46
Assign Zones...............................................................................................................................................46
Assign Users............................................................................................................................................... 46
Factory Defaults......................................................................................................................................... 46
Alternate Communicator Setup.........................................................................................................47
Real Time Clock.......................................................................................................................................... 47
Communication Paths............................................................................................................................... 48
Communications Options......................................................................................................................... 48
Communication Attempt Limit.................................................................................................................48
Supervision Restore...................................................................................................................................48
Remote Firmware Upgrade...................................................................................................................... 48
Local Firmware Upgrade.................................................................................................................... 49
Testing the System.............................................................................................................................. 49
Installer Walk Test......................................................................................................................................49
Viewing the Event Buffer...........................................................................................................................49
System Operation...........................................................................................................................................50
Arming and Disarming........................................................................................................................50
Partition vs. Global Keypad........................................................................................................................... 51
Single Partition Operation..................................................................................................................51
Global/Multiple Partition Operation................................................................................................. 51
Labels...............................................................................................................................................................53
System Label........................................................................................................................................ 53
Zone Labels.......................................................................................................................................... 53
Partition Labels.................................................................................................................................... 53
Module Labels......................................................................................................................................53
Event Labels......................................................................................................................................... 53
Partition Command Output Labels................................................................................................... 54
Annunciation...................................................................................................................................................55
PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual4

Door Chime.......................................................................................................................................... 55
Temperature Display...........................................................................................................................55
Low Temperature Warning.................................................................................................................55
Keypad Function Keys....................................................................................................................................56
Function Key Definitions.....................................................................................................................56
[00] Null Function Key................................................................................................................................56
[02] Instant Stay Arm.................................................................................................................................56
[03] Stay Arm.............................................................................................................................................. 56
[04] Away Arm............................................................................................................................................ 57
[05] No-Entry Arm [*][9]............................................................................................................................57
[06] Chime On/Off......................................................................................................................................57
[07] System Test......................................................................................................................................... 57
[09] Night Arm............................................................................................................................................57
[12] Global Stay Arm.................................................................................................................................. 57
[13] Global Away Arm................................................................................................................................ 57
[14] Global Disarming................................................................................................................................57
[16] Quick Exit.............................................................................................................................................57
[17] Arm Interior........................................................................................................................................ 57
[21]-[24] Command Output 1 to 4............................................................................................................58
[29] Bypass Group Recall...........................................................................................................................58
[31] Local PGM Activate.............................................................................................................................58
[32] Bypass Mode.......................................................................................................................................58
[33] Bypass Recall.......................................................................................................................................58
[34] User Programming............................................................................................................................ 58
[35] User Functions....................................................................................................................................58
[37] Time & Date Program........................................................................................................................ 58
[39] Trouble Display...................................................................................................................................59
[40] Alarm Memory....................................................................................................................................59
[61]-[68] Partition 1 to 8 Select................................................................................................................. 59
Language Selection........................................................................................................................................60
[*] Commands................................................................................................................................................61
[*][1] Bypass or Stay/Away/Night Zones..........................................................................................61
When The Alarm System is Disarmed..................................................................................................... 61
Bypassing zones with an LCD keypad:.................................................................................................... 61
Bypassing zones with a LED/ICON keypad:............................................................................................62
Other Bypass Features:............................................................................................................................. 62
When The Alarm System is Armed...........................................................................................................62
Troubleshooting.................................................................................................................................. 63
[*][2] Trouble Display..........................................................................................................................63
[*][3] Alarm Memory Display.............................................................................................................66
[*][4] Door Chime Enable/Disable.....................................................................................................66
[*][5] Program Access Codes.............................................................................................................66
Assign Access Codes..................................................................................................................................66
5PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual

Access code types...................................................................................................................................... 66
To add an access code using an LCD keypad:........................................................................................ 68
On an LED/ICON keypad:..........................................................................................................................68
Access Code Attributes..............................................................................................................................68
Add User Labels..........................................................................................................................................69
Assigning Proximity Tags.......................................................................................................................... 70
Assigning Users to Partitions................................................................................................................... 70
User Authentication Options.................................................................................................................... 71
[*][6] User Functions...........................................................................................................................71
Event Buffer................................................................................................................................................ 71
System Test.................................................................................................................................................71
Time and Date............................................................................................................................................ 71
Auto-Arm/Disarm.......................................................................................................................................71
Auto-Arm Time........................................................................................................................................... 72
Enable DLS/Allow System Service............................................................................................................ 72
User Call-up................................................................................................................................................ 73
User Walk Test............................................................................................................................................ 73
Late to Open............................................................................................................................................... 73
Late to Open Time......................................................................................................................................73
SMS Programming.....................................................................................................................................73
Brightness Control.....................................................................................................................................74
Contrast Control.........................................................................................................................................74
Buzzer Control............................................................................................................................................74
Authorize Firmware Update......................................................................................................................74
Interactive Services....................................................................................................................................74
[*][7] Command Outputs 1-4.............................................................................................................75
[*][8] Installer Programming.............................................................................................................75
[*][9] No-Entry Arming....................................................................................................................... 75
[*][0] Quick Arm/Exit.......................................................................................................................... 76
When disarmed:.........................................................................................................................................76
When armed:.............................................................................................................................................. 76
SMS Command and Control..........................................................................................................................77
SMS Command and Control Functions............................................................................................. 77
Visual Verification...........................................................................................................................................78
System Operation...........................................................................................................................................79
Programming................................................................................................................................................. 80
How to Program.................................................................................................................................. 80
Programming Methods.................................................................................................................................81
Template Programming......................................................................................................................81
DLS Programming............................................................................................................................... 82
Local Programming With PC-Link............................................................................................................ 82
Remote Programming...............................................................................................................................83
Installer Programming........................................................................................................................83
PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual6

Viewing Programming........................................................................................................................ 83
Keypad Types..............................................................................................................................................83
Programming Hex and Decimal Data............................................................................................... 85
Programming Descriptions...........................................................................................................................86
Adding Labels.......................................................................................................................................86
[000] Label Programming......................................................................................................................... 86
[000] Language Selection..........................................................................................................................86
[001]-[128] Zone Labels............................................................................................................................. 86
[051] Zone Tamper Label.......................................................................................................................... 87
[052] Zone Fault Label............................................................................................................................... 87
[064] CO Alarm Message...........................................................................................................................88
[065] Fire Alarm Message..........................................................................................................................88
[066] Fail To Arm Event Message............................................................................................................. 88
[067] Alarm When Armed Event Message.............................................................................................. 88
[100] System Label..................................................................................................................................... 88
[101]-[108] Partition 1-8 Labels................................................................................................................ 88
[201]-[208][001]-[004] Partition Command Output Labels................................................................... 88
[601]-[604] Schedule Labels......................................................................................................................88
[801] Keypad Labels...................................................................................................................................88
[802][001]-[015] HSM2108 Zone Expander Labels................................................................................. 88
[803][001]-[016] HSM2208 Output Expander Label............................................................................... 88
[806] HSM2HOSTx Label............................................................................................................................89
[808] HSM2955 Label................................................................................................................................. 89
[809][001]-[004] HS2300 Power Supply Label.........................................................................................89
[810][001]-[004] HS2204 High-Current Output Supply Label............................................................... 89
[815] Alternate Communicator Label...................................................................................................... 89
[820][001]-[016] Siren Labels.................................................................................................................... 89
[821][001]-[008] Repeater Labels............................................................................................................. 89
[999][Installer Code][999] Default Labels............................................................................................... 89
Zone Setup........................................................................................................................................... 89
[001] AssignZone Types.............................................................................................................................89
[002] Zone Attributes.................................................................................................................................96
Assign zone attributes:..............................................................................................................................96
System Times....................................................................................................................................... 98
[000] – System Area................................................................................................................................... 98
[001]-[008] Partition 1-8 Timers................................................................................................................99
[900] – Bell Delay Partition Mask..............................................................................................................99
[901]/[902] – Daylight Savings Begin/End...............................................................................................99
Access Codes......................................................................................................................................100
[006] Installer Defined Access Codes.....................................................................................................100
[007] - [008] PGM Configuration......................................................................................................100
[007] PGM Programming........................................................................................................................ 101
[008] PGM Timer Programming............................................................................................................. 101
7PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual

[009] PGM Types................................................................................................................................ 101
[001]-[164] Select PGM............................................................................................................................ 101
100 - Null PGM.......................................................................................................................................... 101
101 - Burglary and Fire Bell Follower.....................................................................................................101
102 - Delayed Fire and Burglary............................................................................................................. 102
103 - Sensor Reset [*][7][2].................................................................................................................... 102
104 - 2-Wire Smoke.................................................................................................................................. 102
109 - Courtesy Pulse................................................................................................................................ 102
111 - Keypad Buzzer Follow.................................................................................................................... 103
114 - Ready to Arm...................................................................................................................................103
115 - System Armed Status..................................................................................................................... 103
116 - Away Armed Status........................................................................................................................ 103
117 - Stay Armed Status.......................................................................................................................... 103
120 - Away Armed with No Zone Bypasses Status...............................................................................103
121-124 – Command Outputs 1-4...........................................................................................................103
129 - Partition Status Alarm Memory.................................................................................................... 103
132 - Holdup Output................................................................................................................................ 104
134 - 24-Hour Silent Input (PGM 2)........................................................................................................ 104
132 - 24-Hour Audible Input (PGM 2).................................................................................................... 104
146 - TLM and Alarm................................................................................................................................104
147 - Kissoff...............................................................................................................................................105
148 - Ground Start....................................................................................................................................105
149 - Alternate Communicator............................................................................................................... 105
155 - System Trouble............................................................................................................................... 105
156 - Latched System Event (Strobe)..................................................................................................... 106
157 - System Tamper............................................................................................................................... 106
161 - DC Trouble.......................................................................................................................................107
165 - Proximity Tag Used........................................................................................................................ 107
166 - Partition Prox Used........................................................................................................................ 107
175 - Bell Status and Programming Access Output.............................................................................107
176 - Remote Operation.......................................................................................................................... 107
184 - Open After Alarm............................................................................................................................107
200 - Zone Follower - PGM By Zone....................................................................................................... 107
201-216 – Zone Follower (Zones 1-128)................................................................................................. 107
[010] PGM Attributes.........................................................................................................................108
[000] Main Bell Mask................................................................................................................................108
[001]-[164] PGM 001-164 Attributes.......................................................................................................109
[011] PGM Configuration Options................................................................................................... 118
[001]-[164] Select PGM............................................................................................................................ 118
Zone Follow PGM By Zone...................................................................................................................... 118
Proximity Tag Used.................................................................................................................................. 118
Command Output 1-4..............................................................................................................................119
[012] System Lockout........................................................................................................................119
Keypad Lockout – Number of Invalid Local Attempts......................................................................... 119
PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual8

Keypad Lockout Duration........................................................................................................................119
Remote Lockout DLS................................................................................................................................119
Remote Lockout Duration.......................................................................................................................119
System Options..................................................................................................................................119
[013] System Option 1............................................................................................................................. 119
[014] System Option 2............................................................................................................................. 121
[015] System Option 3............................................................................................................................. 122
[016] System Option 4............................................................................................................................. 123
[017] System Option 5............................................................................................................................. 124
[018] System Option 6............................................................................................................................. 125
[019] System Option 7............................................................................................................................. 126
[020] System Option 8............................................................................................................................. 127
[021] System Option 9............................................................................................................................. 129
[022] System Option 10........................................................................................................................... 130
[023] System Option 11........................................................................................................................... 131
[024] System Option 12........................................................................................................................... 132
[025] System Option 13........................................................................................................................... 133
[040] User Authentication....................................................................................................................... 134
[041] Access Code Digits......................................................................................................................... 134
[042] Verified Events................................................................................................................................ 135
Partition Setup................................................................................................................................... 135
[151]-[158] Partition Auto-Arm/Disarm.................................................................................................135
[200] Partition Mask.................................................................................................................................136
[201]-[208] Partition Zone Assignment................................................................................................. 137
[300] Panel/Receiver Communication Paths........................................................................................ 137
[301] Phone Number Programming......................................................................................................138
[304] Call Waiting Cancel String............................................................................................................. 138
Reporting............................................................................................................................................139
[307] Zone Reporting...............................................................................................................................139
[308] Event Reporting..............................................................................................................................139
System Communications..................................................................................................................146
[309] System Call Direction..................................................................................................................... 146
[310] Account Codes................................................................................................................................ 146
[311]-[318] Partition Call Directions.......................................................................................................147
[350] Communicator Formats................................................................................................................ 148
[377] Communication Variables............................................................................................................. 148
[380] Communicator Option 1................................................................................................................150
[381] Communicator Option 2................................................................................................................152
[382] Communicator Option 3................................................................................................................153
[383] Communicator Option 4................................................................................................................153
[384] Communicator Backup Options................................................................................................... 154
[385] Audio Module Talk\Listen Mask................................................................................................... 154
DLS Programming............................................................................................................................. 155
[401] DLS/SA Options.............................................................................................................................. 155
9PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual

[402] PSTN DLS Phone Number Programming....................................................................................156
[403] DLS Access Code.............................................................................................................................156
[404] DLS/SA Panel ID..............................................................................................................................156
[405] PSTN Double Call Timer.................................................................................................................156
[406] PSTN Number of Rings to Answer On......................................................................................... 156
[407] SA Access Code...............................................................................................................................157
[410] Automatic DLS/SA Options........................................................................................................... 157
Virtual Inputs......................................................................................................................................158
[560][001]-[032]........................................................................................................................................ 158
Schedule Programming....................................................................................................................158
[601]-[604] Programming Schedule 1-4................................................................................................ 158
[711]-[714] Holiday Schedules................................................................................................................ 158
[802] Audio Verification Module Programming.............................................................................159
Wireless Programming..................................................................................................................... 159
[804] Wireless Programming..................................................................................................................159
[850] Cellular Signal Strength.................................................................................................................159
[851] Alternate Communicator Programming..................................................................................... 159
[860] Display Keypad Slot Number........................................................................................................ 160
[861]-[876] Keypad Programming......................................................................................................... 160
[899] Template Programming................................................................................................................ 160
Systems Information.........................................................................................................................160
[900] System Information....................................................................................................................... 160
[901] Installer Walk Test Mode Enable/Disable....................................................................................161
Module Programming.......................................................................................................................161
[902] Add/Remove Modules................................................................................................................... 161
Deleting Modules.....................................................................................................................................162
[903] Confirm Module..............................................................................................................................162
Testing.................................................................................................................................................164
[904] Wireless Placement Test................................................................................................................164
[912] Soak Test......................................................................................................................................... 165
[982] Battery Settings.............................................................................................................................. 165
Defaults...............................................................................................................................................165
[989] Default Master Code......................................................................................................................165
[990] Installer Lockout Enable/Disable................................................................................................. 166
[991] Default Keypads............................................................................................................................. 166
[993] Default Alternate Communicator.................................................................................................166
[996] Default Wireless Receiver..............................................................................................................166
[998] Default HSM2955............................................................................................................................166
[999] Default System................................................................................................................................166
Programming............................................................................................................................................... 167
Programming Worksheets..........................................................................................................................168
Label Programming.......................................................................................................................... 168
Zone Setup......................................................................................................................................... 172
PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual10

Zone Attribute Defaults...........................................................................................................................174
System Times..................................................................................................................................... 176
Access Codes......................................................................................................................................178
PGM Programming............................................................................................................................178
System Lockout..................................................................................................................................190
System Options..................................................................................................................................190
Auto-Arm / Disarm............................................................................................................................ 194
Partition and Zone Assignment....................................................................................................... 198
Communications................................................................................................................................200
Call Directions.................................................................................................................................... 208
DLS Programming............................................................................................................................. 211
Virtual Inputs......................................................................................................................................212
Schedule Programming....................................................................................................................213
Audio Module Programming........................................................................................................... 217
Wireless Programming..................................................................................................................... 222
Alternate Communicators................................................................................................................ 223
Keypad Programming.......................................................................................................................223
Template Programming....................................................................................................................225
System information...........................................................................................................................225
Module Programming.......................................................................................................................225
Wireless Placement Testing..............................................................................................................226
Testing....................................................................................................................................................... 226
Battery Settings................................................................................................................................. 227
Restoring Factory Defaults...............................................................................................................227
Programming Worksheets..........................................................................................................................229
Troubleshooting...........................................................................................................................................230
Testing.................................................................................................................................................230
Troubleshooting................................................................................................................................ 230
[*][2] Trouble summary....................................................................................................................230
Reporting Codes...........................................................................................................................................240
Word library.................................................................................................................................................. 252
Template programming tables...................................................................................................................254
Digit 1 – Zones 1-8 Definition Options............................................................................................ 254
Digit 2 – System EOL Configuration Options..................................................................................254
Digit 3 – Reporting Code Communication Options....................................................................... 255
Digit 4 – Reporting Code Configuration Options...........................................................................256
Common Group................................................................................................................................. 257
Digit 5 - DLS Connection Options.................................................................................................... 260
ASCII Characters...........................................................................................................................................262
Wiring diagrams...........................................................................................................................................263
HS2016, HS2032, HS2064, HS2128 UL/ULC Wiring Diagram.........................................................263
11PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual

Zone Wiring........................................................................................................................................264
Bell Wiring.......................................................................................................................................... 264
PGM Wiring........................................................................................................................................ 265
Telephone line wiring........................................................................................................................265
Neo Reference Manual Feature Changes................................................................................................. 266
Regulatory Approvals.................................................................................................................................. 269
Regulatory Approvals........................................................................................................................269
Regulatory Approvals.............................................................................................................................. 269
ISED STATEMENT............................................................................................................................... 270
UL/ULC Installations..........................................................................................................................271
UL/ULC Residential Fire and Burglary Installations:............................................................................271
ULC Commercial Burglary.......................................................................................................................273
UL Central Station and Police Connect with Standard or Encrypted Line Security Service............ 273
UL Local, Central Station, Police Connect with No Line Security Service.......................................... 274
UL Home Health Care Signaling Equipment.........................................................................................274
ULC Central Station Fire and Burglary Monitoring Installations........................................................274
Programming........................................................................................................................................... 274
Control of the Protected Premises.........................................................................................................275
Bell Location............................................................................................................................................. 275
Protection of the Control Unit................................................................................................................ 275
Casual Users............................................................................................................................................. 275
User Information......................................................................................................................................275
Aux Loading and Battery Selection................................................................................................. 276
SIA False Alarm Reduction Installations: Quick Reference...........................................................277
SIA quick reference table........................................................................................................................ 278
EU Compliance Statement................................................................................................................280
Important Notes for EN50131-1 compliant systems.....................................................................281
Australia / New Zealand Regulatory Compliance..........................................................................282
New Zealand Telepermit Grant........................................................................................................282
UK Compliance Statement................................................................................................................282
Specifications For EN50131......................................................................................................................... 284
Specifications..................................................................................................................................... 284
Locating Detectors and Escape Plan..........................................................................................................288
Limited warranty.......................................................................................................................................... 291
End-user license agreement (EULA).......................................................................................................... 295
PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual12

Safety Instructions for Service Personnel
When using equipment connected to the telephone network, always follow the basic safety
instructions provided with this product. Inform the end-user of the safety precautions that must be
observed when operating this equipment.
Before Installing The Equipment
Ensure your package includes the following items:
• HS2016-4/HS2016/2032/2064/2128 alarm controller
• Power supply, direct plug-in
• Installation and user guides, including the safety instructions
Selecting A Suitable Location For The Alarm Controller
Refer to the following list to find a suitable location to install this equipment:
• Locate near a telephone socket and power outlet.
• Select a location free from vibration and shock.
• Place alarm controller on a flat, stable surface and follow the installation instructions.
• Do not locate the equipment where people may walk on the secondary circuit cable(s).
• Do not connect alarm controller to the same electrical circuit as large appliances.
• Do not select a location that exposes your alarm controller to direct sunlight, excessive heat,
moisture, vapors, chemicals or dust.
• Do not install this equipment near water (e.g., bathtub, kitchen/laundry sink, wet basement,
near a swimming pool).
• Do not install this equipment and accessories in areas where risk of explosion exists.
• Do not connect this equipment to electrical outlets controlled by wall switches or automatic
timers.
• Avoid interference sources.
• Avoid installing equipment near heaters, air conditioners, ventilators, and refrigerators.
• Avoid locating equipment close to or on top of large metal objects (e.g., wall studs).
Locating Detectors and Escape Plan for information on locating smoke and CO detectors.
Safety Precautions Required During Installation
• Never install this equipment and/or telephone wiring during a lightning storm.
• Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
• Position cables so that accidents can not occur. Connected cables must not be subject to
excessive mechanical strain.
• Use only the power supply provided with this equipment. Use of unauthorized power supplies
may cause damage.
• For direct plug-in versions, use the power supply provided with the device.
WARNING: This equipment has no mains on/off switch. The plug of the direct plug-in power
supply is intended to serve as the disconnecting device if the equipment must be quickly
disconnected. It is imperative that access to the mains plug and associated mains socket/outlet
is never obstructed.
13PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual

IMPORTANT NOTES
• This equipment is stationary-fixed with a direct plug-in external transformer or a
permanently connected internal transformer dependent on the region. It must be installed
by Skilled Persons only (Skilled Person is defined as a person with relevant education or
experience to enable him or her to identify hazards and to take appropriate actions to
reduce the risks of injury to themselves and others). It must be installed and used within
an environment that provides the pollution degree max 2, over voltages category II, in non-
hazardous, indoor locations only.
• For permanently connected versions, the fuse in the power connector serves as the
disconnecting device. The disconnect device will only remove the mains power and will not
disconnect battery power. The installer is responsible to ensure that a readily accessible
mains disconnect device is incorporated in the building for permanently connected
installations.
• There are no end user replaceable parts within this equipment.
• Before servicing, disconnect the mains power, battery and telephone connections.
• The equipment enclosure must be secured to the building structure before operation.
• All national wiring rules must be observed.
Ensure that cables are positioned so that accidents cannot occur.
• Internal wiring must be routed in a manner that prevents
- Excessive strain or loosening of wire on terminal connections;
- Damage of conductor or insulation.
• The wiring (cables) used for installation of the alarm system and accessories shall be
insulated with PVC, TFE, PTFE, FEP, Neoprene or Polyamide.
• Do not route any wiring over circuit boards
• Disposal of used batteries must be made in accordance with local waste recovery and
recycling regulations.
• Use authorized accessories only with this equipment.
• Do not place any object on the top of the cabinet.
• Do not spill any liquids on the cabinet.
• Do not touch the equipment and its connected cables during an electrical storm; there may
be a risk of electric shock.
• Save these safety instructions for future use.
• These safety instructions should not prevent you from contacting the distributor and/or the
manufacturer to obtain any further clarification and/or answers to your concerns.
PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual14

Introduction
About the System
The PowerSeries Neo alarm panel is a feature-rich, scalable alarm system designed for residential
and light commercial use. The alarm panel supports both hardwired and wireless devices. This
section lists the features of the alarm panel, available models, and compatible devices.
The following symbols are used to indicate features or methods of operation that are only available
in a particular market. No symbol indicates the feature or operation is available for all markets
unless noted specifically otherwise.
- North America
- Europe
- France
- United Kingdom
Features
The following features are available on the PowerSeries Neo alarm controller.
Zones, Wireless Keypads, Wireless Keys, Panic Pendants and Proximity Tags
• 16, 32, 64, or 128 wireless or hardwired zones supported, including 6 or 8 hardwired zones
available on the controller.
• zone types and 14 programmable zone attributes
• Up to 16 separate wireless keypads supported
• Up to 32 separate wireless keys or supported
• Up to 94 separate proximity tags supported
15PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual

Access codes
• Up to 1002 access codes: 1000 (level 2-EN) including one system master code (level 3-EN). In
addition, one installer code (level 3-EN), and one maintenance code are available.
Note: EN50131-1 compliant systems using 1000 access codes shall set the access code to
8 digits (section [041], option 02).
• Programmable attributes for each user code - See Access Code Attributes.
Programmable Outputs (PGMs)
• Up to 4 programmable outputs (PGM) on the alarm controller with 49 available options
• 22, 38, 80, 148 maximum programmable outputs6 - Armed Display
System Supervision Features
The PowerSeries Neo system continuously monitors a number of possible trouble conditions and
provides audible and visual indication at the keypad. Trouble conditions include:
• AC power failure
• Zone trouble
• Fire trouble
• Telephone line trouble
• Communicator trouble
• Low battery condition
• RF jam
• AUX power supply fault
• Failure to communicate
• Module fault (supervisory or tamper)
Additional Features
• 2-way wireless device support
• Visual verification (images + audio)
• Proximity tag support
• PGM scheduling
• Quick arming
• User, partition, module, zone and system labels
• Programmable system loop response
• Keypad and panel software versions viewable through keypad
• Doorbell zone type
• Low battery PGM type
Available Models
The following alarm controller models are available:
• HS2016-4
• HS2016
PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual16

• HS2032
• HS2064
• HS2064 E
• HS2128
• HS2128 E
Note: Not all models are available in all markets.
Model Differences
The table below lists the features of each alarm system model.
Table 1: Model Differences
Features HS2128 E HS2128 HS2064 E HS2064 HS2032 HS2016 HS2016-4
Hardwired
zones
128 128 64 64 32 16 16
Onboard zone
inputs
8888868
Wireless zones 128 128 64 64 32 16 32
Partitions 8 8 8 8 4 2 8
Users 1000 95 500 95 72 48 48
Onboard
outputs
4444224
Max outputs 148 148 80 80 38 22 24
Keypads 16 16 8 8 8 8 8
Wireless keys 32 32 32 32 32 16 16
Wireless sirens 16 16 8 8 8 4 4
Wireless
repeaters *
8888844
Proximity tags 999 94 499 94 71 47 47
Alt Comm.
phone #’s
4444444
User-
programmabl
e phone #’s
8888888
Event buffer 1000 1000 500 500 500 500 500
8-zone
expander
HSM2108
15 15 7 7 3 1 1
Power supply
HSM2300
4433333
Power supply/
high-current
output
expander
HSM2204
4433111
8-output
expander
HSM2208
16 16 8 8 4 2 2
2- way
wireless
integration
module
1111111
Audio
verification
module
HSM2955
1111111
17PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual

*For UL installations, 2 repeaters must be installed for proper signal routing.
*The "E" reference next to the model name HS2128 or HS2064 is an order code reference. Model
HS2016-4 is not UL/ULC listed.
Compatible Devices
The following devices are compatible with this alarm controller.
Note: On the table below and throughout this document, x in the model number represents
the operating frequency of the device as follows: 9 (912-919 MHz), 8 (868MHz), 4 (433MHz).
Note: Only models operating in the band 912-919 MHz are UL/ULC listed where indicated.
Only UL approved devices are to be used with UL/ULC listed systems.
Table 2: Compatible Devices
Modules
Wireless keypads HS2LCDWFxUL
HS2LCDWFPxUL
HS2LCDWFPVxUL
Hardwired keypads with 2-way
wireless integration module
HS2LCDRFxUL
HS2LCDRFPxUL
HS2ICNRFxUL
HS2ICNRFPxUL
Hardwired keypads
Note: The ICN and LED
models can be used only in
UL resi burg applications (no
UL resi fire listing).
HS2LCDUL
HS2LCDPUL
HS2ICNULUL
HS2ICNPULUL
HS2LEDULUL
Touchscreen Keypad
Note: For ULC-s559 Listed
applications the HS2TCHP
touchscreen keypad is for
supplementary use only.
HS2TCHPUL
2-way wireless integration module HSM2HOSTxUL
8-zone expander HSM2108UL
8-zone expander, 32 zones graphic
annunciator (4x HSM2208), 64 zone
graphic annunciator (8x HSM2208)
HSM2208UL HSM3632UL HSM366UL
8-output expander HSM2208UL
Power supply HSM2300UL
4 high current output expander HSM2204UL
Audio alarm verification module HSM2955
Alternate communicator 3G2080EUL
3G2080REUL
TL280EUL
TL280REUL
TL2803GEUL
TL2803GREUL
TL280LEUL
TL280LERUL
LE2080UL
LE2080RUL
TL880LTUL
TL8803G-EU
PCL-422UL
PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual18

Hardwired Devices
2-wire smoke detector System Sensor
2W-B (UL)
2WT-B (UL)
2WTA-B (UL)
C2W-BA (ULC)
C2WT-BA (ULC)
C2WTA-BA (ULC)
Refer to the device installation
manual for connections.
4-wire smoke detector System Sensor
4W-B (UL) / C4W-BA (ULC) 4-wire Standard
i3 Detector
4WT-B (UL) / C4WT-BA (ULC) 4-wire
Standard i3 Detector with Fixed 135°
Thermal Sensor
4WTA-B (UL) 4-wire i3 Detector with Fixed
135° Thermal Sensor and Sounder
4WTR-B (UL) 4-wire i3 Detector with Fixed
135° Thermal Sensor and Form C Relay
4WTAR-B 4-wire i3 Detector with Fixed
135° Thermal Sensor, Sounder and Form
C Relay
Refer to the device installation
manual for connections.
CO detector Potter Electric
CO-12/24
System Sensor
CO1224T (UL)
CO1224TR (UL)
CO1224A (ULC)
Quantum
12-24SIR
Macurco
CM-E1
Refer to
the device
installation
manual for
connections.
Mechanical Heat Detector System Sensor 5601P
5602
Refer to
the device
installation
manual for
connections.
Reverse Polarity Module
(for SD/CO interconnection)
System Sensor COSMOD2W
COSMOD4W
RRS-MOD
Refer to
the device
installation
manual for
connections.
32 zone graphic annunciator (4 x HSM2208 modules), 64 zone graphic
annunciator (8 x HSM2208 modules)
HSM3632UL HSM3664UL
Wireless Devices
Wireless PG PIR motion detector PGx904(P)UL, PGx914(P)UL
Wireless PG PIR + camera motion detector PGx934(P)UL
Wireless PG curtain motion detector PGx924UL
Wireless PG dual tech motion detector PGx984(P)
Wireless PG mirror motion detector PGx974(P)UL
Wireless PG outdoor motion detector PGx994UL
Wireless PG glass break detector PGx912, PGx922UL
Wireless PG shock detector PGx935UL
Wireless PG flood detector PGx985UL
Wireless PG temperature detector (indoor use) PGx905UL
Outdoor temperature probe (requires PGx905) PGTEMP-PROBE
Wireless PG key PGx939UL
Wireless PG key PGx929UL
Wireless PG panic key PGx938UL
Wireless PG 2-button key PGx949UL
19PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual

Wireless PG indoor siren PGx901UL
Wireless PG outdoor curtain PIR PGX902UL
Wireless PG outdoor siren PGx911UL
Wireless PG repeater PGx920UL
Wireless PG recessed contact PGx307UL
Wireless PG door/window contact PGx303UL
Wireless PG commercial contact PGx309
Wireless PG outdoor contact PGx312UL
Wireless PG CO detector PGX933UL
Wireless PG smoke/heat detector PGx936UL
Wireless PG ceiling mount detector with Smart
Presence – long range
PGX872
Wireless PG ceiling mount detector with Smart
Presence – short range
PGX862
Wireless PG door/window contact PGx975UL
Wireless PG door/window contact w/ AUX PGx945UL
Central Station Receivers
SG-System I, II, III, IV, 5
Enclosures
The PowerSeries Neo main board can be installed in the metal enclosures listed below: Tamper protection switches can be
installed on all enclosures, including door opening protection and/or removal from the mounting position. Doors can be
secured using screws or keylock.
Model PC4050C (hinged door) made of 18Ga steel, painted beige, dimensions 305mm(L) x 376mm(W) x 124mm(W)
Model CMC-1 (hinged door) made of 18Ga steel (base) and 16Ga (door), painted beige, dimensions 287mm(L) x 298mm(W)
x 94mm(H)
Model PC5006C (removable door) made of 18Ga steel, painted white, dimensions 403mm(L) x 338mm(W) x 100mm(H)
Model PC5003C (removable door) made of 22Ga steel, painted, dimensions: 248mm(L) x 298mm(W) x 76mm(H)
For EN50131-1 Grade 2 compliant installations, all holes on the side of the cabinets shall be covered (plugged) if no
accessories are installed in the cabinet that will use these mounting holes.
The equipment enclosure shall be secured to the building structure before operation. Use 4 screws (appropriate for the wall
material on which it is attached) inserted through the four mounting holes provided in the back of the enclosure base.
PowerSeries Neo HS2016/HS2016-4/HS2032/HS2064/HS2064 E/HS2128/HS2128 E Alarm Controller Reference Manual20