Jorvik Elite JET-E2 User manual

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
3
User Manual
PLEASE NOTE:
This manual is not intended to be a detailed service, repair or maintenance manual. Please seek
assistance from a qualied technician for service, repairs or maintenance.
Thank you for purchasing a Jorvik Elite Tricycle “JET Range”.
We believe this is the future of transport, not only is it an eco-friendly way of transportation of
yourself or goods in the basket but the rider will also reap the benets of a healthy body and a
healthy mind. The JET range is built with style, quality, ease of use and value for money.
The possibilities are endless but mainly it should bring a smile to your face.
HAPPY TRIKING!
Please scan the above QR code and subscribe to our youtube channel for useful hints and tips videos.

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
4
Warning
Electric trikes can be dangerous to use. The user or consumer assumes all risk of personal injuries,
damages or failures of the tricycle or system and all other losses or damages to themselves and
others and to any property arising as a result of using the tricycle.
As with all mechanical components, the tricycle is subjected to wear and high stresses. Different
materials and components may react to wear or stress fatigue in different ways. If the design life
of a component had been exceeded, it may suddenly fail possibly causing injuries to the rider. Any
form of crack, scratches or change of colouring in highly stressed areas indicate that the life of the
component has been reached and it should be replaced.
For replacement parts, technical information and warranty assistance,
please contact Jorvik Tricycles on 01904 848988 or email [e-mail]
DO NOT DISASSEMBLE, MODIFY OR REPLACE ANY OF THE ELECTRICAL PARTS.
Your insurance policies may not provide coverage for accidents involving the use of the electric
tricycle. To determine if coverage is provided, you should contact your company or agent.

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
5
Index
User Manual 3
Warning 4
Index 5
Product 6
How to assemble this tricycle 7
Hand throttle control 22
About charging 23
Battery charging 24
How to start up the trike 25
How to use the LCD display 27
Safety 28
Additional safety 30
One-year parts warranty 31

6
Product
Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
7
How To Assemble This Tricycle
Assembly Instructions
Your trike has been pre-assembled. It requires only a few
simple steps to get it ready for your rst ride.
1. Remove the outside carton after cutting the nylon bands
and taking off the lid. Carefully remove your trike from the
box and gently rest it in place.
2. Remove all of the inside cardboard protection and bubble
wrap.
3. Locate and set aside the kit box containing the pedals, this
user’s manual, and tool kit.
4. Install the front wheel by lining up the disc brake and place
the fork of the trike onto the front wheel.
Continued overpage...

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
8
How To Assemble This Tricycle
Assembly Instructions
5. Insert the quick release skewer & turn the skewer adjusting
nut clockwise to tighten it. Keep turning the adjusting nut
until you see or feel the nut contact the face of the dropout.
6. Next, try closing the lever. Your goal is to tighten the
adjusting nut enough so that the lever can be fully closed
and closing it requires signicant force. You want it to be
hard to close, you want to see a lever mark on your hand.
If the lever is not hard to close, hold the lever and further
tighten the adjusting nut, try again. If not possible to close
or its very, very hard to close, hold the lever and slightly
loosen the adjusting nut, try again. Towards the end of the
adjustment process, quite small changes, like ½ turn, of
the adjusting nut are necessary. Your goal is to tighten the
adjusting nut enough so that the lever can be closed but
requires signicant force to close. You want it to be hard to
close, you want to see a mark on your hand.

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
9
How To Assemble This Tricycle
Assembly Instructions
7. Also, be sure the movement of the lever isn’t restricted by contact with the fork.
8. All wheels may need to be trued using a spoke key.

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
10
How To Assemble This Tricycle
Fit Handlebar To Headtube
Open the stem lever by pressing down the
release catch on the left-hand side and
lifting the lever.
Loosen the adjuster bolt using a 5mm
Allen Key to drop the handlebars and
expose the centre stem bolt.
Adjust to desired height.
Tighten the bolt of the stem centre by
using a 6mm Allen key. (Make sure centre
of handlebar stem is aligned to the wheel).
Re-tighten the adjuster bolt using a 5mm
Allen Key.

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
11
How To Assemble This Tricycle
Front Fender Assembly
Please attach the new easy t front fender using the bolt already located at the rear of the forks or in the
hardware box, also attach the front light using the same bolt/bracket as shown in the images.
(There is now no need for the fender support bars.)

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
12
How To Assemble This Tricycle
Rear Fender Assembly
Fit fender brackets to the axle using the 4 Allen key bolts, then the bracket to the fender using the 2 Allen Key bolts.

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
13
How To Assemble This Tricycle
Front Basket Assembly

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
14
How To Assemble This Tricycle
Rear Basket Assembly
Place rear basket onto the axle lining up the holes and
tighten the 4 Allen key bolts.

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
15
How To Assemble This Tricycle
The Seat
Make sure that the seat is tight enough so that you can’t
twist it out of alignment. Pull the seat clamp handle away
from the seat post and slide the seat up to down to adjust
it. Move the clamp handle inward toward the seat post so
it is held tight by the clamp.
This should require a fair amount of force to ensure the
seat post is held tight.
Turning the bolt clockwise will increase the clamping force
and counter clockwise will decrease the clamping force.
Make sure the seat is not set with the vertical maximum
height marks above the clamp.

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
16
How To Assemble This Tricycle
Assembly Instructions
Use a 15mm spanner to attach and tighten the pedals
remember to grease the pedal thread rst.
Please Note: The pedals are marked “L” for Left and
“R” for right. The left pedal is attached by turning it
counterclockwise and the right pedals are tightened by
turning them clockwise. Make sure the pedals are tightly
attached to the crank arms to prevent slipping.

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
17
How To Assemble This Tricycle
Disc Brakes
Your Jorvik trike is equipped with disc brakes for maximum reliability. Applying hand pressure to the brake levers will
engage the brake pads against the brake rotor, creating friction and slowing down the wheel. The more hand pressure
applied to the brake lever, the faster the trike will come to a stop.
The rear brake should always be applied before and while the front brake is applied. Applying only the front brake to slow
or stop at high speeds may result in the rider being ejected from the saddle and continuing forward over the handlebars.
It is best to apply even pressure to both brake levers when slowing or stopping.
Tricycles equipped with disc brakes will occasionally make a slight scraping noise when the wheels are turning without
the brakes being applied. This is normal.
WARNING:
Disc brake rotors become hot during use. Do not touch or come in contact with the disc rotor shortly after use.
Wet weather will require a longer distance to stop. Brake earlier and avoid sudden stops when riding in wet conditions.

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
18
How To Assemble This Tricycle
Assembly Instructions
Make sure that the brake lever does not contact the
handlebar when full hand pressure is applied. The contact
point should feel rm and solid. If the lever travels all the
way to the handlebar or feels spongy, they may require
service by a qualied bicycle technician.
If the brakes are still not operating correctly, they may
require further adjustment by an experienced bicycle
mechanic.
New Brakes Bed-in Procedure
New brakes will require a “bed-in” procedure prior to
your rst ride, which will ensure the most consistent and
powerful braking feel.
1. Find a safe riding area that will allow for moderate
speed. Remain seated during the entire procedure for
optimal results.
2. Accelerate the trike to a moderate speed, then rmly
squeeze the brake levers until you are at walking
speed. Repeat this process about twenty times.
3. Accelerate the trike to a faster speed, then rmly
squeeze the brake levers until you are at walking
speed. Repeat this process about ten times.
IMPORTANT NOTE:
Do not lock up the wheels at any point during the bed-in
procedure.

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
19
How To Assemble This Tricycle
Front Suspension Travel And Sag Guide
Sag is a measurement of the amount of suspension
fork travel with the rider stationery in their normal riding
position. The Sag depends on the position and weight
of the rider and should be between 15% and 30% of the
fork’s max travel depending on the intended use and
preferences.

Jorvik JET-E2Elite Mid-Drive Dual Battery Electric Folding Tricycle
20
Gears
Your Jorvik JMT model trike is equipped with 7 speed nexus
hub gear driven system. The rst gear is for easier and
uphill pedalling, and the last gear is for maximum speed
on level or downhill terrain. Change gears only while
pedalling. When the grip shift nexus gear selector shows
‘1’ you are in the rst gear, or the lowest gear. When
it displays ‘7’ you are in the highest gear. Adjustments
require the ne tuning and should only be made by a
qualied technician.
Avoid changing gears very rapidly from rst gear to the
last gear or vice versa.
How To Assemble This Tricycle